Difference between revisions of "Team:Goettingen/Experiments"

Latest revision as of 03:35, 20 October 2016

Experiments

Overview of Experiments

1. Production Strains

Following strains were cultivated:

Escherichia coli DH5alpha: DSMZ
Raoultella planticola DSM 3069 (ATCC 33531): DSMZ
Shimwelia blattae DSM 4481 (ATCC 29907) : DSMZ

In order to ensure that the bacteria we are working with are really the ones we want to work with, a 16S rDNA PCR was performed.

As an antibiotic resistance will be used in our later experiments to select transformants, we checked for any native antibiotic resistance against ampicillin, kanamycin, tetracyclin and chloramphenicol in an LB agar plate growth test. It turned out that kanamycin was the only antibiotic, against which none of our strains showed any resistance. For this reason, we decided to use only vectors with kanamycin resistance for our later projects.

After this, we prepared electro competent cells from our strains. All of our strains were grown on LB medium.

2. BioBricks

Our BioBricks were designed using the software SnapGene. The original Genes for our B₁₂ binding proteins, and the torA signal sequence were codon optimized for E. coli.

The DNA containing the Genes were synthesized and friendly provided by IDT Integrated DNA Technologies.

In case of torA-mutB, the length of the gene exceeded the maximum length of 2000 bp from IDT. For this reason, we designed two DNA parts, with a natural occurring HindIII restriction site at both ends. We intended to fuse these both genes by ligation. However, after having diffuculties to fuse the genes by ligation, we decided to fuse them by fusion PCR. In order to multiply the DNA for our cloning experiments, and to equip our genes with restriction sites, PCR was used.

For our purpose, we were searching for a vector with (a) kanamycin resistance and (b) araBAD operon. We thus decided to use the pBAD202 expression system. This vector, however, is equipped with a thioredoxin fusion protein which increases the rate of expression, but prohibits the physiological function of our protein. For this reason, we designed primers for an autarkic Synporter protein. In order to test the dependence of the expression system on the B₁₂ export rate, we also decided to use different other vectors.

For vector ligation, we used a standart ligase reaction, for the pBAD202 expression, which works without ligation but topoisomerase reaction, we followed the manufacturer's protocol.

Fig. 1:Our Synporter genes torA-btuF and torA-glmS cloned into the pBAD202 plasmid, separated from the thioredoxin fusion protein.

3. Transformation and Cultivation

For our transformation experiments, we used electroporation for all our self prepared competent cells. For the heat competent E. coli Top10 cells provided with the pBAD202 expression system, we used the manufacturer's heat shock transformation protocol.

For vector multiplication, E. coli cells (Top10 for pBAD202 plasmids, DH5alpha for all other plasmids) were transformed with the constructed plasmids. After the transformation, the cells were cultivated on LB Medium. Transformants were selected, and the respective clones were picked, cultivated in LB medium, and plasmids were extracted.

The Plasmids were then introduced into the production strains Raoultella planticola ATCC 33531 and Shimwellia blattae ATCC 29907.

For the expression experiments, the all cells were cultivated and the expression induced in RM medium under aerobic conditions. As S. blattae and R. planticola are known to produce Vitamin B₁₂ only under anaerobic conditions, the expression was induced under anerobic conditions in MM medium.

The induction was performed using different concentrations of l-arabinose and different induction time spans.

4. Expression Test

To test for the expression of our Synporter protein, the cell lysates of the expression cultures we submitted to an SDS-PAGE. From the SDS Gels, Western Blots were performed using anti-Poly-Histidine-tag antibodies.

In order to test the translocation of our Synporter proteins, the cells were fractionated into Periplasm, Spheroplasts, and Cytoplsma (gained by French Press cell disruption) as a control.

5. Vitamin B₁₂ Assays

To test the physiological function of our Synporter protein, different assays for B₁₂ detection were performed. For the assays, the periplasm and cytoplasm fractions of the cells were examined.

The periplasm fraction of the producing cells was gained by centrifugation.

5.1. Microbial Assay

The microbial B₁₂ assay relies on the growth diameter of the E. coli DSM4261 strain on an agar plate, in dependence of the Vitamin B₁₂ (or methionine) concentration in the medium.

For this purpose, agar plates with synthetic Guttman medium (free of B₁₂ and amino acids, 1.5% agar-agar) were prepared. The E. coli detection cells were grown in liquid synthetic Guttman medium supplemented with selected amino acids (no methionine) and Vitmamin B₁₂. Afterwards, the cells were washed with PBS buffer three times, in order to make the cells virtually free of Vitamin B₁₂. The cells were resuspended in PBS buffer, and mixed with warm, liquid Guttman medium (free of B₁₂ and amino acids, 0.8% agar-agar), and then poured on the prepared agar plates. For the assay, small paper platelets (usually used for antibiotic tests) were placed on the top agar layer, and soaked with differently concentrated calibration solutions of Vitamin B₁₂. The plates were incubated overnight, and the diameters measured after 16 h. From the different diameters, dependent of the Vitamin B₁₂ concentration, a calibration curve was calculated.

In order to determine the B₁₂ content of our periplasm and cytoplasm fractions, the assay plates were prepared exactly as described above, and paper platelets were soaked with the respective solution. Comparing to the calibration curve, the diameter indicates the B₁₂ amount.

5.1. Photometric Assay

In order to determine the Vitamin B₁₂ concentration of a sample photometrically, the corrinoids in our samples needed to be converted into dicyano cobalamine. This was achieved by treating the samples with sodium cyanide or potassium cyanide. Other components like proteins and lipids which would distort the measurements, can easily be separated by precipitation through acidic and basic conditions as well as heating and subsequent centrifugation.

After measuring a spectrum of the supernatant from 350 to 650 nm, the Vitamin B₁₂ concentration could be calculated with help of the extinction coefficients of dicyano cobalamine.

Protocols

Media

LB Medium

Component	Amount
Tryptone	10 g
NaCl	10 g
Yeast extract	5 g
optional:
Agar-agar	15 g

Add components to ddH₂O and adjust volume to 1 L.
Autoclave for 20 min at 121°C.

M9 Minimal Medium

Component	Amount
Na₂HPO₄	10 g
KH₂PO₄	10 g
NH₄Cl	5 g
NaCl	15 g

Add components to ddH₂O, adjust the pH to 7.0 and bring the volume to 987 mL.
Autoclave for 20 min at 121°C.
Add the following

Component	Stock solution	Amount
Glucose	20%	10 mL
MgSO₄ · 7 H₂O	1 M	1 mL
Thiamine · HCl	30 mM	1 mL
CaCl₂	0.13 M	1 mL

RM Medium

The dehydrated medium is distributed by Laboratories Conda (Cat. 1542) and was prepared according to protocol.

MM medium

Mineral medium with additon of yeast extract

Component	Amount
K₂HPO₄	14 g
KH₂PO₄	6 g
(NH₄)₂SO₄	3 g
MgSO₄ · 7 H₂O	0.2 g
Yeast extract	0.2 g
CoCl₂ (50 mM)	85 µL
SL-4	1 mL

Add components to ddH₂O, adjust the pH to 7.5 and bring the volume to 1 L.
100 mM glycerine are added seperatly to the medium.

SL-4: Trace element solution (Pfenning and Lippert, 1966)

Component	Amount
EDTA-Na₂	5 g
FeSO₄ · 7 H₂O	2 g
ZnSO₄ · 7 H₂O	0.1 g
MnCl₂ · 4 H₂O	0.03 g
H₃BO₄	0.3 g
CoCl₂ · 6 H₂O	0.2 g
CuCl₂ · 2 H₂O	0.01 g
NiCl₂ · 6 H₂O	0.02 g
NaMoO₄ · 2 H₂O	0.03 g

Add components to ddH₂O, adjust the pH to 6.7 and bring the volume to 1 L.
The solution is stored at 4°C and protected from light.

Guttman Medium (B₁₂ Assay)

Component	Amount
K₂HPO₄	14 g
KH₂PO₄	6 g
(NH₄)₂SO₄	2 g
MgSO₄ · 7 H₂O	0.2 g
Na₂citrate · 2 H₂O	1 g
L-Asparagine	0.8 g
L-Arginine	0.2 g
L-Glutamic acid	0.2 g
Glycine	0.2 g
L-Tryptophan	0.2 g
L-Prolin	0.2 g
L-Histidine	0.2 g
Vitamin B₁₂	40 µg

Add components to ddH₂O, adjust the pH to 6.8-7.2 and bring the volume to 1 L.
50 mM glucose have to be added seperatly before the inoculation.

Cultivation and Transformation

Cultivation of Escherichia coli

For preperation of competent cells and cloning, the E. coli strains DH5α and TOP10 are grown in LB medium at 37°C.

For expression studies of constructs in pBAD202, E. coli TOP cells are grown in LB medium supplemented with 1 mg/mL Vitamin B₁₂ and 50 µg/mL kanamycin.

Cultivation of Raoultella planticola

For preperation of competent cells and cloning, R. platicola is grown in LB medium at its temperature optimum of 30°C.

For expression studies of constructs in pBAD202, R. planticola is grown under anaerobic conditions in MM medium supplemented with 50 µg/mL kanamycin.

Cultivation of Shimwellia blattae

For preperation of competent cells and cloning, the S. blattae is grown in LB medium at 37°C.

For expression studies of constructs in pBAD202, S. blattae was grown under anaerobic conditions in MM medium supplemented with 50 µg/mL kanamycin.

Preparation of Electrocompetent Cells

Material to prepare

2x 5 mL LB
250 mL LB in 1 L Erlenmeyer flask with chicane
500 mL sterile Millipore-H₂O at 4°C
50 mL sterile glycerol (10% (w/v)) at 4°C
30 sterile labeled Eppendorf cups at – 20°C or -80°C
1x sterile GS3 jar at 4°C
1x Aquatron at 30°C
1x Sorvall RC6 centrifuge at 4°C
1x Universal 320R centrifuge at 4°C
1 L liquid nitrogen

Day 1

Inoculate 2x 5 mL LB (if required with antibiotics) with your strain of interest, either from cryo culture or from agar plate.
Incubate overnight at 37°C and 150 rpm.

Day 2

Inoculate 250 mL LB (without antibiotics) with 2% (5 mL) preculture.
Incubate in the Aquatron at 30°C and 160 rpm until OD₆₀₀ of 0.5-0.8.
Check the culture via microscope for contaminations.

All liquids and containers must be cooled on ice. The major task of cell preparation is the removal of salts. In case of some strains like pLys-strains, the pellets must be resuspended very carefully.

Let the cells (OD₆₀₀ of 0.5-0.8) cool down in ice water for 10-20 min. All further steps are performed under cool conditions.
Decant the cells in sterile GS3 jar and centrifuge at 4°C and 5000 rpm (4230 g) for 5-10 min.
Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4°C ddH₂O.
Centrifuge the GS3 jar at 4°C and 5000 rpm (4230 g)for 5-10 min.
Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4°C ddH₂O.
Centrifuge the GS3 jar at 4°C and 5000 rpm (4230 g)for 5-10 min.
Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4°C glycerol (10% (w/v)). Afterwards, transfer the culture into a 50 mL Falcon tube.
Centrifuge the Falcon tube at 4°C and 6200 rpm (4230 g) for 5-10 min.
Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4°C glycerol (10% (w/v)).
Centrifuge the Falcon tube at 4°C and 6200 rpm (4230 g) for 5-10 min.
Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 500 µL sterile 4°C glycerol (10% (w/v)).
Aliquot the cells into the Eppendorf cups (40 µL per Eppendorf cup). While aliquoting, filled Eppendorf cups must be frozen directly in liquid nitrogen.
Store the filled Eppendorf cups in a cryobox at -80°C.

