One of the fundamental aspects when establishing a directed evolution approach is to grant an advantage to the individuals with favorable
+
properties. In our setup we coupled correct binding properties of our Evobody proteins to a growth advantage in the form of a gradual
+
ampicillin resistance. To determine the applicability of this resistance and how selective pressure can be applied, we did several fermentations
+
to characterize the used strain.
+
</div>
+
<div class="container text_header"><h3>Shaker flask cultivation with varying antibiotic concentrations</h3></div>
+
<div class="container text">
+
When communicating with industry associated experts, one question we were constantly asked was:"Why do you use ampicillin? Is ampicillin an adequate
+
selection marker?" We thought about the possibility to use other antibiotics as our resistance marker, but as a huge part of our selective system was based on the beta-lactamase, we were hesitating to change our system.
+
So, to determine whether or not ampicillin was suitable for our projects goals, we designed a series of experiments of cultivations using
+
different setups regarding
+
resistancy and a broad range of different ampicillin concentrations. The strain which we used was meant to immitate our final construct.
+
That is why we transformed <i>E. coli</i> JS200 with pHSG-EPPolI and pSB1AK3. We cultivated 25 ml LB in 250 ml shaker flasks at 37°C and 150 RPM.
+
Inoculation was done to gain an initial optical density of 0.1. The ampicillin concentration was varied between 0 g/l and 10 g/l.
+
Additionally kanamycin and chloramphenicol were added at adequate concentrations to grant plasmid stability. All Experiments were also
+
done with a JS200 strain containing the pHSG-WTPolI plasmid to determine possible differences when cultivated under ampicillin.
<figcaption class="figure-caption"><b>Figure 1: Growth curve of JS200 containing pWTPolI and pSB1AK3.</b>Growth curve of JS200 strains containing pHSG-pWTPolI and pSB1AK3
+
The cells were cultivated between 10-16 h in LB Medium. The medium was supplemented with adequate concentrations of kanamycin, chloramphenicol and 0, 0.1, 1.0, 3.0, 5.0 and 10.0 g/l ampicillin.</figcaption>
<figcaption class="figure-caption"><b>Figure 2: Growth curve of JS200 containing pEPPolI and pSB1AK3.</b>Growth curve of JS200 strains containing an error prone DNA polymerase I pHSG and pSB1AK3
+
The cells were cultivated between 12-18 h in LB Medium. The medium was supplemented with adequate concentrations of kanamycin, chloramphenicol and 0, 0.1, 1.0, 3.0, 5.0 and 10.0 g/l ampicillin. </figcaption>
+
</figure>
+
As you can see in Figures 1 and 2 higher ampicillin concentrations have a major impact on the growth properties of the strain containing the
+
error prone DNA polymerase I. However the strain containing the plasmid carrying the wildtype DNA polymerase I is almost not influenced by
+
a raised ampicillin concentration. The differences in ampicillin sensibility may be caused by the low fidelity property of the <a href="http://parts.igem.org/wiki/index.php?title=Part:BBa_K2082106">error prone
+
polymerase I</a>. The different activities directly influence the ColE1-like plasmid pSB1AK3 and connected to this, the beta-lactamase presence in culture.
+
Based on this results, we decided that ampicillin is indeed an adequat selective marker for our system, as long as we keep the quantitative aspect of the beta-lactamase expression as low as possible.
+
To achieve this, we integrated our reporter construct into the genome of the <i>E. coli</i> strain we were using.
+
As it can be seen in Fig. 1 and Fig. 2, the lower the plasmid copy number, the more influence has ampicillin.
+
+
It can be seen in Figure 2 that a higher ampicillin concentration is directly associated to the elongation of the lag phase of the respective culture.
+
As our selection construct is meant to express beta-lactamase corellating with the binding properties of our Evobodies,
+
we switched to different fermentation methods to change ampicillin concentration over time.
+
<ul>
+
<li>
+
Continous cultivation with a secondary feed in a turbidostat
+
</li>
+
<li>
+
Repeated batch fermentation with different ampicillin concentrations per cycle
+
</li>
+
</ul>
+
However, as our selection system directly correlates to the expression of the beta-lactamase, we can assume that a selective advantage through higher beta-lactamase expression would have the same impact as a lower ampicillin concentration.
+
But what does this mean in context of the ability of ampicillin to work as a selection marker?
