Difference between revisions of "Team:Paris Bettencourt/Notebook/Microbiology"

Introduction

The microbiology team aims to identify wine stain degrading microorganisms.

Basing this bioremediation-inspired approach on the two following articles:

• Bioremediation of phenol by alkaliphilic bacteria isolated from alkaline lake of Lonar, India
  P.P. Kanekar, S.S. Sarnaik and A.S. Kelkar. Journal of applied microbiology supplement 1999.
• Bacteria Subsisting on Antibiotics
  Gautam Dantas, Morten O. A. Sommer, Rantimi D. Oluwasegun, George M. Church. Science2012

We hypothesize that these microorganisms could be preferably discovered in vineyard soil samples.
Indeed, it is highly probable that a rich-anthocyanin environment such as a vineyard, would host microbes with the desired degradation skills. In addition, the chance to find a microbe able to digest efficiently a wine stain, with its proper anthocyanin composition, in terms of anthocyanin diversity, and abundance, is theoretically increased.
To ensure the widest microorganisms diversity, we used soil samples from all around the world (Australia, Spain, Namibia, France, Croatia), particularly through collaboration with different iGEM teams. This bacteria identification was based on two different approaches:

• We are creating a bacterial database. It implies culture of the bacteria on different selective and non-selective media, and characterization of the strains. This identification was managed through 16s rRNA PCR, known as the most common housekeeping genetic marker in bacteria. At the end, we would test the database directly on fabrics stained with wine, or only anthocyanin, looking for color degradation. We also plan to build a phylogenetic tree based on our database that would help us understanding how related are the species able to degrade anthocyanin.

The main advantage here is to select potential useful bacteria from soil, isolate them, and screen all of them, on fabrics, thanks to a high throughput assay. Nevertheless, it implies a selective bias, as some interesting microorganisms may not grow in the media we chose, or cannot compete with other microorganisms present in the soil.

To tackle this problem, we also followed another approach:

• We screened our samples for a microorganism growth directly on anthocyanin-enriched media, and for anthocyanin degradation by absorbance measurement. The idea here is to screen for bacteria that could use anthocyanin as their sole carbon source, and thus degrade it, or that could simply metabolize it. After identification of potential interesting microorganisms, we would isolate them, characterize them, and then test them on stained fabrics.

Therefore, the main point of our team is to put in evidence already existing anthocyanin-degradation metabolism in nature, so that we could isolate the enzymes, and potentially optimize them thanks to the binding domain team results.

Week 27th June - 3rd July

The first step is to define a systematic protocol for the selection of microorganisms from our samples.
It includes :

1. Determine samples conditions of collection, storage, and treatment before microbes culture.
2. Determine the selective and nonselective media we will use for culture and the number of dilutions per samples.
3. After streak and isolation, determine an efficient way to characterize the strains.
4. For the second approach, where we test directly an anthocyanin-degradation natural metabolism, define the controls.

Therefore, during this week, we focused our work reading articles dealing with bioremediation and isolation of bacteria from soil samples.
Nonetheless, we rapidly had to tackle the following issue: Such approaches implies protocols of microorganisms culture on anthocyanin enriched media or even as a single carbon source. Or, anthocyanin isolation and purification is hard to achieve, and consequently, this chemical compound is really expensive. We cannot afford to buy it in high quantity.

Considering this problem, we decided to take a deeper look in the anthocyanin chemical structure, so that we could potentially find a cheaper substitute molecule for our assays.

Anthocyanin is a phenolic compound which belongs to the Flavonoid family. Flavonoids have a basic structure of C6–C3–C6. Depending on their structures, flavonoids may be classified into about a dozen groups, such as chalcones, flavones, flavonols and anthocyanins.


If we take a deeper look in the anthocyanin structure, we observe that it’s composed of :

• a chroman ring
• an additional aromatic ring on C2

There are 31 different monomeric anthocyanins known. They differ from number and position of the hydroxyl and/or methyl, ether groups.
But, 90% of the naturally occurring anthocyanins are based on only six common anthocyanidins. among them :

• Cyanidin,the major form in nature
• Malvidin, the most commonly found in wine

As we can see in this figure, they only differ by their cycle B groups, so the chroman ring remains unchanged.
Therefore, we believe that enzymes able of degrade a lot of different types of anthocyanins would preferably attack the chroman ring structure as it is well conserved among the family.
Thus, we thought that the ideal cheap substitute molecule should present a very similar basic structure.