Transformation of Electrocompetent Cells by Electroporation

Mix 50-200 ng plasmid DNA with 40 µL of competent cells (always defrost on ice!). Transfer attempt into precooled electroporation cuvette. Incubate on ice for 10 min.
Important: DNA must be salt free! Use either directly in ddH₂O eluted plasmids, or (e.g. directly after ligation) desalt the DNA for 30 min on a Millipore filter (MF Membrane Filters).

Electroporation: 2500 V for 2 mm cuvettes (1250 V for 1 mm cuvettes), 25 µF, 200 Ω, discharging time should be 3-5 msec. Contacts of the electroporation cuvette must be dry. Remove all air bubbles before electroporation.
Immediately add 960 µL liquid LB (or, if available, SOC medium for a higher transformation efficiency) into the cuvette and transfer the content into a 2 ml Eppendorf cup.
Incubate at 37°C and 150 rpm for 1 h. Fix tube in horizontal position with tape.
Plate 100 µL of 10^-3 to 10^-6 dilutions on plates with selection pressure
Incubate at 37°C overnight.

Transformation of Chemically Competent Cells by Heat-Shock

One Shot^®TOP10 Competent cells (ThermoFisher) were transformed following the respective protocol for chemical transformation:

Add 3 µL of the TOPO^®Cloning Reaction into a vial of competent E. coli cells and mix gently by inverting.
Incubate on ice for 5-30 min.
Heat-shock the cells for 30 s at 42°C without shaking.
Immediately transfer the tubes on ice.
Add 250 µL of S.O.C. medium (RT), cap the tube tightly and shake it horizontally (200 rpm) at 37°C for 1 h.
Spread 100-200 µL of different volumes or dilutions from each transformation on a prewarmed selective plate and incubate overnight at 37°C.
Pick colonies for analysis.

Plasmid preparation

Small scale preparation of plasmid DNA was performed using the NucleoSpin^® Plasmid kit distributed by Macherey-Nagel (REF 740588) according to protocol.

PCR methods

PCR with Phusion DNA Polymerase

Phusion^® High-Fidelity DNA Polymerase is used for all standard PCR amplifications.

Pipetting scheme

Component	20 µL reaction	50 µL reaction	Final concentration
Nuclease-free water	to 20 µL	to 50 µL
5X Phusion HF buffer	4 µL	10 µL	1X
10 mM dNTPs	0.4 µL	1 µL	200 µM
10 µM forward primer	1 µL	2.5 µL	0.5 µM
10 µM reverse primer	1 µL	2.5 µL	0.5 µM
Template DNA	variable	variable	1 pg - 10 ng
DMSO (optional)	(0.6 µL)	(1.5 µL)	3%
Phusion DNA Polymerase	0.2 µL	0.5 µL	0.02 U/µL

Mix all components, adding the DNA polymerase last and spin down.

Cycling

Step	Temperature	Time	Cycles
Initial Denaturation	98°C	30 s	1
Denaturation	98°C	10 s	25-35
Annealing	X°C	30 s
Extension	72°C	15-30 s/kb
Final Extension	72°C	10 min	1
	4°C	hold

To optimize the annealing temperature for each primer pair, a temperature gradient can be run.

Fusion PCR

Fusion PCR was performed according to Harrison et al.

Pipetting scheme

Component	50 µL reaction	Final concentration
Nuclease-free water	to 50 µL
5X Phusion HF buffer	10 µL	1X
10 mM dNTPs	1 µL	200 µM
50 mM MgCl₂	1.25 µL	1.25 mM
10 µM forward primer	1 µL	0.2 µM
10 µM reverse primer	1 µL	0.2 µM
Template DNA	variable
DMSO	1.5 µL	3%
Phusion DNA Polymerase	0.5 µL	0.02 U/µL

Mix all components, adding the DNA polymerase last and spin down.

Cycling

Step	Temperature	Time	Cycles
Initial Denaturation	98°C	1 min	1
Denaturation	98°C	10 s	4
Annealing	68 ± 4°C	30 s
Extension	72°C	40 s
Denaturation	98°C	10 s	27
Annealing	68 ± 4°C	30 s
Extension	72°C	50 s
Final Extension	72°C	10 min	1
	4°C	hold

To optimize the annealing temperature for each primer pair, a temperature gradient can be run.

16S rDNA Colony PCR

16S rDNA PCR was performed to check the identity of the bacterial strains we were working with. For this, colonies were picked and resuspended in 50 µL ddH₂O.

Pipetting scheme

Component	Amount
Nuclease-free water	to 50 µL
Optibuffer	5 µL
10 mM dNTPs	5 µL
5 mM forward primer (16S08)	4 µL
5 mM reverse primer (150UR)	4 µL
Template DNA	1 µL (suspension)
MgCl₂	3 µL
BIO-X-ACT DNA Polymerase	0.5 µL

Mix all components, adding the DNA polymerase last and spin down.

Plasmid Construction

Digestion of DNA with Restriction Enzymes

Plasmid DNA and PCR products were digested according to FastDigest protocol (Thermo Scientific).

Component	Plasmid DNA	PCR product
Water, nuclease free	15 µL	17 µL
10X FastDigest or 10X FastDigest Green buffer	2 µL	2 µL
DNA	2 µL (up to 1 µg)	10 µL (~0.2 µg)
FastDigest enzyme	1 µL	1 µL

Mix gently and spin down.
Incubate at 37°C in a heat block or water thermostat for X min.
Inactivate the enzyme by heating for X min at X°C.

Comment: Incubation time and inactivation time and temperature depend on the applied FastDigest enzyme and were done according to the respective protocol.

If the FastDigest Green Buffer was used in the reaction, an aliquot of the reaction mixture can be loaded directly on an agarose gel.

Phosphorylation of DNA

MutB2 DNA was phosphorylated with T4 Polynucleotide Kinase (T4 PNK) according to protocol (NEB, #M0201).

Component	Amount
DNA	up to 300 pmol of 5' termini
T4 PNK Reaction Buffer (10X)	5 µL
ATP (10 mM)	5 µL
T4 PNK	1 µL (10 units)
Nuclease-free water	up to 50 µL

Prepare reaction mixture on ice.
Incubate at 37°C for 30 min.
Heat inactivate at 65°C for 20 min.

Ligation

Ligations were either done with T4 DNA ligase distributed by Invitrogen (Cat. No. 15224-017) or by Thermo Scientific (#EL0014).

Invitrogen

Prepare the following reaction mixture and spin briefly.

Component	Amount/concentration
5X ligase buffer	4 µL
vector DNA	3-30 fmol
insert DNA	9-90 fmol
T4 DNA ligase	0.1 U
ddH₂O, autoclaved	to 20 µL

Incubate at 16°C over night.
Heat-inactivate at 65°C for 10 min.

Thermo Scientific

Prepare the following reaction mixture and spin briefly.

Component	Amount/concentration
10X ligase buffer	2 µL
vector DNA	20-100 ng
insert DNA	1:1 to 5:1 molar ratio over vector
T4 DNA ligase	1 U
ddH₂O, autoclaved	to 20 µL

Incubate at RT for 1 h or at 16°C over night.
Heat-inactivate at 65°C for 10 min.

Blunt End Ligation

Blunt end ligations were done with T4 DNA ligase distributed by Thermo Scientific (#EL0014).

Prepare the following reaction mixture and spin briefly.

Component	Amount/concentration
10X ligase buffer	2 µL
vector DNA	20-100 ng
insert DNA	1:1 to 5:1 molar ratio over vector
50% PEG 4000 solution	2 µL
T4 DNA ligase	5 U
ddH₂O, autoclaved	to 20 µL

Incubate at RT for 1 h.
Heat-inactivate at 65°C for 10 min.

pBAD Directional TOPO^® Cloning

The D-TOPO^® cloning reaction of pBAD202 was performed according to protocol (Thermo Scientific, K420201). A 0.5:1 to 2:1 molar ratio of PCR product to vector was used.

Component	Chemically competent cells	Electrocompetent cells
Fresh PCR product	0.5-4 µL	0.5-4 µL
Salt solution	1 µL	-
Dilute Salt Solution (1:4)	-	1 µL
ddH₂O	add to a final volume of 5 µL	add to a final volume of 5 µL
TOPO^® vector (pBAD202)	1 µL	1 µL
Final volume	6 µL	6 µL

Mix reaction gently and incubate for 5 min at RT.
Place the reaction on ice and proceed directly with the transformation of electrocompetent or chemically competent cells.

DNA Purification

DNA purification after PCR and restriction was performed using different kits

SureClean Plus distributed by Bioline (BIO-37047)
DNA Clean & Concentrator™-25 distributed by Zymo Research (D4033)
NucleoSpin^® Gel and PCR Clean-up distributed by Macherey-Nagel (REF740609)

The procedures were done according to the respective protocol.

Analytic Tests

Agarose Gel Electrophoresis

For agarose gel electrophoresis, 1.0% agarose gels were prepared. For analytical purpose, the gels were run with the parameters U=90 V, I=400 mA, t=60 min. For preparative purpose, the gels were run with the parameters U=120 V, I=400 mA, t=35 min.
Afterwards, the gels were stained in ethidium bromide solution, and then analyzed by UV light.

Gel extractions of DNA were performed using the NucleoSpin^® Gel and PCR Clean-up kit distributed by Macherey-Nagel (REF740609).

Expression Test

In preperation for expression studies, the constructs in pBAD202 were transformed into E. coli TOP10, R. planticola or S. blattae cells. The respective cultivation conditions (medium, temperature) are listed in “Cultivation and Transformation”. The expression assay was done as described in the D-TOPO^® protocol.

For each transformant, inoculate 2 mL of medium containing 50 µg/mL kanamycin with a single recombinant colony.
Grow overnight with shaking (225-250 rpm) to OD₆₀₀ = 1-2.
The next day, label five tubes for each transformant and add 10 mL medium (50 µg/mL kanamycin) to each tube.
Inocculate each tube with 0.1 mL of the overnight culture.
Grow the cultures with vigorous shaking to an OD₆₀₀= ~0.5.
Prepare four 10-fold serial dilutions of 20% arabinose with sterile water (e.g 2%, 0.2%, 0.02%, and 0.002%).
Remove a 1 mL aliquot of cells from each tube, centrifuge at maximum speed in a microcentrifuge for 30 s and aspirate the supernatant. Freeze the pellet at -20°C as a zero time point sample.
Add arabinose to the five 9 mL cultures according to the following table.

Tube	Stock Solution	Volume [mL]	Final concentration
1	0.002%	0.09	0.00002%
2	0.02%	0.09	0.0002%
3	0.2%	0.09	0.002%
4	2%	0.09	0.02%
5	20%	0.09	0.2%

Grow with shaking for 4 h.
Take 1 mL samples at 4 h and treat as described for the zero time point sample.

Analyze the samples by suspending the pellets in 80 µL 1X SDS-PAGE sample buffer.
Boil 5 min and centrifuge briefly.
Load 5-10 µL of each sample on an SDS-PAGE gel and electrophorese.

Cell Fractionation

Harvest 500 mL of cells from an induction experiment by centrifugation and wash three times with 0.9% NaCl.
Resuspend the pellet in 2 mL buffer P (pH 8.0) and incubate for 20-30 min on ice.

Component	Concentration
Tris-HCl	100 mM
Sucrose	20% (w/v)
EDTA	100 mM

Centrifuge for 5 min (14000 rpm, 4°C) and carefully remove the supernatant which contains the periplasm.
Resuspend the pellet in 2 mL buffer P and incubate for 20-30 min on ice.
After another centrifugation for 5 min (14000 rpm, 4°C) the supernatant with the spheroplasts can be carfully removed.
The samples can either be stored at -20°C or directly used for analysis.

SDS PAGE

Acrylamid Stocksolution (AA)

40% Acrylamide 4x cryst.- Mix 37.5:1 (Biomol 54535; stored at 4°C)

Resolving gel Stocksolution (RG)

Component	Amount
Tris-HCl	18.2 g
SDS	0.4 g

Add components to ddH₂O, adjust the pH to 8.8 with HCl and bring the volume to 100 mL.
Store at 4°C.