+
+
<div class="container text_header"><h3>Usage of a low budget turbidostat to increase selective pressure</h3></div>
+
<div class="container text">
+
To further characterize the mutation system used in our evolutionary process, we used a low budget turbidostat provided by the departement of molecular
+
biotechnology of the University of Potsdam. After doing reversion tests in shaker flasks we took the leap to the turbidostat and applied selective pressure
+
in form of antibiotics. By doing a continuous fermentation while constantly increasing the ampicillin concentration in the Medium
+
feed, we were able to optimize the revertant frequency in culture. Inoculation was done with <i>E. coli</i> JS200 <a href="http://parts.igem.org/wiki/index.php?title=Part:BBa_K2082106">pEPPolI</a> and freshly transformed
The complete setup can be seen in figure 3. After autoclaving for sterilization the antibiotics were added under sterile conditions. To
+
increase the selective pressure a second feed bottle was connected to the primary feed and 2 g/l Amp LB has been pumped with a rate of about
+
18 ml/h. The primary feed was adjusted to keep the OD in the bioreactor at 0.5. To sustain a minimum of thermal degradation the 2 g/l Amp LB was stored
+
on ice for the duration of cultivation. A clean inoculation was done through a septum in the fermenter lid. To provide constant conditions the whole fermenter
+
was placed in a 37°C incubator and 10x Amp LB was pumped through an opening in the incubator seal.
<figcaption class="figure-caption"><b>Figure 3: Turbidostat overview.</b> Setup of continuous fermentation using a turbidostat: 1. Waste bottle
+
2. Fermenter and computational unit containing stirrer, temperature sensor, optical density sensor, 20 ml reactor vial and arduino based controller. 3. Power supply
+
and pump unit, containing air and feed pump. 4. Primary feed bottle. 5. Secondary feed pump. 6. Laptop with user interface. 7. Chilled 2 g/l Amp LB reservoir.</figcaption>
+
</figure>
+
+
As you can see in figure 4
+
the culture reached the target OD within 7 h and dropped rapidly when the medium feed diluted the cell suspension. However, the population regenerated quickly and reached the target
+
OD of 0.5 after about 18 h. After fermentation the population was screened for revertants to calculate reversion frequency. The results of these experiments can be read <a href="https://2016.igem.org/Team:Bielefeld-CeBiTec/Results/Mutation/Reversion">here</a>.
<figcaption class="figure-caption"><b>Figure 4: Growth curve of <i>E. coli</i> JS200 containing <a href="http://parts.igem.org/wiki/index.php?title=Part:BBa_K2082106">pEPPolI</a> and <a href="http://parts.igem.org/wiki/index.php?title=Part:BBa_K2082151">earlyStop beta-lactamase</a>.</b>Growth curve of
+
<i>E. coli</i> JS200 containing <a href="http://parts.igem.org/wiki/index.php?title=Part:BBa_K2082106">pEPPolI</a> and <a href="BBa_K2082151">earlyStop beta-lactamase</a>. Cultivation was done at 37°C for 18 h and target OD was set
+
to 0.5.</figcaption>
</figure>
</figure>
−
+
</div>
−
+
+
+
</div>
</div>
+
</div>
</body>
</body>
</html>
</html>
Latest revision as of 21:48, 19 October 2016
Fermentation
Culture drives great results. - Jack Welch
Introduction
One of the fundamental aspects when establishing a directed evolution approach is to grant an advantage to the individuals with favorable
properties. In our setup we coupled correct binding properties of our Evobody proteins to a growth advantage in the form of a gradual
ampicillin resistance. To determine the applicability of this resistance and how selective pressure can be applied, we did several fermentations
to characterize the used strain.
Shaker flask cultivation with varying antibiotic concentrations
When communicating with industry associated experts, one question we were constantly asked was:"Why do you use ampicillin? Is ampicillin an adequate
selection marker?" We thought about the possibility to use other antibiotics as our resistance marker, but as a huge part of our selective system was based on the beta-lactamase, we were hesitating to change our system.
So, to determine whether or not ampicillin was suitable for our projects goals, we designed a series of experiments of cultivations using
different setups regarding
resistancy and a broad range of different ampicillin concentrations. The strain which we used was meant to immitate our final construct.
That is why we transformed E. coli JS200 with pHSG-EPPolI and pSB1AK3. We cultivated 25 ml LB in 250 ml shaker flasks at 37°C and 150 RPM.
Inoculation was done to gain an initial optical density of 0.1. The ampicillin concentration was varied between 0 g/l and 10 g/l.
Additionally kanamycin and chloramphenicol were added at adequate concentrations to grant plasmid stability. All Experiments were also
done with a JS200 strain containing the pHSG-WTPolI plasmid to determine possible differences when cultivated under ampicillin.