After some researches, Quercetin, a flavonol molecule, appeared to be a good competitor.
We can in fact see that the only difference remains in the presence of a carbonyl group in 4. Another advantage is that Quercetin is present in Wine, and is partly responsible for its color. Thus, even though the assays may find some enzymes able to degrade specifically quercetin instead of anthocyanin, we should have a decrease in the wine stain color intensity. In addition, because of the co-pigmentation chemical interaction between quercetin and anthocyanin, degrading quercetin could also have an impact on anthocyanin stability.

For these reasons, quercetin was chosen as our substitute molecules for running the microbiological assays.

However, in parallel, we decided to develop a protocol for purifying anthocyanin from grapes, so that we could also tests our microbes directly on anthocyanin. (See the Anthocyanin section for the evolution of the protocol).

Week 11th - 17th July

We are looking into the microbes that could be able to degrade quercetin.
Because we want a high diversified database, we asked iGEM team from all around the world to send us soil,grape and grape's leaves samples.

At the end of the competition, we got samples from Melbourne and Macquarie iGEM teams in Australia, from Valencia iGEM team, from Barcelona iGEM team from INSA-Lyon iGEM team, but also from Namibia, Croatia, Algeria, from Cochin and Clos Montmartre in Paris and from Grignon and Suresnes in France.


Also, we are looking into some human gut strains for their quercetin degradation ability.
Indeed, wine is know for its cardiovascular protect effect. And we figured out that the compound enabling this effect is actually phenol compound.
On top of that, quercetin and anthocyanin seems to be the most powerful wine antioxydant, and mostly explain this cardiovascular protector effect .
The epithelium from the gut is not able to digest the flavonoid and to cleave it into phenol compound. That's why it is higly probable that the microbiome is responsible for its degradation.
If we were able to isolate some bacteria from human feces on quercetin plate, we may have some very interesting results.
The problem is that we need an authorization to work with human sample. We sent a request for it but it may take a lot of time, with the hope of a quick answer.
Zhang Z, Peng X, Li S, Zhang N, wang Y, Wei H (2014) Isolation and Identification of quercetin Degrading Bacteria from Human Fecal Microbes. PLoS ONE 9(3): e90531. doi:10.1371/journal.pone.0090531

In the same way, It would also be very interesting to work with herbivorous animals, as they eat a lot of flavonoids, responsible for many plants color.
So we can expect that some microbes isolated from these animals' gut could also degrade theses flavonoids into phenolic compounds.
But once again we need some authorizations to work on animals samples.

Week 17th - 25th July

We discovered Church's article, describing the isolation of antibiotic degrading bacteria from soil samples. It appears that the goal was very similar to ours, the only difference remaining in the nature of the molecule.
As they wanted to isolate bacteria that can grow on antibiotics as a unique carbon source, their main concern was carbon contamination from the soil sample.

To avoid this contamination they inoculated the samples in a SCS (single carbon source) liquid medium. They let it grow seven days at 22°C then use the broth to inoculate a new SCS liquid medium.
This step is repeated two more times. Then the culture broth is plated on SCS plate and the degrading bacteria is isolated. In these conditions the carbon from the soil is consumed during the first cultivation steps and the bacteria that cannot use antibiotics as a carbon source do not survive during the next cultivation step.

However, this protocol seems to have some issues.

• It take 21 days before plating to isolate the microorganisms, this is very long.
• Microorganisms that can degrade quercitin without using it as a single carbon source won't be selected.

As we found in several papers, the regular technique to isolate microorganisms from the soil is to dilute the sample on PBS and directly plate on agar. A dilution of 10^(-1) correspond to a dilution of 1g of soil in 9 mL of PBS.

Filtration of the soil sample

A member from the protein group told us that he used a different protocol to isolate a toluene degrading bacteria. In fact, yo remove the carbon contamination from the soil he filtered the sample with a 0.22µL filter. Then he cultivated the filter in a liquid medium before plating. We decided to test this protocol.

We filtrate a solution of soil sample under vacuum.
Then we place the filter (with the microbes stuck in it without carbons sources) in an erlenmeyer with some M9 + Quercetin. And we waited for a few days.
We had the same results as the protocole with soil sample diluted at 10^-3.
And as you can see in the picture, the green color is disappearing and some fungi is growing in the media.