Stacking gel Stocksolution (SG)

Component	Amount
Tris-HCl	6.1 g
SDS	0.4 g

Add components to ddH₂O, adjust the pH to 6.8 with HCl and bring the volume to 100 mL.
Store at 4°C.

10x running buffer

Component	Amount
Tris-HCl	30.3 g
Glycine	144.1 g
SDS	10 g

Add components to ddH₂O and bring the volume to 1 L. The pH should bea around 8.4.
Store at RT.

4x SDS Loading Dye

Component	Amount
Tris-HCl	0.4 g
SDS	1.2 g
Glycerine (87% w/v)	7.5 mL
β-Mercaptoethanol	2.5 mL
Bromphenol blue (2%)	0.5 mL

Add Tris-HCl and SDS to ddH₂O and adjust the pH to 6.8.
Add the rest of the compnents and bring the volume to 50 mL
Store at -20°C.

Ammoniumpersulfat (APS)

10% APS (w/v) in ddH₂O
Store at -20°C.

Pipetting schemes for one gel

Component	Resolving gel 10%	Stacking gel 4%
AA	1 mL	0.2 mL
RG	1 mL	-
SG	-	0.48 mL
ddH₂O	2 mL	1.32 mL
TEMED	3 µL	2 µL
APS	30 µL	15 µL

Component	Resolving gel 15%	Stacking gel 4%
AA	1.5 mL	0.2 mL
RG	1 mL	-
SG	-	0.48 mL
ddH₂O	1.5 mL	1.32 mL
TEMED	3 µL	2 µL
APS	30 µL	15 µL

Preperation of SDS-Gels

Glass plates, combs and spacers are cleaned with EtOH (70%) and assembled.
The resolving gel solution is prepared with TEMED and APS added last for polymerisation. The solution is poured between the assembled galss plates and covered with isopropanol.
After polymerisation, the isopropanol is removed and the stacking gel is prepared and poured on top of the resolving gel. The combs need to be inserted immediatly.
After polymerisation, the gels can either be put into the electrophoresis chamber with 1x running buffer or stored at 4°C in a bag with wet tissue.

Preperation of samples

Samples are mixed with SDS loading dye (4:1), denaturated at 95°C for 5 min and breifly centrifuged.
Up to 15 µL of a sample are loaded into one well.

SDS-PAGE

After loading the samples and a protein marker onto the gel, it is run for 15 min with an electric current of 15 mA current (per gel). Afterwards, the gel is run with an electric current of 30 mA (per gel).

Staining with Coomassie-Brilliant-Blue

The following solutions have to be prepared.

Staining solution

Final concentration	Component	Amount
0.05%	Coomassie-Brilliant-Blue R 250	0.5 g
25%	Isopropanol	250 mL
10%	Acetic acid	100 mL

Dissolve the components in ddH2O and bring the volume to 1 L.
The solution can be used more than once and is stored at RT.

Fixation solution

10% acetic acid

Place the SDS-gel in a box with staining solution and heat in the microwave.
Incubate the gels on a rocker until protein bands become visible.
Wash the gel with water and discolour it in fixation solution for several hours or overnight.

Western Blot

For Western Blot an Anti-His antibody (Anti-His (C-term)/AP) was used.

The following solutions need to be prepared for the procedure.

10x TBS buffer

Final concentration	Component	Amount
0.1 M	Tris-HCl (MW 121.14)	6.057 g
1.4 M	NaCl (MW 58.44)	40.91 g

Dissolve the components in ddH₂O, adjust the pH to 7.4 and bring the volume to 500 mL.
Store at RT.

1x Transfer buffer

Final concentration	Component	Amount
25 mM	Tris-HCl (MW 121.14)	3.029 g
192 mM	Glycine (MW 75.07)	14.41 g
	Methanol	200 mL

Dissolve the components in ddH₂O and bring the volume to 1 L. The pH should be between 8.1 and 8.4.
Store at RT.

10x TBS-Tween buffer

Final concentration	Component	Amount
0.1 M	Tris-HCl (MW 121.14)	6.057 g
1.4 M	NaCl (MW 58.44)	40.91 g
0.1%	Tween20	0.5 mL

Dissolve the components in ddH₂O, adjust the pH to 7.4 and bring the volume to 500 mL.
Store at RT.

Blocking Solution

Dissolve 2.5 g skim milk in 50 mL 1x TBS buffer.
It has to be prepared freshly.

Phosphatase buffer

Final concentration	Component	Amount
0.1 M	Tris-HCl (MW 121.14)	6.057 g
0.1 M	NaCl (MW 58.44)	40.91 g
5 mM	MgCl₂ x 6 H₂O (MW 203.3)	0.51 g

Dissolve the components in ddH₂O, adjust the pH to 7.4 and bring the volume to 500 mL.
Store at RT.

In preparation for the Western Blot, a SDS-PAGE with a Protein Ladder, which is compatible with Western Blot, has to be run.

Prepare 6 gel sized Whatman paper and gel sized blot membrane by soaking them in 1x Transfer buffer.
Set up the Western Blot. Place 3 moist Whatman papers on the anode (base of blotter), followed by the moist membrane, the unstained SDS-gel, 3 moist Whatman papers and the cathode (lid of blotter).
Blot at 200 mA (1 gel) and constant 10 V for 1 h.
Wash the membrane three times for 5 min with 1x TBS buffer on a rocker.
Block with 50 mL 1x TBS buffer with 5% skim milk for 1 h or over night on a rocker.
Wash three times for 15 min with 1x TBS buffer on a rocker.
Incubate with antibody solution (14 mL 1x TBS-Tween buffer + 200 µL 1x TBS buffer/5% skim milk + 7 µL antibody) for 2 h on a rocker.
Wash two times shortly with 1x TBS-Tween buffer.
Wash once with 1x TBS-Tween buffer for 15 min on a rocker.
Wash two times with 1x TBS-Tween buffer for 5 min on a rocker.
Wash two times with 1x TBS buffer for 10 min on a rocker.
Wash two times shortly in 1x phosphatase buffer.
Place the membrane in staining solution (10ml 1x phosphatase buffer + 66µl NBT + 33µl BCIP), stain in the dark until bands become visible.
Wash with H₂O to stop the reaction.
Dry the membrane in Whatman paper and scan it.

Microbial B₁₂ Plate Assay

The B₁₂ Plate Assay allows the detection of corrinoids in cell extracts or supernatants. It is based on the fact, that E. coli DSM 4261 relies on its B₁₂ dependent methionine synthase which is encoded by metH. This is caused by a point mutation in metE which encodes the B₁₂ independent methionine synthase. In a medium without methionine, E. coli DSM 4261 therefore relies on the presence of B₁₂.

Cultivation of E. coli DSM 4261

50 mL of Guttman medium are inoculated with a 5 mL preparatory overnight culture.
The cells are harvested at an OD₆₀₀ of 0.2, washed three times with 20 mL 0.9% NaCl and afterwards resuspended in the same volume NaCl.

Preparation of samples

After induction, the cells are centrifuged down, and washed three times with 0.1 M sodium chloride solution.:

Component	Amount
K₂HPO₄	13.6 g
KH₂PO₄ · 3 H₂O	22.8 g

Add components to ddH2O, adjust the pH tp 7.0 and bring the volume to 1 L.
Periplasm, cytoplasm and crude cell extracts from different expression studies are used as samples.

Assay

7 mL of the cell suspension, 50 mM and 0.2 g/L triphenyltetrazoliumchloride are added to 500 mL of the autoclaved mineral-agar (50°C).

Component	Amount
K₂HPO₄	7 g
KH₂PO₄	3 g
(NH₄)₂SO₄	1 g
MgSO₄ · 7 H₂O	0.1 g
Na₂citrate · 2 H₂O	3 g
Agar Bacteriological	15 g

Add components to ddH₂O and bring the volume to 1 L.
4 sterile filter papers (Ø 0.9 cm, Fa. Schleicher & Schuell, Dassel) are laid onto the plates and loaded with 10-15 µL of a sample or a Vitamin B₁₂ calibration solution (0, 0.05, 0.25, 0.1, 5.0 μg/ml). Every sample or concentration is analyzed twice.
The plates are incubated at 37°C for 16-24 h.

If the samples contained Vitamin B₁₂, the cells grow in a red zone around the filter paper. The size is proportional to the Vitamin ₁₂ concentration and the reduction of triphenyltetrazoliumchloride causes the red staining.

To analyze the B₁₂ concentration in the samples, the diameter of the red zone is measured and compared to the calibrations.

Photometric B₁₂ Assay

To determine the corrinoid concentration in a sample, the corrinoids have to be converted into the soluble dicyano form and proteins and lipids have to be removed by precipitation and centrigugation.

Incubate 1 mL of your sample with 0.2% (w/v) NaCN or KCN for 30 min at RT in the dark.
Acidify the solution with pure acetic acid to a pH of 4.0.
Boil the samples at 100°C for 20 min.
Let the sample cool down and adjust the pH to 11.0 with KOH.
Add 4-5 mg NaCN or KCN.
Centriguge at 13,000 rpm for 30 min at RT.
Measure a spectrum of the supernatant from 350 to 650 nm.

The concentration of Vitamin B₁₂ can be calculated with help of the molar extinction coefficient of dicyano cobalamine (Δε_580-640 = 7.3 mM^-1 · cm^-1) by determining the differences in the absorption at 580 and 650 nm.
Alternatively, the concentration of Vitamin B₁₂ can also be determined with the extinction coefficients of dicyano cobalamine at 580 nm (ε₅₄₀ = 7800 mM^-1 · cm^-1) and 367 nm (Δε₃₆₇ = 23800 mM^-1 · cm^-1) by calculating the average.
As a standard hydroxyl cobalamine and cyano cobalamine are used.

Bradford Assay

Bradford solution

Mix 800 mL ddH₂O with 200 mL RotiQuant (5X) (Carl Roth).
Store at 4°C protected from light.
After preparing a new solution, the Bradford factor has to be determined by measuring a standard curve from protein standards with known concentrations.

Measuring protein sample

Mix 20 µL of the sample with 1mL Bradford solution in a photometer cuvette. Prepare triplicates.
Also prepare a blank by mixing 20 µL ddH₂O with 1 mL Bradford solution in a photometer cuvette.
Incubate for 5 min at RT protected from light.
Measure the absorbance at 595 nm against the black. It should lie between 0.1 and 0.6, otherwise the protein sample has to be diluted.