Figure 1: Growth curve of JS200 containing pWTPolI and pSB1AK3.Growth curve of JS200 strains containing pHSG-pWTPolI and pSB1AK3
The cells were cultivated between 10-16 h in LB Medium. The medium was supplemented with adequate concentrations of kanamycin, chloramphenicol and 0, 0.1, 1.0, 3.0, 5.0 and 10.0 g/l ampicillin.Figure 2: Growth curve of JS200 containing pEPPolI and pSB1AK3.Growth curve of JS200 strains containing an error prone DNA polymerase I pHSG and pSB1AK3
The cells were cultivated between 12-18 h in LB Medium. The medium was supplemented with adequate concentrations of kanamycin, chloramphenicol and 0, 0.1, 1.0, 3.0, 5.0 and 10.0 g/l ampicillin.
As you can see in Figures 1 and 2 higher ampicillin concentrations have a major impact on the growth properties of the strain containing the
error prone DNA polymerase I. However the strain containing the plasmid carrying the wildtype DNA polymerase I is almost not influenced by
a raised ampicillin concentration. The differences in ampicillin sensibility may be caused by the low fidelity property of the error prone
polymerase I. The different activities directly influence the ColE1-like plasmid pSB1AK3 and connected to this, the beta-lactamase presence in culture.
Based on this results, we decided that ampicillin is indeed an adequat selective marker for our system, as long as we keep the quantitative aspect of the beta-lactamase expression as low as possible.
To achieve this, we integrated our reporter construct into the genome of the E. coli strain we were using.
As it can be seen in Fig. 1 and Fig. 2, the lower the plasmid copy number, the more influence has ampicillin.
It can be seen in Figure 2 that a higher ampicillin concentration is directly associated to the elongation of the lag phase of the respective culture.
As our selection construct is meant to express beta-lactamase corellating with the binding properties of our Evobodies,
we switched to different fermentation methods to change ampicillin concentration over time.
Continous cultivation with a secondary feed in a turbidostat
Repeated batch fermentation with different ampicillin concentrations per cycle
However, as our selection system directly correlates to the expression of the beta-lactamase, we can assume that a selective advantage through higher beta-lactamase expression would have the same impact as a lower ampicillin concentration.
But what does this mean in context of the ability of ampicillin to work as a selection marker?
Usage of a low budget turbidostat to increase selective pressure
To further characterize the mutation system used in our evolutionary process, we used a low budget turbidostat provided by the departement of molecular
biotechnology of the University of Potsdam. After doing reversion tests in shaker flasks we took the leap to the turbidostat and applied selective pressure
in form of antibiotics. By doing a continuous fermentation while constantly increasing the ampicillin concentration in the Medium
feed, we were able to optimize the revertant frequency in culture. Inoculation was done with E. coli JS200 pEPPolI and freshly transformed
earlyStop beta-lactamase.
The complete setup can be seen in figure 3. After autoclaving for sterilization the antibiotics were added under sterile conditions. To
increase the selective pressure a second feed bottle was connected to the primary feed and 2 g/l Amp LB has been pumped with a rate of about
18 ml/h. The primary feed was adjusted to keep the OD in the bioreactor at 0.5. To sustain a minimum of thermal degradation the 2 g/l Amp LB was stored
on ice for the duration of cultivation. A clean inoculation was done through a septum in the fermenter lid. To provide constant conditions the whole fermenter
was placed in a 37°C incubator and 10x Amp LB was pumped through an opening in the incubator seal.
Figure 3: Turbidostat overview. Setup of continuous fermentation using a turbidostat: 1. Waste bottle
2. Fermenter and computational unit containing stirrer, temperature sensor, optical density sensor, 20 ml reactor vial and arduino based controller. 3. Power supply
and pump unit, containing air and feed pump. 4. Primary feed bottle. 5. Secondary feed pump. 6. Laptop with user interface. 7. Chilled 2 g/l Amp LB reservoir.
As you can see in figure 4
the culture reached the target OD within 7 h and dropped rapidly when the medium feed diluted the cell suspension. However, the population regenerated quickly and reached the target
OD of 0.5 after about 18 h. After fermentation the population was screened for revertants to calculate reversion frequency. The results of these experiments can be read here.
Figure 4: Growth curve of E. coli JS200 containing pEPPolI and earlyStop beta-lactamase.Growth curve of
E. coli JS200 containing pEPPolI and earlyStop beta-lactamase. Cultivation was done at 37°C for 18 h and target OD was set
to 0.5.