Screening assay design

In church lab's article, they cultivate the bacteria at 22°C and pH 5.5 . We found that pH 5.5 inhibit most bacterial growth so we decided to stay at a neutral pH.
We did not have an incubator that could be set at a temperature of 22°C, after a discussion with our advisors and a microbiologist from Cochin hospital it was decided that 30°C should be sufficient for our experiement. Some bacterial species would not survive at 30°C but a sufficient number would, and they may grow faster at 30°C than at 22°C.

We decided to chose 5 dilutions, from 10^(-2) to 10^(-6). Instead of only plating at the end of the 3 liquid cultivation, we decided to plate 100 μL of medium just after inoculation and at the end of each cultivation. The goal of this experiment is to know the dilution needed and to test the impact of the several liquid medium cultivation steps.

We decided to chose 4 different medium (for broth and plate).
-M9 : a medium with salts but no carbon source, this is our negative control medium, if something grows on that medium, it means that there is a carbon contamination.
-M9 glucose (M9 G) : M9 salts plus 1g/L glucose, this medium is our positive control, if nothing grows on it, it means that there were no bacteria in the medium.
-M9 quercetin (M9 Q): M9 salts plus 1g/L quercetin (similar condition than in Church's article), this is the medium where we want to isolate bacterias.
-M9 glucose quercetin (M9 GQ) : this medium is necessary to test if quercetin is toxic for microorganisms. Indeed if we have less growth than in M9 glucose it could mean that quercetin is toxic.

As it is done in church's protocol the incubation time between each cultivation step is 7 days.

Week 25th - 31th July

Quercetin medium preparation

As soon as the quercetin was purchased from Sigma®, we decided to start the assay. However it was found that unlike anthocyanin, quercetin was mostly insoluble in water. This is a major issue for medium preparation as the organisms could not be able to degrade an insoluble molecule in a liquid broth.
But it as also a problem for quercitin quantification, as we thought at the beggining that we could measure the degradation of quercetin with the absorbance, which is not possible if quercitin isn't soluble.

We tried to solubilize quercetin at different concentration in water and ethanol : 1g/L, 0.1g/L, 0.01g/L and 0.001g/L . We did not succeed in dissolving totally the quercetin, so an absorbance assay was impossible.
However, even at 1g/L the liquid was a little yellow, so quercetin was at least slightly soluble.
We thought that the little quantity of soluble quercetin could be enough for growth, as long as the medium is agitated and the quercetin constantly solubilized during the consumption.
So we decided to start the assay anyway. Me managed to have relatively homogenous plate.

Results after two days

Growth results in plate:
• The control plates with M9 showed growth until 10^(-3), that means that if we want to avoid carbon contamination in plate, we need to dilute the samples at 10^(-3) at least
• The plate with M9 G always showed growth. Even in the more diluted samples there was microorganisms.
• The plates with M9 QG showed less growth than the plate with M9G and there was no growth after a dilution of 10^(-3), it could mean that quercetin is toxic for some organisms.
The plates with M9 QG showed growth until a dilution of 10^(-2) because of the carbon contamination.

This part of the experiment seemed compromised as there was no growth in the condition M9Q at a dilution were there was no carbon contamination (below 10^(-3))

Growth results in tubes:

• M9 growth with a dilution of 10^-2, the carbon contamiation is avoided with a dilution of 10^-3 and below.
• M9 G groth in every tube, there is always microorganisms in the samples.
• M9 Q and M9 QG, it is difficult to say, the quercitin is precipitated and it seams that the experiment is a failure, that the quercetin cannot be used in liquide medium, maybe because the agitation is too low.

Week 01th - 7th August

Results after a week in solid medium

In plates : The results were surprising. In the plates of dilution of 10^(-2) and 10^(-3), with or without glucose, we could see transparent circles. The quercetin seemed to have disappeared. In the middle of these circles there was always something that looked like a filamentous fungi.

As we can see it is easy to identify the cicle were the yellow disappear. The organisms in the center always look like that. This is very similar to a fungi, with the hyphae in the middle and spores in the whole circle. It is to be noted that it is written that the dilution is 10^(-1). This is an annotation mistake. At the beginning we did not counted the initial dilution of the soil sample in water. We have considered that our original sample was 1g of soil in 9mL of water.

results after a week in liquid medium

In liquid medium : With dilution of 10(-2) and 10(-3), in quercetin glucose and in M9 quercetin, there was fungal growth and it seemed that the quercitin was consumed (the medium was less yellow).