Calculation of protein concentration

@@ Line 64: / Line 64: @@
 <h2>Overview of Experiments</h2>
-<img src="https://static.igem.org/mediawiki/2016/6/6f/T--Goettingen--Progress.png" style="width:100%;" />
-<h3>1. Production Strains</h3>
+<div class="exp" style="background-image: url(https://static.igem.org/mediawiki/2016/9/9d/T--Goettingen--Process.png); background-size: 100%; margin:0px, padding:0px;">
+<a href="https://2016.igem.org/Team:Goettingen/Experiments#exp1"><img class="img-noborder1" src="https://static.igem.org/mediawiki/2016/7/77/T--Goettingen--Process_trig1.png" style="width:20%;"/></a>
+<a href="https://2016.igem.org/Team:Goettingen/Experiments#exp2"><img class="img-noborder" src="https://static.igem.org/mediawiki/2016/6/67/T--Goettingen--Process_trig2.png" style="width:20%;"/></a>
+<a href="https://2016.igem.org/Team:Goettingen/Experiments#exp3"><img class="img-noborder" src="https://static.igem.org/mediawiki/2016/3/32/T--Goettingen--Process_trig3.png" style="width:20%;"/></a>
+<a href="https://2016.igem.org/Team:Goettingen/Experiments#exp4"><img class="img-noborder" src="https://static.igem.org/mediawiki/2016/e/e8/T--Goettingen--Process_trig4.png" style="width:20%;"/></a>
+<a href="https://2016.igem.org/Team:Goettingen/Experiments#exp5"><img class="img-noborder" src="https://static.igem.org/mediawiki/2016/3/30/T--Goettingen--Process_trig5.png" style="width:20%;"/></a>
+</div>
+</div> <!--close text div -->
+<div class="text" id="exp1">
+<h2>1. Production Strains</h2>
+Following strains were cultivated:
+<ul>
+<li> <i>Escherichia coli</i> DH5alpha: <a href="https://www.dsmz.de/catalogues/details/culture/DSM-6897.html?tx_dsmzresources_pi5%5BreturnPid%5D=304"> <b>DSMZ</b></a> </li>
+<li> <i>Raoultella planticola</i> DSM 3069 (ATCC 33531): <a href="https://www.dsmz.de/catalogues/details/culture/DSM-3069.html?tx_dsmzresources_pi5%5BreturnPid%5D=304"> <b>DSMZ</b></a>
+<li> <i>Shimwelia blattae</i> DSM 4481 (ATCC 29907) : <a href="https://www.dsmz.de/catalogues/details/culture/DSM-4481.html?tx_dsmzresources_pi5%5BreturnPid%5D=304"> <b>DSMZ</b></a>
+</ul>
 <p>In order to ensure that the bacteria we are working with are really the ones we want to work with, a 16S rDNA PCR was performed.</p>
@@ Line 74: / Line 112: @@
-<h3>2. BioBricks</h3>
+</div> <!--close text div -->
+<div class="text" id="exp2">
+<h2>2. BioBricks</h2>
 <p>Our BioBricks were designed using the software SnapGene. The original Genes for our B<sub>12</sub> binding proteins, and the <i>torA</i> signal sequence were codon optimized for <i>E. coli</i>.</p>
 <p>The DNA containing the Genes were synthesized and friendly provided by IDT Integrated DNA Technologies.</p>
-<p>In case of MutB, the length of the gene exceeded the maximum length of 2000 bp from IDT. For this reason, we designed two DNA parts, with a natural occurring <i>Hind</i>III restriction site at both ends. We intended to fuse these both genes by ligation. However, after having diffuculties to fuse the genes by ligation, we decided to fuse them by fusion PCR. In order to multiply the DNA for or cloning experiments, and to equip our genes with restriction sites, PCR was used.</p>
+<p>In case of <i>torA-mutB</i>, the length of the gene exceeded the maximum length of 2000 bp from IDT. For this reason, we designed two DNA parts, with a natural occurring <i>Hind</i>III restriction site at both ends. We intended to fuse these both genes by ligation. However, after having diffuculties to fuse the genes by ligation, we decided to fuse them by fusion PCR. In order to multiply the DNA for our cloning experiments, and to equip our genes with restriction sites, PCR was used.</p>
-<p>For our purpose, we were searching for a vector with (a) kanamycin resistance and (b) araBAD operon. We thus decided to use the pBAD202 expression system. This vector, however, is equipped with a thioredoxin fusion protein which increases the rate of expression, but prohibits the physiological function of our protein. For this reason, we designed primers for an autarkic synporter protein. In order to test the dependence of the expression system on the B<sub>12</sub> export rate, we also decided to use different other vectors.<p>
+<p>For our purpose, we were searching for a vector with (a) kanamycin resistance and (b) araBAD operon. We thus decided to use the pBAD202 expression system. This vector, however, is equipped with a thioredoxin fusion protein which increases the rate of expression, but prohibits the physiological function of our protein. For this reason, we designed primers for an autarkic Synporter protein. In order to test the dependence of the expression system on the B<sub>12</sub> export rate, we also decided to use different other vectors.<p>
-<p>For vectors ligation, we used a standart ligase reaction, for the pBAD202 expression, which works without ligation but topoisomerase reaction, we followed the manufacturer's protocol.</p>
+<p>For vector ligation, we used a standart ligase reaction, for the pBAD202 expression, which works without ligation but topoisomerase reaction, we followed the manufacturer's protocol.</p>
+<hr>
+<div class="row">
+<div class="col-md-6">
+<img src="https://static.igem.org/mediawiki/2016/f/f9/T--Goettingen--BtuF_pBAD202.png" class="photo" style="width:100%;" />
+</div>
+<div class="col-md-6">
+<img src="https://static.igem.org/mediawiki/2016/1/12/T--Goettingen--GlmS_pBAD202.png" class="photo" style="width:100%;" />
+</div>
+</div> <!-- close row div -->
+<div class="caption">
+<p><b>Fig. 1:</b>Our Synporter genes  <i>torA-btuF</i> and <i>torA-glmS</i> cloned into the pBAD202 plasmid, separated from the thioredoxin fusion protein.</p>
+</div>
+<hr>
+</div> <!--close text div -->
-<h3>3. Transformation and Cultivation</h3>
+<div class="text" id="exp3">
+<h2>3. Transformation and Cultivation</h2>
 <p>For our transformation experiments, we used electroporation for all our self prepared competent cells. For the heat competent <i>E. coli</i> Top10 cells provided with the pBAD202 expression system, we used the manufacturer's heat shock transformation protocol.</p>
@@ Line 87: / Line 160: @@
 <p>For vector multiplication,  <i>E. coli</i> cells (Top10 for pBAD202 plasmids, DH5alpha for all other plasmids) were transformed with the constructed plasmids. After the transformation, the cells were cultivated on LB Medium. Transformants were selected, and the respective clones were picked, cultivated in LB medium, and plasmids were extracted.</p>
-<p>The Plasmids were then introduced into the production strains: <i>Raoultella planticola</i> ATCC 33531, <i>Shimwellia blattae</i> ATCC 29907, and <i>Salmonella typhimurium</i> TA100.</p>
+<p>The Plasmids were then introduced into the production strains <i>Raoultella planticola</i> ATCC 33531 and <i>Shimwellia blattae</i> ATCC 29907.</p>
-<p>For the expression experiments, the all cells were cultivated and the expression induced in RM medium under aerobic conditions. As <i>S. blattae</i> is known to produce Vitamin B<sub>12</sub> only under anaerobic conditions, the expression was induced under anerobic conditions in RM medium. </p>
+<p>For the expression experiments, the all cells were cultivated and the expression induced in RM medium under aerobic conditions. As <i>S. blattae</i> and <i>R. planticola</i> are known to produce Vitamin B<sub>12</sub> only under anaerobic conditions, the expression was induced under anerobic conditions in MM medium. </p>
 <p>The induction was performed using different concentrations of <span style="font-variant: small-caps;">l</span>-arabinose and different induction time spans.</p>
@@ Line 95: / Line 168: @@
-<h3>4. Expression Test</h3>
-<p>To test for the expression of our synporter protein, the cell lysates of the expression cultures we submitted to an SDS-PAGE. From the SDS Gels, Western Blots were performed using anti-Poly-Histidine-tag antibodies.</p>
+</div> <!--close text div -->
-<h3>5. Vitamin B<sub>12</sub> Assay</h3>
-<p>To test the physiological function of our synporter protein, different assays for B<sub>12</sub> detection were performed. For the assays, (a) the whole cell filtered medium, and (b) the periplasm fraction of the cells were examined.</p>
-<p>The periplasm fraction of the producing cells was gained by ultrazentrifugation.</p>
+<div class="text" id="exp4">
-<h6>5.1. Microbial Assay</h6>
+<h2>4. Expression Test</h2>
-<p>The microbial B<sub>12</sub> assay relies on the growth diameter of the <i>E. coli</i> ATCC 10799 strain on an agar plate, in dependence of the Vitamin B<sub>12</sub> (or methionine) concentration in the medium.</p>
+<p>To test for the expression of our Synporter protein, the cell lysates of the expression cultures we submitted to an SDS-PAGE. From the SDS Gels, Western Blots were performed using anti-Poly-Histidine-tag antibodies.</p>
+<p>In order to test the translocation of our Synporter proteins, the cells were fractionated into Periplasm, Spheroplasts, and Cytoplsma (gained by French Press cell disruption) as a control.
-<p>For this purpose, agar plates with synthetic Guttman medium (free of B<sub>12</sub> and amino acids, 1.5% agarose) were prepared.
-The <i>E coli</i> detection cells were grown in liquid synthetic Guttman medium supplemented with selected amino acids (no methionine) and Vitmamin B<sub>12</sub>. Afterwards, the cells were washed with PBS buffer three times, in order to make the cells virtually free of Vitamin B<sub>12</sub>. The cells were resuspended in PBS buffer, and mixed with warm, liquid Guttman medium (free of B<sub>12</sub> and amino acids, 0.8% agarose), and then poured on the prepared agar plates. For the assay, small paper platelets (usually used for antibiotic tests) were placed on the top agar layer, and soaked with differently concentrated calibration solutions of Vitamin B<sub>12</sub>. The plates were incubated overnight, and the diameters measured after 16 h. From the different diameters, dependent of the Vitamin B<sub>12</sub> concentration, a calibration curve was calculated.</p>
-<p>In order to determine the B<sub>12</sub> content of our medium and periplasm fraction, the assay plates were prepared exactly as described above, and paper platelets were soaked with the respective solution. Comparing to the calibration curve, the diameter indicates the B<sub>12</sub> amount.</p>
+</div> <!--close text div -->
-<h6>5.1. Photometric Assay</h6>
+<div class="text" id="exp5">
+<h2>5. Vitamin B<sub>12</sub> Assays</h2>
+<p>To test the physiological function of our Synporter protein, different assays for B<sub>12</sub> detection were performed. For the assays, the periplasm and cytoplasm fractions of the cells were examined.</p>
+<p>The periplasm fraction of the producing cells was gained by centrifugation.</p>
+<h3>5.1. Microbial Assay</h3>
+<p>The microbial B<sub>12</sub> assay relies on the growth diameter of the <i>E. coli</i> DSM4261 strain on an agar plate, in dependence of the Vitamin B<sub>12</sub> (or methionine) concentration in the medium.</p>
+<p>For this purpose, agar plates with synthetic Guttman medium (free of B<sub>12</sub> and amino acids, 1.5% agar-agar) were prepared.
+The <i>E. coli</i> detection cells were grown in liquid synthetic Guttman medium supplemented with selected amino acids (no methionine) and Vitmamin B<sub>12</sub>. Afterwards, the cells were washed with PBS buffer three times, in order to make the cells virtually free of Vitamin B<sub>12</sub>. The cells were resuspended in PBS buffer, and mixed with warm, liquid Guttman medium (free of B<sub>12</sub> and amino acids, 0.8% agar-agar), and then poured on the prepared agar plates. For the assay, small paper platelets (usually used for antibiotic tests) were placed on the top agar layer, and soaked with differently concentrated calibration solutions of Vitamin B<sub>12</sub>. The plates were incubated overnight, and the diameters measured after 16 h. From the different diameters, dependent of the Vitamin B<sub>12</sub> concentration, a calibration curve was calculated.</p>
+<p>In order to determine the B<sub>12</sub> content of our periplasm and cytoplasm fractions, the assay plates were prepared exactly as described above, and paper platelets were soaked with the respective solution. Comparing to the calibration curve, the diameter indicates the B<sub>12</sub> amount.</p>
+<h3>5.1. Photometric Assay</h3>