Tube with quercitin
Tube with fungal growth (dilution 10^(-2),medium M9Q)

conservation of the material

In liquid and solid medium there seems to have a degradation of the quercetin and it is easy to identify and to isolate the seems to be responsible of the degradation. However in these organisms look like filamentous fungi. As our laboratory has no experience with fungi we decided to keep the plates at 4°C before working with them.

Week 8th-14th August

Filamentous fungi good lab practice

We looked for protocol to work safely with fungi. We found a quite complete fungi protocol book "Laboratory protocol in fungal biology" (M. Ayyachamy and al). There was a safety part. The more important was to prevent spore contamination, ethanol is not sufficient to kill fungal spores. A way to disinfect the hood needed to be found. It was said in the book to disinfect with bleach between every experiment and , at the end of the day, to disinfect during 20 minutes with a strong disinfectant like those used in hospitals.

We were able to obtain the disinfectant SURFA’SAFE preminim of the laboratory Anios from the microbiologist of Cochin. It was decided with our advisor to disinfect with bleach between each fungi (to avoid contamination of the different fugi) and, before someone else use the hood, to disinfect during 20 minutes with anios.

Quercetin analysis

We tried to solubilize quercetin. Quercitin was almost insoluble, even at a concentration of 1mg/L the quercetin precipitated. We tried to heat it but after 1 hour of eating the quercetin was still not solubilized. We thought that the solubility of the molecule was of 200g/L so we were very surprised. However we looked again on sigma Aldrich information and that was a solubility in DMSO, an organic solvent.
[photo needed]
We tried to solubilized 1mg of quercetin in ethanol, without results.
[photo needed]
The insolubility of quercetin seemed to be not a real problem for the microorganisms, both in liquid and solid medium. However we wanted to quantify it by absorbance. An insoluble molecule can’t be quantified by absorbance. But Maybe we could use DSMO or another solvent were quercetin was soluble.
Another problem was the separation between the cells and the quercetin. We tried to filter a sample of water with quercetin with a 0.22 mum² filter. All the pigment stayed fixed to filter. The pores were much bigger than the quercetin. It seemed that the quercetin has a strong affinity to the membrane.
[photo needed]
As the quercetin is mostly insoluble in water a centrifugation was a way to remove the cells and the pigment from the broth. All we needed, than, was a medium were the quercetin was soluble, preferably not an expensive and toxic organic solvent.

Week 15th-21th August

Fungal strains collection

We had all we needed to work with filamentous fungi. We isolated the identified strains and inoculated them in Sabourdaud Dextrose Agar, a common plate for filamentous fungi culture. After 4 days the plates were covered of mycelium. Then we inoculated them on M9Q agar Plate and in M9 plates.

test in liquid medium

The isolated fungi were tested in 3 liquid medium :
-M9
-M9 + 1g/L quercetin
-M9 + 1g/L quercetin + 1g/L glucose
there was also a blank without fungi

Second assay

In order to reproduce the experiment another assay was conducted in the same conditions than the first one we used another samples of the soil of Cochin. However a mistake was made and distilled water was used to dilute the samples instead of PBS.

Quercitin analysis

We wanted to see if the disappearance of the color in plates could be due to a pH modification. So we took 1g/L of quercetin and changed the pH with hydrochloric acid. There was no color change at a pH of 1.5.
[photo]

Then we added base and there was a change. Around a pH of 12 we could see a solubilization of quercetin. After a pH of 12.5 quercetin was completely solubilized. The color was orange instead of yellow. There was no color change between a pH of 12.5 and 13.5.
[photo]

We had solubilized quercetin. We managed to solubilize up to 50g/L of quercetin in alkaline water. We had found a way to solubilize quercetin.

[Photo]
We did the absorbance spectrum and we could see that the maxiumum of absorbance was at 315nm.

We decided to found the link between quercetin concentration and absorbance. We did an calibration.

The R² is good, that confirm that the calibration is working. We have a relation between absorbance and concentration : A = 56,767*C, that mean that C=1/(56,767)*A

Finally C = 0,176*A

Week 22th-28th August

Result of the second assay

There was growth on M9 glucose and M9 quercetin glucose for plates for dilutions of 20^(-2) and 10^(-3). However the variability was much less important. No quercetin degradation organisms were found. This might be due to the osmotic choc caused by the dilution of the samples in distilled water.

Third assay

We did a third assay with a soil sample from Croatia. The conditions were the same than for the two first assays (with PBS and not distilled water !)

Fungal isolation

There was still growth on M9Q plates, we could still see the circle of quercetin degradation. It was confirmed that the strains have been isolated.

Week 29th August-4th September

Third assay

We choosed to make a simple selection process.

For that we put some soil sample at 10^-3 of dilution in a single carbon source liquid media. The only carbon source is Quercetin at 1g/L.
We waited for 4 days with the falcon tubes in the shaking incubator at 30°C. In an other hand, we made an other experiment with two carbon sources: Quercetin and Glucose both at concentration of 1g/L.
The idea was to give a chance to some strains that are not maybe able to use Quercetin as a carbon source, but able to destroy this coumpound with some other pathway that recognize and destroy toxic coumpounds.
By providing them glucose, we could maybe maintain them alive and in the meantime theses strains will be able to degrade Quercetin.

We had also a negativ and a positiv control.
The negativ control was M9 Quercetin without any microbes.
The positive control was Pseudomonas putida. We made also some condition with M9 + Glucose with the positiv control, the negativ control, and the two different soil sample we assayed.
This was done to have an idea of the consuption of glucose by the different strains by measuring the growth of these bacteria at OD 600 nm.
We wanted to see if the degradation of Quercetin is enhanced or inhibited by the presence of glucose.






Surprisingly, Glucose didn’t have the effect we expected.
Pseudomonas was slower but almost unaffected in its degradation of Quercetin while, the microbes from the two soil sample were not able to degrade Quercetin!
We thought that the diauxie phenomena described by Monod, could explain these results.

It is important for us because it’s a way of understanding how the strains are using the Quercetin: is it used as a carbon source via the carbon cycle for growth of the strains or, is it used by another pathway that do not permit the growth of the microbe but is effective in the degradation of the Quercetin (for a toxic compound for instance)
The problem is that Quercetin is not soluble. This prevent us of doing a kinetic experiment to see the evolution of the growth of a strain with quercetin and glucose at the same time by measuring OD600nm.
Netherless, we tried to make an experiment to see if there was a glucose repression with Pseudomonas when we put at the same concentration (1g/L) Glucose and Lactose.



As you can see on the graph M9+P+G+L (M9+Pseudomonas+Glucose+Lactose) there is no shift in the growth curve of Pseudomonas in presence of Glucose and Lactose.
That means there is no Glucose repression. Further reading of paper confirmed us that there is no Glucose repression for Pseudomonas putida.

We tried to find a new method to measure the growth of strains in liquid media in the presence of Quercetin by measuring absorbance at 600nm.
We tried to solubilize Quercetin in mineral oil and make an emulsion with a two phase solution: Quercetin in the oily phase, Strains in the water phase.

As you can see, when we begin to shake the emulsion, the séparation in two phase is not perfect and Quercetin pass through the aquaous phase.

We made some plating at different time: time0, time2, time4.
The idea was to explain the absence of bacteria in our experiments. Indeed, when we were making theses experiment, we always had at the end fungi at the end.
But should have also some bacteria because bibliography shows that some bacteria are able to degrade Quercetin. By plating at different time we hope to see the difference of diversity of microbes in the plate.
Unfortunatelly, we were not able to observe some bacteria on Quercetin agar plate. In fact, the Quercetin is green and it’s hide the bacteria that are growing on the plate.
During two days we didn’t see any growth of microbes and at day 3, fungi appears.
We have to keep in mind also that fungi, thanks to micellium are able to search for nutrients in the plate while bacteria are not. There is a sort of competition between bacteria and fungi for the use of Quercetin.




Above: two fungi isolated on M9 Quercetin agar plate. We can easily see a clear halo that mean the Quercetin was removed from the plate by the fungi.

Week 5th-11th September

Separation in two project

At this point we divided the project in two approaches:
-The goal of the first approach (approach 1) is making a huge library of strains that were isolated from soil sample.
We would like, from a given soil sample, to isolate as much as we can of bacteria diversity.
Then we could test each strain on Quercetin liquid media and report Quercetin degradation.
Thanks to our collaboration with other iGEM team, we have sample from some place all around the world.
We would like to compare the diversity of bacteria between each soil sample taken from all around the world from vineyard for instance.

At the end we will have a library with some strains that are able to degrade Quercetin and some other that are not.
We could quantify the strength of the degradation and also make a link between the species that are able to degrade the Quercetin to make hypothesis about a common enzyme responsible for this degradation.