+<p>In order to determine the Vitamin&nbsp;B<sub>12</sub> concentration of a sample photometrically, the corrinoids in our samples needed to be converted into dicyano cobalamine. This was achieved by treating the samples with sodium cyanide or potassium cyanide. Other components like proteins and lipids which would distort the measurements, can easily be separated by precipitation through acidic and basic conditions as well as heating and subsequent centrifugation.</p>
+<p>After measuring a spectrum of the supernatant from 350 to 650&nbsp;nm, the Vitamin B<sub>12</sub> concentration could be calculated with help of the extinction coefficients of dicyano cobalamine.</p>
@@ Line 184: / Line 270: @@
                                                  				<div id="1-1" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Tryptone</td><td>10 g</td></tr>
+            <tr><td>NaCl</td><td>10 g</td></tr>
+            <tr><td>Yeast extract</td><td>5 g</td></tr>
+            <tr><td colspan="3">optional:</td></tr>
+            <tr><td>Agar-agar</td><td>15 g</td></tr>
+</table></div><br/>
+<ul>
+<li>Add components to ddH<sub>2</sub>O and adjust volume to 1 L.</li>
+<li>Autoclave for 20 min at 121&deg;C.</li>
+</ul>
                                                  				</div>
@@ Line 210: / Line 310: @@
                                                  				<div id="1-2" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Na<sub>2</sub>HPO<sub>4</sub></td><td>10 g</td></tr>
+            <tr><td>KH<sub>2</sub>PO<sub>4</sub></td><td>10 g</td></tr>
+            <tr><td>NH<sub>4</sub>Cl</td><td>5 g</td></tr>
+            <tr><td>NaCl</td><td>15 g</td></tr>
+</table></div><br/>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 7.0 and bring the volume to 987 mL.</li>
+<li>Autoclave for 20 min at 121&deg;C.</li>
+<li>Add the following</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Stock solution</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Glucose</td><td>20%</td><td>10 mL</td></tr>
+            <tr><td>MgSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>1 M</td><td>1 mL</td></tr>
+            <tr><td>Thiamine &middot; HCl</td><td>30 mM</td><td>1 mL</td></tr>
+            <tr><td>CaCl<sub>2</sub></td><td>0.13 M</td><td>1 mL</td></tr>
+</table></div>
                                                  				</div>
@@ Line 238: / Line 365: @@
                                                  				<div id="1-3" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>The dehydrated medium is distributed by Laboratories Conda (Cat. 1542) and was prepared according to protocol.</p>
                                                  				</div>
@@ Line 247: / Line 374: @@
                                          		</div>
                                      </div>
 <!-- ************** ENTRY 1.4 ******************* -->
@@ Line 258: / Line 382: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Guttman Medium (B<sub>12</sub> Assay)
+                                             			MM medium
                                              		</h5>
                                          		</div></a>
@@ Line 267: / Line 391: @@
                                                  				<div id="1-4" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p><u>Mineral medium with additon of yeast extract</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>K<sub>2</sub>HPO<sub>4</sub></td><td>14 g</td></tr>
+            <tr><td>KH<sub>2</sub>PO<sub>4</sub></td><td>6 g</td></tr>
+            <tr><td>(NH<sub>4</sub>)<sub>2</sub>SO<sub>4</sub></td><td>3 g</td></tr>
+            <tr><td>MgSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>0.2 g</td></tr>
+            <tr><td>Yeast extract</td><td>0.2 g</td></tr>
+            <tr><td>CoCl<sub>2</sub> (50 mM)</td><td>85 &micro;L</td></tr>
+            <tr><td>SL-4</td><td>1 mL</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 7.5 and bring the volume to 1 L.</li>
+<li>100 mM glycerine are added seperatly to the medium.</li>
+</ul>
+<p><u>SL-4: Trace element solution (Pfenning and Lippert, 1966)</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>EDTA-Na<sub>2</sub></td><td>5 g</td></tr>
+            <tr><td>FeSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>2 g</td></tr>
+            <tr><td>ZnSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>0.1 g</td></tr>
+            <tr><td>MnCl<sub>2</sub> &middot; 4 H<sub>2</sub>O</td><td>0.03 g</td></tr>
+            <tr><td>H<sub>3</sub>BO<sub>4</sub></td><td>0.3 g</td></tr>
+            <tr><td>CoCl<sub>2</sub> &middot; 6 H<sub>2</sub>O</td><td>0.2 g</td></tr>
+            <tr><td>CuCl<sub>2</sub> &middot; 2 H<sub>2</sub>O</td><td>0.01 g</td></tr>
+            <tr><td>NiCl<sub>2</sub> &middot; 6 H<sub>2</sub>O</td><td>0.02 g</td></tr>
+            <tr><td>NaMoO<sub>4</sub> &middot; 2 H<sub>2</sub>O</td><td>0.03 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 6.7 and bring the volume to 1 L.</li>
+<li>The solution is stored at 4&deg;C and protected from light.</li>
+</ul>
                                                  				</div>
@@ Line 276: / Line 443: @@
                                          		</div>
                                      </div>
@@ Line 285: / Line 453: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			<i>S. blattae</i> Medium Anaerobic
+                                             			Guttman Medium (B<sub>12</sub> Assay)
                                              		</h5>
                                          		</div></a>
@@ Line 294: / Line 462: @@
                                                  				<div id="1-5" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>K<sub>2</sub>HPO<sub>4</sub></td><td>14 g</td></tr>
+            <tr><td>KH<sub>2</sub>PO<sub>4</sub></td><td>6 g</td></tr>
+            <tr><td>(NH<sub>4</sub>)<sub>2</sub>SO<sub>4</sub></td><td>2 g</td></tr>
+            <tr><td>MgSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>0.2 g</td></tr>
+            <tr><td>Na<sub>2</sub>citrate &middot; 2 H<sub>2</sub>O</td><td>1 g</td></tr>
+            <tr><td>L-Asparagine</td><td>0.8 g</td></tr>
+            <tr><td>L-Arginine</td><td>0.2 g</td></tr>
+            <tr><td>L-Glutamic acid</td><td>0.2 g</td></tr>
+            <tr><td>Glycine</td><td>0.2 g</td></tr>
+            <tr><td>L-Tryptophan</td><td>0.2 g</td></tr>
+            <tr><td>L-Prolin</td><td>0.2 g</td></tr>
+            <tr><td>L-Histidine</td><td>0.2 g</td></tr>
+            <tr><td>Vitamin B<sub>12</sub></td><td>40 &micro;g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 6.8-7.2 and bring the volume to 1 L.</li>
+<li>50 mM glucose have to be added seperatly before the inoculation.</li>
+</ul>
                                                  				</div>
@@ Line 305: / Line 494: @@
                                          		</div>
                                      </div>
@@ Line 348: / Line 540: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Cultivation of <i>Escherichia coli</i>, <i>Shimwellia blattae</i> and <i>Salmonella typhimurium</i> TA 100
+                                             			Cultivation of <i>Escherichia coli</i>
                                              		</h5>
                                          		</div></a>
@@ Line 357: / Line 549: @@
                                                  				<div id="2-1" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>For preperation of competent cells and cloning, the <em>E.&nbsp;coli</em> strains DH5&alpha; and TOP10 are grown in LB medium at 37&deg;C.</p>
+<p>For expression studies of constructs in pBAD202, <em>E.&nbsp;coli </em>TOP cells are grown in LB medium supplemented with 1&nbsp;mg/mL Vitamin B<sub>12</sub> and 50&nbsp;&micro;g/mL kanamycin.</p>
                                                  				</div>
@@ Line 383: / Line 576: @@
                                                  				<div id="2-2" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>For preperation of competent cells and cloning, <em>R.&nbsp;platicola</em> is grown in LB medium at its temperature optimum of 30&deg;C.</p>
+<p>For expression studies of constructs in pBAD202, <em>R. planticola</em> is grown under anaerobic conditions in MM medium supplemented with 50&nbsp;&micro;g/mL kanamycin.</p>
                                                  				</div>
@@ Line 400: / Line 594: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Preparation of Electrocompetent Cells
+                                             			Cultivation of <em>Shimwellia blattae</em>
                                              		</h5>
                                          		</div></a>
@@ Line 408: / Line 602: @@
                                                  			<div class="tab-content">
                                                  				<div id="2-3" class="tab-pane fade in active">
+<p>For preperation of competent cells and cloning, the <em>S.&nbsp;blattae</em> is grown in LB medium at 37&deg;C.</p>
+<p>For expression studies of constructs in pBAD202, <em>S.&nbsp;blattae</em> was grown under anaerobic conditions in MM medium supplemented with 50&nbsp;&micro;g/mL kanamycin.</p>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 2.4 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#2-4">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Preparation of Electrocompetent Cells
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="2-4" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="2-4" class="tab-pane fade in active">
     <p class="protocols_text"><strong>Material to prepare</strong></p>
@@ Line 413: / Line 635: @@
          <li>2x 5 mL LB</li>
          <li>250 mL LB in 1 L Erlenmeyer flask with chicane</li>
-         <li>500 mL sterile Millipore-H<sub>2</sub>O at 4 &deg;C</li>
+         <li>500 mL sterile Millipore-H<sub>2</sub>O at 4&deg;C</li>
-         <li>50 mL sterile glycerol (10&nbsp;% (w/v)) at 4 &deg;C</li>
+         <li>50 mL sterile glycerol (10% (w/v)) at 4&deg;C</li>
-         <li>30 sterile labeled Eppendorf cups at &ndash; 20&deg;C or -80 &deg;C</li>
+         <li>30 sterile labeled Eppendorf cups at &ndash; 20&deg;C or -80&deg;C</li>
-         <li>1x sterile GS3 jar at 4 &deg;C</li>
+         <li>1x sterile GS3 jar at 4&deg;C</li>
-         <li>1x Aquatron at 30 &deg;C</li>
+         <li>1x Aquatron at 30&deg;C</li>
-         <li>1x Sorvall RC6 centrifuge at 4 &deg;C</li>
+         <li>1x Sorvall RC6 centrifuge at 4&deg;C</li>
-         <li>1x Universal 320R centrifuge at 4 &deg;C</li>
+         <li>1x Universal 320R centrifuge at 4&deg;C</li>
          <li>1 L liquid nitrogen</li>
      </ul>
@@ Line 427: / Line 649: @@
      <ul class="protocols_list">
          <li class="protocols_list">Inoculate 2x 5 mL LB (if required with antibiotics) with your strain of interest, either from cryo culture or from agar plate.</li>
-         <li class="protocols_list">Incubate overnight at 37 &deg;C and 150 rpm.</li>
+         <li class="protocols_list">Incubate overnight at 37&deg;C and 150 rpm.</li>
      </ul>
      <p>&nbsp;</p>
@@ Line 433: / Line 655: @@
      <ul class="protocols_text">
-         <li class="protocols_list">Inoculate 250 mL LB (without antibiotics) with 2 % (5 mL) preculture.</li>
+         <li class="protocols_list">Inoculate 250 mL LB (without antibiotics) with 2% (5 mL) preculture.</li>
-         <li class="protocols_list">Incubate in the Aquatron at 30 &deg;C and 160 rpm until OD<sub>600</sub> of 0.5-0.8.</li>
+         <li class="protocols_list">Incubate in the Aquatron at 30&deg;C and 160 rpm until OD<sub>600</sub> of 0.5-0.8.</li>
          <li class="protocols_list">Check the culture via microscope for contaminations.</li>
      </ul>
@@ Line 440: / Line 662: @@
      <ul class="protocols_text">
          <li class="protocols_list">Let the cells (OD<sub>600</sub> of 0.5-0.8) cool down in ice water for 10-20 min. All further steps are performed under cool conditions.</li>
-         <li class="protocols_list">Decant the cells in sterile GS3 jar and centrifuge at 4 &deg;C and 5000 rpm (4230 g) for 5-10 min.</li>
+         <li class="protocols_list">Decant the cells in sterile GS3 jar and centrifuge at 4&deg;C and 5000 rpm (4230 g) for 5-10 min.</li>
-         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4 &deg;C ddH<sub>2</sub>O.</li>
+         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4&deg;C ddH<sub>2</sub>O.</li>