To achieve that, here are the step of the protocol for approach 1:

We plate at 10^-3 dilution (we choose this dilution thanks to previous experiments) to the soil sample on a non-selective agar media (LB, TSA, M9Glucose) but also on selective media (FTO for micrococcus, Agar from Mossel for Bacillus Cereus, M9 Quercetin).
We incubate for one or two days at 30°C.
When we have some colonies, we restreak all of them on LB or TSA plate in order to isolate a maximum of different strains. Once the restreak bacteria grew enough, we give them a name to store them in the library.

FS_M69 stand for Frank&Stain_Microbesgroup69

For a given strain we have the date of the stock, the species once its sequenced, the original agar media from where it was taken, the origin of the strain etc…

Then we make an overnight culture in Tryptic Soy Broth and systematically we characterise our strain with a 16sPCR from colonies restreaked on LB plates.
When the overnight culture is over, we inoculate 100ul of this directly in a 5ml M9 1g/L Quercetin falcon tube in triplicate. We also make two glycerol stocks. One at -80°C the other at -20°C (to be reused more easily).
For the assay on liquid media Quercetin, we are quantifying Quercetin degradation.
We are able to see Quercetin degradation thanks to the absorbance. Quercetin in solution is not soluble at least just a little. So we cannot detect absorbance at a pH=7.



But, when we put our solution at pH=12, we are able to see a nice absorbance spectrum with a peak of absorption around 315nm.
With a dilution a hundred times in NaOH we are able to have a good absorbance value for Quercetin degradation.



To see if there was a degradation, we need to use a negative and a positive control.
The negative control is just M9 + Quercetin. The positive control is M9 + Quercetin + Pseudomonas Putida.
Indeed, some article show that Pseudomonas is a good candidate for Quercetin degradation. The iGEM Evry team gave us this strain to use it for our assay.
We made an experiment to check how long does pseudomonas needs to degrade Quercetin.
We found that 4 days are enough to see a significant decrease in Quercetin absorbance. But to give a chance to every strains we will assay, we decided to make a 6 days experiment.

Week 12th-18th September

We designed the experiment with a Quercetin quantification at Time 0 and at Time 6 to see the evolution of Quercetin concentration.

We used Pseudomonas Putida K2440 as a positive control.
We made two sample: at T0 to make sure that each tube had the same amount of Quercetin. And at T6 because it’s enough to see a significant decrease in Quercetin concentration if there is a strain able to use it as a carbon source.
All culture were made in triplicate.
To present data, we made a ratio of the absorbance at T6 over the absorbance at T0 for every culture. Then we average the three values. And we are able to calculate the standard deviation.
The value in y axis are a percentage of remaining Quercetin.

Here you can see the T6 sample. We took 100µl from the 5ml culture after vortexing it and we put it in a eppendorf tube. Then we add 900µl of NaOH 0.5mM solution at pH=12.
You can see the difference on each tube depending of the % of Quercetin remaining.


As you can see, none of the strains are able to degrade Quercetin except or positive control.
The problem is that these strains were collected from M9 Quercetin plates.
So at least we were expecting some Quercetin degradation.
We suggest that it was a problem with the dilution factor. Indeed 10^-3 is maybe not enough as a dilution factor. The problem is that we are not able to see on Quercetin plate colonies when we restreak them to make sure they are pure.
Because of the green color, we are just able to see big colonies.
The other important point is that some strains are not able to use Quercetin as a carbon source to grow. These strains won’t be selected with this technique using a single source carbon. But these strains maybe able to degrade Quercetin as a toxic compound.
Here are the first 16S PCR we did for strains 52 to 104. We have to notice that 16S rRNA is present in every bacteria, which means that this PCR is really sensitive : if there is contamination of the strain, usually e.coli in a lab, it's 16s rRNA can be amplified instead of the desired strain's. Knowing that, we did numerous negative control to ensure that our PCR were pure, and that no contamination interfere with our sequencing procedure, following exactly the same PCR protocol but without adding bacteria to the mix. Thus, all the PCR were maid under the hood, which was anyway essential for our safety, as we were working with unknown bacteria isolated from soil, in order to identify them All the PCR were made at the same time which explain why the negative control don't appear in all the gels

C stands for control : here, you can see that they are completely negative, which means no contamination should have interfered with our samples.