-         <li class="protocols_list">Centrifuge the GS3 jar at 4 &deg;C and 5000 rpm (4230 g)for 5-10 min.</li>
+         <li class="protocols_list">Centrifuge the GS3 jar at 4&deg;C and 5000 rpm (4230 g)for 5-10 min.</li>
-         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4 &deg;C ddH<sub>2</sub>O.</li>
+         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4&deg;C ddH<sub>2</sub>O.</li>
-         <li class="protocols_list">Centrifuge the GS3 jar at 4 &deg;C and 5000 rpm (4230 g)for 5-10 min.</li>
+         <li class="protocols_list">Centrifuge the GS3 jar at 4&deg;C and 5000 rpm (4230 g)for 5-10 min.</li>
-         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4 &deg;C glycerol (10&nbsp;% (w/v)). Afterwards, transfer the culture into a 50 mL Falcon tube.</li>
+         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4&deg;C glycerol (10% (w/v)). Afterwards, transfer the culture into a 50 mL Falcon tube.</li>
-         <li class="protocols_list">Centrifuge the Falcon tube at 4 &deg;C and 6200 rpm (4230 g) for 5-10 min.</li>
+         <li class="protocols_list">Centrifuge the Falcon tube at 4&deg;C and 6200 rpm (4230 g) for 5-10 min.</li>
-         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4 &deg;C glycerol (10&nbsp;% (w/v)).</li>
+         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4&deg;C glycerol (10% (w/v)).</li>
-         <li class="protocols_list">Centrifuge the Falcon tube at 4 &deg;C and 6200 rpm (4230 g) for 5-10 min.</li>
+         <li class="protocols_list">Centrifuge the Falcon tube at 4&deg;C and 6200 rpm (4230 g) for 5-10 min.</li>
-         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 500 &micro;L sterile 4 &deg;C glycerol (10&nbsp;% (w/v)).</li>
+         <li class="protocols_list">Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 500 &micro;L sterile 4&deg;C glycerol (10% (w/v)).</li>
          <li class="protocols_list">Aliquot the cells into the Eppendorf cups (40 &micro;L per Eppendorf cup). While aliquoting, filled Eppendorf cups must be frozen directly in liquid nitrogen.</li>
-         <li class="protocols_list">Store the filled Eppendorf cups in a cryobox at -80 &deg;C.</li>
+         <li class="protocols_list">Store the filled Eppendorf cups in a cryobox at -80&deg;C.</li>
      </ul>
@@ Line 463: / Line 685: @@
-<!-- ************** ENTRY 2.4 ******************* -->
+<!-- ************** ENTRY 2.5 ******************* -->
                              <div class="panel panel-default">
-                             <a data-toggle="collapse" data-parent="#accordion" href="#2-4">
+                             <a data-toggle="collapse" data-parent="#accordion" href="#2-5">
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Transformation Electroporation of Electrocompetent Cells
+                                             			Transformation of Electrocompetent Cells by Electroporation
                                              		</h5>
                                          		</div></a>
-                                        		<div id="2-4" class="panel-collapse collapse">
+                                        		<div id="2-5" class="panel-collapse collapse">
                                              		<div class="panel-body">
                                                  			<div class="tab-content">
-                                                 				<div id="2-4" class="tab-pane fade in active">
+                                                 				<div id="2-5" class="tab-pane fade in active">
 	<ul class="protocols_list">
@@ Line 486: / Line 708: @@
          <li class="protocols_list">Electroporation: 2500 V for 2 mm cuvettes (1250 V for 1 mm cuvettes), 25 &micro;F, 200 &Omega;, discharging time should be 3-5 msec. Contacts of the electroporation cuvette must be dry. Remove all air bubbles before electroporation.</li>
          <li class="protocols_list">Immediately add 960 &micro;L liquid LB (or, if available, SOC medium for a higher transformation efficiency) into the cuvette and transfer the content into a 2 ml Eppendorf cup.</li>
-         <li class="protocols_list">Incubate at 37 &deg;C and 150 rpm for 1 h. Fix tube in horizontal position with tape.</li>
+         <li class="protocols_list">Incubate at 37&deg;C and 150 rpm for 1 h. Fix tube in horizontal position with tape.</li>
          <li class="protocols_list">Plate 100 &micro;L of 10<sup>-3</sup> to 10<sup>-6</sup> dilutions on plates with selection pressure</li>
-         <li class="protocols_list">Incubate at 37 &deg;C overnight.</li>
+         <li class="protocols_list">Incubate at 37&deg;C overnight.</li>
      </ul>
@@ Line 501: / Line 723: @@
                                      </div>
-                                     <!-- ************** ENTRY 2.5 ******************* -->
+                                     <!-- ************** ENTRY 2.6 ******************* -->
                                                                  <div class="panel panel-default">
-                                                                 <a data-toggle="collapse" data-parent="#accordion" href="#2-5">
+                                                                 <a data-toggle="collapse" data-parent="#accordion" href="#2-6">
                                                                              		<div class="panel-heading">
                                                                                  		<h5 class="panel-title">
-                                                                                 			Heat Shock Transformation of Heat Competent Cells
+                                                                                 			Transformation of Chemically Competent Cells by Heat-Shock
                                                                                  		</h5>
                                                                              		</div></a>
-                                                                            		<div id="2-5" class="panel-collapse collapse">
+                                                                            		<div id="2-6" class="panel-collapse collapse">
                                                                                  		<div class="panel-body">
                                                                                      			<div class="tab-content">
-                                                                                     				<div id="2-5" class="tab-pane fade in active">
+                                                                                     				<div id="2-6" class="tab-pane fade in active">
-                                    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>One Shot<sup>&reg;</sup>TOP10 Competent cells (ThermoFisher) were transformed following the respective protocol for chemical transformation:</p>
+<ul>
+<li>Add 3&nbsp;&micro;L of the TOPO<sup>&reg;</sup>Cloning Reaction into a vial of competent <em>E.&nbsp;coli</em> cells and mix gently by inverting.</li>
+<li>Incubate on ice for 5-30&nbsp;min.</li>
+<li>Heat-shock the cells for 30&nbsp;s at 42&deg;C without shaking.</li>
+<li>Immediately transfer the tubes on ice.</li>
+<li>Add 250&nbsp;&micro;L of S.O.C. medium (RT), cap the tube tightly and shake it horizontally (200&nbsp;rpm) at 37&deg;C for 1&nbsp;h.</li>
+<li>Spread 100-200&nbsp;&micro;L of different volumes or dilutions from each transformation on a prewarmed selective plate and incubate overnight at 37&deg;C.</li>
+<li>Pick colonies for analysis.</li>
+</ul>
@@ Line 528: / Line 759: @@
                                                                              		</div>
                                                                          </div>
+<!-- ************** ENTRY 2.7 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#2-7">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Plasmid preparation
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="2-7" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="2-7" class="tab-pane fade in active">
+<p><p>Small scale preparation of plasmid DNA was performed using the NucleoSpin<sup>&reg;</sup> Plasmid kit distributed by Macherey-Nagel (REF 740588) according to protocol.</p></p>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
@@ Line 553: / Line 810: @@
              		<div class="panel-heading">
                  		<h4 class="panel-title">
-                 			PCR and Cloning
+                 			PCR methods
                  		</h4>
              		</div></a>
@@ Line 570: / Line 827: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Entry 1
+                                             			PCR with Phusion DNA Polymerase
                                              		</h5>
                                          		</div></a>
@@ Line 579: / Line 836: @@
                                                  				<div id="3-1" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>Phusion<sup>&reg;</sup> High-Fidelity DNA Polymerase is used for all standard PCR amplifications.</p>
+<p><u>Pipetting scheme</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">20 µL reaction</th>
+<th style="font-size:80%;">50 µL reaction</th>
+<th style="font-size:80%;">Final concentration</th>
+            <tr><td>Nuclease-free water</td><td>to 20 &micro;L</td><td>to 50 &micro;L </td><td> </td></tr>
+            <tr><td>5X Phusion HF buffer</td><td>4 &micro;L</td><td>10 &micro;L</td><td>1X</td></tr>
+            <tr><td>10 mM dNTPs</td><td>0.4 &micro;L</td><td>1 &micro;L</td><td>200 &micro;M</td></tr>
+            <tr><td>10 &micro;M forward primer</td><td>1 &micro;L</td><td>2.5 &micro;L</td><td>0.5 &micro;M</td></tr>
+            <tr><td>10 &micro;M reverse primer</td><td>1 &micro;L</td><td>2.5 &micro;L</td><td>0.5 &micro;M</td></tr>
+            <tr><td>Template DNA</td><td>variable</td><td>variable</td><td>1 pg - 10 ng</td></tr>
+            <tr><td>DMSO (optional)</td><td>(0.6 &micro;L)</td><td>(1.5 &micro;L)</td><td>3%</td></tr>
+            <tr><td>Phusion DNA Polymerase</td><td>0.2 &micro;L</td><td>0.5 &micro;L</td><td>0.02 U/&micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Mix all components, adding the DNA polymerase last and spin down.</li>
+</ul>
+<p><u>Cycling</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Step</th>
+<th style="font-size:80%;">Temperature</th>
+<th style="font-size:80%;">Time</th>
+<th style="font-size:80%;">Cycles</th>
+            <tr><td>Initial Denaturation</td><td>98&deg;C</td><td>30 s</td><td>1</td></tr>
+            <tr><td>Denaturation</td><td>98&deg;C</td><td>10 s</td><td rowspan="3">25-35</td></tr>
+            <tr><td>Annealing</td><td>X&deg;C</td><td>30 s</td></tr>
+            <tr><td>Extension</td><td>72&deg;C</td><td>15-30 s/kb</td></tr>
+            <tr><td>Final Extension</td><td>72&deg;C</td><td>10 min</td><td>1</td></tr>
+            <tr><td> </td><td>4&deg;C</td><td>hold</td><td> </td></tr>
+</table></div></br>
+<ul>
+<li>To optimize the annealing temperature for each primer pair, a temperature gradient can be run.</li>
+</ul>
                                                  				</div>
@@ Line 596: / Line 904: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			ENtry 2
+                                             			Fusion PCR
                                              		</h5>
                                          		</div></a>
@@ Line 605: / Line 913: @@
                                                  				<div id="3-2" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>Fusion PCR was performed according to Harrison <em>et al.</em></p>
+<p><u>Pipetting scheme</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">50 µL reaction</th>
+<th style="font-size:80%;">Final concentration</th>
+            <tr><td>Nuclease-free water</td><td>to 50 &micro;L </td><td> </td></tr>
+            <tr><td>5X Phusion HF buffer</td><td>10 &micro;L</td><td>1X</td></tr>
+            <tr><td>10 mM dNTPs</td><td>1 &micro;L</td><td>200 &micro;M</td></tr>
+            <tr><td>50 mM MgCl<sub>2</sub></td><td>1.25 &micro;L</td><td>1.25 mM</td></tr>
+            <tr><td>10 &micro;M forward primer</td><td>1 &micro;L</td><td>0.2 &micro;M</td></tr>
+            <tr><td>10 &micro;M reverse primer</td><td>1 &micro;L</td><td>0.2 &micro;M</td></tr>
+            <tr><td>Template DNA</td><td>variable</td><td> </td></tr>
+            <tr><td>DMSO</td><td>1.5 &micro;L</td><td>3%</td></tr>
+            <tr><td>Phusion DNA Polymerase</td><td>0.5 &micro;L</td><td>0.02 U/&micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Mix all components, adding the DNA polymerase last and spin down.</li>
+</ul>
+<p><u>Cycling</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Step</th>
+<th style="font-size:80%;">Temperature</th>
+<th style="font-size:80%;">Time</th>
+<th style="font-size:80%;">Cycles</th>
+            <tr><td>Initial Denaturation</td><td>98&deg;C</td><td>1 min</td><td>1</td></tr>
+            <tr><td>Denaturation</td><td>98&deg;C</td><td>10 s</td><td rowspan="3">4</td></tr>
+            <tr><td>Annealing</td><td>68 &plusmn; 4&deg;C</td><td>30 s</td></tr>
+            <tr><td>Extension</td><td>72&deg;C</td><td>40 s</td></tr>
+            <tr><td>Denaturation</td><td>98&deg;C</td><td>10 s</td><td rowspan="3">27</td></tr>
+            <tr><td>Annealing</td><td>68 &plusmn; 4&deg;C</td><td>30 s</td></tr>
+            <tr><td>Extension</td><td>72&deg;C</td><td>50 s</td></tr>
+            <tr><td>Final Extension</td><td>72&deg;C</td><td>10 min</td><td>1</td></tr>
+            <tr><td> </td><td>4&deg;C</td><td>hold</td><td> </td></tr>
+</table></div></br>
+<ul>
+<li>To optimize the annealing temperature for each primer pair, a temperature gradient can be run.</li>
+</ul>
                                                  				</div>
@@ Line 622: / Line 981: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Entry 3
+S rDNA Colony PCR
                                              		</h5>
                                          		</div></a>
@@ Line 631: / Line 990: @@
                                                  				<div id="3-3" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>16S rDNA PCR was performed to check the identity of the bacterial strains we were working with. For this, colonies were picked and resuspended in 50 &micro;L ddH<sub>2</sub>O.</p>
-                                                				</div>
+<p><u>Pipetting scheme</u></p>
-                                                			</div>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
-                                            		</div>
+<tr style="font-weight:bold;">
-                                        		</div>
+<th style="font-size:80%;">Component</th>
-                                    </div>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Nuclease-free water</td><td>to 50 &micro;L </td></tr>
+            <tr><td>Optibuffer</td><td>5 &micro;L</td></tr>
+            <tr><td>10 mM dNTPs</td><td>5 &micro;L</td></tr>
+            <tr><td>5 mM forward primer (16S08)</td><td>4 &micro;L</td></tr>
+            <tr><td>5 mM reverse primer (150UR)</td><td>4 &micro;L</td></tr>
+            <tr><td>Template DNA</td><td>1 µL (suspension)</td></tr>
+            <tr><td>MgCl<sub>2</sub></td><td>3 &micro;L</td></tr>
+            <tr><td>BIO-X-ACT DNA Polymerase</td><td>0.5 &micro;L</td></tr>
+</table></div></br>
-<!-- ************** ENTRY 3.4 ******************* -->
+<ul>
+<li>Mix all components, adding the DNA polymerase last and spin down.</li>
+</ul>
-                            <div class="panel panel-default">
-                            <a data-toggle="collapse" data-parent="#accordion" href="#3-4">
-                                        		<div class="panel-heading">
-                                            		<h5 class="panel-title">
-                                            			Entry 4
-                                            		</h5>
-                                        		</div></a>
-                                       		<div id="3-4" class="panel-collapse collapse">
-                                            		<div class="panel-body">
-                                                			<div class="tab-content">
-                                                				<div id="3-4" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
@@ Line 669: / Line 1,027: @@
                                          		</div>
                                      </div>
@@ Line 684: / Line 1,044: @@
 <!-- ************** PANEL 3 END *******************-->
@@ Line 695: / Line 1,052: @@
              		<div class="panel-heading">
                  		<h4 class="panel-title">
-                 			Analytic Tests
+                 			Plasmid Construction
                  		</h4>
              		</div></a>
@@ Line 712: / Line 1,069: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Agarose Gel Electrophoresis
+                                             			Digestion of DNA with Restriction Enzymes
                                              		</h5>
                                          		</div></a>
@@ Line 721: / Line 1,078: @@
                                                  				<div id="4-1" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>Plasmid DNA and PCR products were digested according to FastDigest protocol (Thermo Scientific).</p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Plasmid DNA</th>
+<th style="font-size:80%;">PCR product</th>
+            <tr><td>Water, nuclease free</td><td>15 &micro;L</td><td>17 &micro;L</td></tr>
+            <tr><td>10X FastDigest or 10X FastDigest Green buffer</td><td>2 &micro;L</td><td>2 &micro;L</td></tr>
+            <tr><td>DNA</td><td>2 &micro;L <br/>(up to 1 &micro;g)</td><td>10 &micro;L <br/>(~0.2 &micro;g)</td></tr>
+            <tr><td>FastDigest enzyme</td><td>1 &micro;L</td><td>1 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Mix gently and spin down.</li>
+<li>Incubate at 37&deg;C in a heat block or water thermostat for X&nbsp;min.</li>
+<li>Inactivate the enzyme by heating for X&nbsp;min at X&deg;C.</li>
+</ul>
+<p>Comment: Incubation time and inactivation time and temperature depend on the applied FastDigest enzyme and were done according to the respective protocol.</p>
+<ul>
+<li>If the FastDigest Green Buffer was used in the reaction, an aliquot of the reaction mixture can be loaded directly on an agarose gel.</li>
+</ul>
                                                  				</div>
@@ Line 738: / Line 1,118: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			SDS Polyacrylamid Gel Electrophoresis
+                                             			Phosphorylation of DNA
                                              		</h5>
                                          		</div></a>
@@ Line 747: / Line 1,127: @@
                                                  				<div id="4-2" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>MutB2 DNA was phosphorylated with T4 Polynucleotide Kinase (T4 PNK) according to protocol (NEB, #M0201).</p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>DNA</td><td>up to 300 pmol of 5' termini</td></tr>
+            <tr><td>T4 PNK Reaction Buffer (10X)</td><td>5 &micro;L</td></tr>
+            <tr><td>ATP (10 mM)</td><td>5 &micro;L</td></tr>
+            <tr><td>T4 PNK</td><td>1 &micro;L (10 units)</td></tr>
+            <tr><td>Nuclease-free water</td><td>up to 50 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Prepare reaction mixture on ice.</li>
+<li>Incubate at 37&deg;C for 30 min.</li>
+<li>Heat inactivate at 65&deg;C for 20 min.</li>
+</ul>
                                                  				</div>
@@ Line 764: / Line 1,163: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Western Blot
+                                             			Ligation
                                              		</h5>
                                          		</div></a>
@@ Line 773: / Line 1,172: @@
                                                  				<div id="4-3" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>Ligations were either done with T4 DNA ligase distributed by Invitrogen (Cat. No. 15224-017) or by Thermo Scientific (#EL0014).</p>
+<p><u>Invitrogen </u></p>
+<ul>
+<li>Prepare the following reaction mixture and spin briefly.</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount/concentration</th>
+            <tr><td>5X ligase buffer</td><td>4 &micro;L</td></tr>
+            <tr><td>vector DNA</td><td>3-30 fmol</td></tr>
+            <tr><td>insert DNA</td><td>9-90 fmol</td></tr>
+            <tr><td>T4 DNA ligase</td><td>0.1 U</td></tr>
+            <tr><td>ddH<sub>2</sub>O, autoclaved</td><td>to 20 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Incubate at 16&deg;C over night.</li>
+<li>Heat-inactivate at 65&deg;C for 10&nbsp;min.</li>
+</ul>
+<p><u>Thermo Scientific </u></p>
+<ul>
+<li>Prepare the following reaction mixture and spin briefly.</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount/concentration</th>
+            <tr><td>10X ligase buffer</td><td>2 &micro;L</td></tr>
+            <tr><td>vector DNA</td><td>20-100 ng</td></tr>
+            <tr><td>insert DNA</td><td>1:1 to 5:1 molar ratio over vector</td></tr>
+            <tr><td>T4 DNA ligase</td><td>1 U</td></tr>
+            <tr><td>ddH<sub>2</sub>O, autoclaved</td><td>to 20 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Incubate at RT for 1&nbsp;h or at 16&deg;C over night.</li>
+<li>Heat-inactivate at 65&deg;C for 10&nbsp;min.</li>
+</ul>
                                                  				</div>
@@ Line 791: / Line 1,239: @@
                                          		<div class="panel-heading">
                                              		<h5 class="panel-title">
-                                             			Microbial B<sub>12</sub> Plate Assay
+                                             			Blunt End Ligation
                                              		</h5>
                                          		</div></a>
@@ Line 800: / Line 1,248: @@
                                                  				<div id="4-4" class="tab-pane fade in active">
-<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.</p>
+<p>Blunt end ligations were done with T4 DNA ligase distributed by Thermo Scientific (#EL0014).</p>
+<ul>
+<li>Prepare the following reaction mixture and spin briefly.</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount/concentration</th>
+            <tr><td>10X ligase buffer</td><td>2 &micro;L</td></tr>
+            <tr><td>vector DNA</td><td>20-100 ng</td></tr>
+            <tr><td>insert DNA</td><td>1:1 to 5:1 molar ratio over vector</td></tr>
+            <tr><td>50% PEG 4000 solution</td><td>2 &micro;L</td></tr>
+            <tr><td>T4 DNA ligase</td><td>5 U</td></tr>
+            <tr><td>ddH<sub>2</sub>O, autoclaved</td><td>to 20 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Incubate at RT for 1&nbsp;h.</li>
+<li>Heat-inactivate at 65&deg;C for 10&nbsp;min.</li>
+</ul>
@@ Line 812: / Line 1,284: @@
                                      </div>
+<!-- ************** ENTRY 4.5 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#4-5">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			pBAD Directional TOPO<sup>®</sup> Cloning
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="4-5" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="4-5" class="tab-pane fade in active">
+<p>The D-TOPO<sup>&reg;</sup> cloning reaction of pBAD202 was performed according to protocol (Thermo Scientific, K420201). A 0.5:1 to 2:1 molar ratio of PCR product to vector was used. </p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:600px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Chemically competent cells</th>
+<th style="font-size:80%;">Electrocompetent cells</th>
+            <tr><td>Fresh PCR product</td><td>0.5-4 &micro;L</td><td>0.5-4 &micro;L</td></tr>
+            <tr><td>Salt solution</td><td>1 &micro;L</td><td>-</td></tr>
+            <tr><td>Dilute Salt Solution (1:4)</td><td>-</td><td>1 &micro;L</td></tr>
+            <tr><td>ddH<sub>2</sub>O</td><td>add to a final volume of <br/>5 &micro;L</td><td>add to a final volume of <br/>5 &micro;L</td></tr>
+            <tr><td>TOPO<sup>&reg;</sup> vector (pBAD202)</td><td>1 &micro;L</td><td>1 &micro;L</td></tr>
+            <tr><td>Final volume</td><td>6 &micro;L</td><td>6 &micro;L</td></tr>
+</table></div></br>
+<ul>
+<li>Mix reaction gently and incubate for 5&nbsp;min at RT.</li>
+<li>Place the reaction on ice and proceed directly with the transformation of electrocompetent or chemically competent cells.</li>