Week 19th-25th September

So for the next assay we chose to increase the amount of cells in the media.
We inoculate 500 µl instead of 100 µl of overnight culture in 5 ml of M9 Quercetin liquid media.
Also, concerning plating, we noticed that we most of the time had more or less 4 species of bacteria on non-selective agar. That is annoying because our aim is to have a maximum of bacteria diversity for the database.


Yellow plots are some contamination with some fungi in it. But we have at least 3 strains that seems to be very efficient in the degradation.
We took these strains and we plate them from the liquid media to some agar plate and then we re sequenced them to make sure they are the same as those previously tested.



So as shows this histogram, we have some good results with E.coli K12 (a strains known to degrade Quercetin but in a different pathway as Pseudomonas Putida.
The strains B1 and B2 are strains that were taken from Anthocyanin degradation assay.
The strains number 75 seems to be very promising.



The inoculation was the same as last assay (500ul of overnight culture.
The important thing to notice is that the strains 96, 97, 98, 99, 102, 103, 104 were taken from M9 Quercetin Plate.
We were expecting a degradation...

One reason of this failure maybe that the overnight culture were not enough fresh. Indeed, we had some troubles to organize our self to test so many strains. Some overnight culture were 5 days old before we assayed them.
In fact our 6 incubators are all busy because of the assay, so we have to wait until one is free to begin the assay.
We will organize ourself better next time to avoid this kind of problems.


For this assay we had one contamination and also no degradation from the other strains.



In this experiment we tested also the strains from F1 to F8 that were isolated on Quercetin plate. As you can see, only F4 give a good result with the liquid experiment.
Strains 118 to 136 come from non selective plate (LB agar, Tryptic Soy Agar, M9 agar)


For this experiment, we tested also 5 E. coli strains that were designed by the Protein group to express some enzyme reponsible for Anthocyane degradation. We had no results with these strains but there is maybe a problem of enzyme secretion. We should restart the experiment with cell extract.

Week 26th September-2th October

For this experiments, the strains come from Australia. We isolated them on non selective agar plate.

Week 9th-16th October

For this assay, the strains 190 to 200 are mostly pseudomonas, that explains the Quercetin degradation.



We isolated a lot of Pseudomonas from strains 201 to 222 that's why we had that much degradation in Quercetin.

Finally with the 9 experiments we made to assay 187 strains, we were able to produce this histogramme.


To be more clear and avoid confusion with the name of the strains we renamed all the strains we have tested on Quercetin degradation. We named them with a S.number if the strain was isolated on a Selective media (M9 + Quercitin agar). We named them NS.number is the strain was isolated on a Non Selective media.
In this histogram, the strains are rated by chronological order. At the beginning of our experiments, we had only strains isolated on Quercetin that worked on Quercetin degradation. That seems legit!
But then we tested more and more NS strains and we had more positiv results, especially in the end of our experiments when we tested on Australia sample and we had lot of Pseudomonas.

Week 17th-19th October

We made some kinetic of the most promising strains to see the evolution of Quercetin degradation. All the culture were made in triplicate.

As you can see, there is some variations in the absorbance that make the curve non linear. Here we choosed to not show the standard deviation to make the graph more clear.

To make the graph easier to understand, we choosed to normalized every daily absorbance by the control: Abs(strains)Tx/AbsTx(control).
Thanks to that we have an easy graph to read. on the Y axis wxe can read the % of Quercetin remaining.




We sent to genome sequencing the strains FS_M75(Lysinibacillus), B2(Stenothrophomonas maltophilia), B3(Oerskovia paurometabola), FS_M121(Microccocus luteus).
We would like to compare between theses species the enzyme present in common responsible for Quercetin degradation.

To finish our project, we assayed two strains FS_M75 and Pseudomonas putida with real wine stain on cotton fabric.

The first experiment was made by putting a circle of cotton into a beaker with wine and then drying it by waiting a few hours.
We had some cells that were in a transparent media composed of M9. This M9 is composed by cells without LB (LB have been removed by centrifugation, cells were re-suspended in PBS).
And we have composed of M9 without strains and the piece of cotton with the wine stain.



As you can see, the results are not evidential. It seems that our negative control wash the wine stain in an as efficient way as the two other strains!

We redo the experiment but we waited three days until the cotton was enough stained. Then we autoclaved the cotton to make sure there is no others microorganisms. Then, we made the same condition as before.

We made also an experiment with the platform the assay group designed.
We made three different dilution and we tested once again the ability of Pseudomonas and FS_M75 to degrade wine stain at 30°C.