+</ul>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 4.6 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#4-6">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			DNA Purification
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="4-6" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="4-6" class="tab-pane fade in active">
+<p><p>DNA purification after PCR and restriction was performed using different kits</p>
+<ul>
+<li>SureClean Plus distributed by Bioline (BIO-37047)</li>
+<li>DNA Clean &amp; Concentrator&trade;-25 distributed by Zymo Research (D4033)</li>
+<li>NucleoSpin<sup>&reg;</sup> Gel and PCR Clean-up distributed by Macherey-Nagel (REF740609)</li>
+</ul>
+<p>The procedures were done according to the respective protocol.</p></p>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
@@ Line 828: / Line 1,383: @@
+<!-- ************** PANEL 5 START **************-->
+<div class="panel panel-default">
+<a data-toggle="collapse" data-parent="#accordion" href="#5-0">
+            		<div class="panel-heading">
+                		<h4 class="panel-title">
+                			Analytic Tests
+                		</h4>
+            		</div></a>
+           		<div id="5-0" class="panel-collapse collapse">
+                		<div class="panel-body">
+                    			<div class="tab-content">
+                    				<div id="5-0" class="tab-pane fade in active">
+<!-- ************** SUBPANELS START **************-->
+<!-- ************** ENTRY 5.1 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-1">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Agarose Gel Electrophoresis
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-1" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-1" class="tab-pane fade in active">
-</div> <!-- close text div -->
+<p>For agarose gel electrophoresis, 1.0% agarose gels were prepared. For analytical purpose, the gels were run with the parameters <i>U</i>=90&nbsp;V, <i>I</i>=400&nbsp;mA, <i>t</i>=60&nbsp;min. For preparative purpose, the gels were run with the parameters <i>U</i>=120&nbsp;V, <i>I</i>=400&nbsp;mA, <i>t</i>=35 min.</br>Afterwards, the gels were stained in ethidium bromide solution, and then analyzed by UV light.</p>
-</div> <!-- close col-md-12 div -->
+<p>Gel extractions of DNA were performed using the NucleoSpin<sup>&reg;</sup> Gel and PCR Clean-up kit distributed by Macherey-Nagel (REF740609).</p>
-</div> <!-- close row div -->
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.2 ******************* -->
-<div class="row">
+                            <div class="panel panel-default">
-<div class="col-md-12">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-2">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Expression Test
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-2" class="panel-collapse collapse">
+                                            		<div class="panel-body">
-<div class="text">
+                                                			<div class="tab-content">
-<div class="column full_size">
+                                                				<div id="5-2" class="tab-pane fade in active">
+<p>In preperation for expression studies, the constructs in pBAD202 were transformed into <em>E.&nbsp;coli</em> TOP10, <em>R. planticola</em> or<em> S. blattae</em> cells. The respective cultivation conditions (medium, temperature) are listed in &ldquo;Cultivation and Transformation&rdquo;. The expression assay was done as described in the D-TOPO<sup>®</sup> protocol.</p>
-<p>Describe the experiments, research and protocols you used in your iGEM project.</p>
+<ul>
+<li>For each transformant, inoculate 2&nbsp;mL of medium containing 50&nbsp;&micro;g/mL kanamycin with a single recombinant colony.</li>
+<li>Grow overnight with shaking (225-250&nbsp;rpm) to OD<sub>600</sub>&nbsp;=&nbsp;1-2.</li>
+<li>The next day, label five tubes for each transformant and add 10&nbsp;mL medium (50&nbsp;&micro;g/mL kanamycin) to each tube.</li>
+<li>Inocculate each tube with 0.1&nbsp;mL of the overnight culture.</li>
+<li>Grow the cultures with vigorous shaking to an OD<sub>600</sub>=&nbsp;~0.5.</li>
+<li>Prepare four 10-fold serial dilutions of 20% arabinose with sterile water (e.g 2%, 0.2%, 0.02%, and 0.002%).</li>
+<li>Remove a 1&nbsp;mL aliquot of cells from each tube, centrifuge at maximum speed in a microcentrifuge for 30&nbsp;s and aspirate the supernatant. Freeze the pellet at -20&deg;C as a zero time point sample.</li>
+<li>Add arabinose to the five 9&nbsp;mL cultures according to the following table.</li>
+</ul>
-</div>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Tube</th>
+<th style="font-size:80%;">Stock Solution</th>
+<th style="font-size:80%;">Volume [mL]</th>
+<th style="font-size:80%;">Final concentration</th>
+            <tr><td>1</td><td>0.002%</td><td>0.09</td><td>0.00002%</td></tr>
+            <tr><td>2</td><td>0.02%</td><td>0.09</td><td>0.0002%</td></tr>
+            <tr><td>3</td><td>0.2%</td><td>0.09</td><td>0.002%</td></tr>
+            <tr><td>4</td><td>2%</td><td>0.09</td><td>0.02%</td></tr>
+            <tr><td>5</td><td>20%</td><td>0.09</td><td>0.2%</td></tr>
+</table></div><br/>
-<div class="column half_size">
-<h5>What should this page contain?</h5>
 <ul>
-<li> Protocols </li>
+<li>Grow with shaking for 4&nbsp;h.</li>
-<li> Experiments </li>
+<li>Take 1&nbsp;mL samples at 4&nbsp;h and treat as described for the zero time point sample.</li>
-<li>Documentation of the development of your project </li>
 </ul>
-</div>
+<p>&nbsp;</p>
-<div class="column half_size">
-<h5>Inspiration</h5>
 <ul>
-<li><a href="https://2014.igem.org/Team:Colombia/Protocols">2014 Colombia </a></li>
+<li>Analyze the samples by suspending the pellets in 80&nbsp;&micro;L 1X SDS-PAGE sample buffer.</li>
-<li><a href="https://2014.igem.org/Team:Imperial/Protocols">2014 Imperial </a></li>
+<li>Boil 5&nbsp;min and centrifuge briefly.</li>
-<li><a href="https://2014.igem.org/Team:Caltech/Project/Experiments">2014 Caltech </a></li>
+<li>Load 5-10&nbsp;&micro;L of each sample on an SDS-PAGE gel and electrophorese.</li>
 </ul>
-</div>
+                                                				</div>
-<div class="clear"></div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
-<div class="column half_size">
-</div>
-</div>
+<!-- ************** ENTRY 5.3 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-3">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Cell Fractionation
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-3" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-3" class="tab-pane fade in active">
+<ul>
+<li>Harvest 500&nbsp;mL of cells from an induction experiment by centrifugation and wash three times with 0.9% NaCl.</li>
+<li>Resuspend the pellet in 2&nbsp;mL buffer P (pH 8.0) and incubate for 20-30&nbsp;min on ice.</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Concentration</th>
+            <tr><td>Tris-HCl</td><td>100 mM</td></tr>
+            <tr><td>Sucrose</td><td>20% (w/v)</td></tr>
+            <tr><td>EDTA</td><td>100 mM</td></tr>
+</table></div><br/>
+<ul>
+<li>Centrifuge for 5&nbsp;min (14000&nbsp;rpm, 4&deg;C) and carefully remove the supernatant which contains the periplasm.</li>
+<li>Resuspend the pellet in 2&nbsp;mL buffer P and incubate for 20-30&nbsp;min on ice.</li>
+<li>After another centrifugation for 5&nbsp;min (14000&nbsp;rpm, 4&deg;C) the supernatant with the spheroplasts can be carfully removed.</li>
+<li>The samples can either be stored at -20&deg;C or directly used for analysis.</li>
+</ul>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.4 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-4">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			SDS PAGE
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-4" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-4" class="tab-pane fade in active">
+<p><u>Acrylamid Stocksolution (AA)</u></p>
+<ul>
+<li>40% Acrylamide 4x cryst.- Mix 37.5:1 (Biomol 54535; stored at 4&deg;C)</li>
+</ul>
+<p><u>Resolving gel Stocksolution (RG)</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Tris-HCl</td><td>18.2 g</td></tr>
+            <tr><td>SDS</td><td>0.4 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 8.8 with HCl and bring the volume to 100 mL.</li>
+<li>Store at 4&deg;C.</li>
+</ul>
+<p><u>Stacking gel Stocksolution (SG)</u></p>
+                                                				</div>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Tris-HCl</td><td>6.1 g</td></tr>
+            <tr><td>SDS</td><td>0.4 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O, adjust the pH to 6.8 with HCl and bring the volume to 100 mL.</li>
+<li>Store at 4&deg;C.</li>
+</ul>
+<p><u>10x running buffer</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Tris-HCl</td><td>30.3 g</td></tr>
+            <tr><td>Glycine</td><td>144.1 g</td></tr>
+            <tr><td>SDS</td><td>10 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O and bring the volume to 1 L. The pH should bea around 8.4.</li>
+<li>Store at RT.</li>
+</ul>
+<p><u>4x SDS Loading Dye</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>Tris-HCl</td><td>0.4 g</td></tr>
+            <tr><td>SDS</td><td>1.2 g</td></tr>
+            <tr><td>Glycerine (87% w/v)</td><td>7.5 mL</td></tr>
+            <tr><td>&beta;-Mercaptoethanol</td><td>2.5 mL</td></tr>
+            <tr><td>Bromphenol blue (2%)</td><td>0.5 mL</td></tr>
+</table></div></br>
+<ul>
+<li>Add Tris-HCl and SDS to ddH<sub>2</sub>O and adjust the pH to 6.8.</li>
+<li>Add the rest of the compnents and bring the volume to 50 mL</li>
+<li>Store at -20&deg;C.</li>
+</ul>
+<p><u>Ammoniumpersulfat (APS)</u></p>
+<ul>
+<li>10% APS (w/v) in ddH<sub>2</sub>O</li>
+<li>Store at -20&deg;C.</li>
+</ul>
+<p><u>Pipetting schemes for one gel</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Resolving gel 10%</th>
+<th style="font-size:80%;">Stacking gel 4%</th>
+            <tr><td>AA</td><td>1 mL</td><td>0.2 mL</td></tr>
+            <tr><td>RG</td><td>1 mL</td><td>-</td></tr>
+            <tr><td>SG</td><td>-</td><td>0.48 mL</td></tr>
+            <tr><td>ddH<sub>2</sub>O</td><td>2 mL</td><td>1.32 mL</td></tr>
+            <tr><td>TEMED</td><td>3 &micro;L</td><td>2 &micro;L</td></tr>
+            <tr><td>APS</td><td>30 &micro;L</td><td>15 &micro;L</td></tr>
+</table></div></br>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Resolving gel 15%</th>
+<th style="font-size:80%;">Stacking gel 4%</th>
+            <tr><td>AA</td><td>1.5 mL</td><td>0.2 mL</td></tr>
+            <tr><td>RG</td><td>1 mL</td><td>-</td></tr>
+            <tr><td>SG</td><td>-</td><td>0.48 mL</td></tr>
+            <tr><td>ddH<sub>2</sub>O</td><td>1.5 mL</td><td>1.32 mL</td></tr>
+            <tr><td>TEMED</td><td>3 &micro;L</td><td>2 &micro;L</td></tr>
+            <tr><td>APS</td><td>30 &micro;L</td><td>15 &micro;L</td></tr>
+</table></div></br>
+<p><u>Preperation of SDS-Gels</u></p>
+<ul>
+<li>Glass plates, combs and spacers are cleaned with EtOH (70%) and assembled.</li>
+<li>The resolving gel solution is prepared with TEMED and APS added last for polymerisation. The solution is poured between the assembled galss plates and covered with isopropanol.</li>
+<li>After polymerisation, the isopropanol is removed and the stacking gel is prepared and poured on top of the resolving gel. The combs need to be inserted immediatly.</li>
+<li>After polymerisation, the gels can either be put into the electrophoresis chamber with 1x running buffer or stored at 4&deg;C in a bag with wet tissue.&nbsp;</li>
+</ul>
+<p><u>Preperation of samples</u></p>
+<ul>
+<li>Samples are mixed with SDS loading dye (4:1), denaturated at 95&deg;C for 5 min and breifly centrifuged.</li>
+<li>Up to 15 &micro;L of a sample are loaded into one well.</li>
+</ul>
+<p><u>SDS-PAGE</u></p>
+<ul>
+<li>After loading the samples and a protein marker onto the gel, it is run for 15 min with an electric current of 15 mA current (per gel). Afterwards, the gel is run with an electric current of 30 mA (per gel).</li>
+</ul>
+<p><u>Staining with Coomassie-Brilliant-Blue</u></p>
+<p>The following solutions have to be prepared.</p>
+<p><u>Staining solution</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Final concentration</th>
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>0.05%</td><td>Coomassie-Brilliant-Blue R 250</td><td>0.5 g</td></tr>
+            <tr><td>25%</td><td>Isopropanol</td><td>250 mL</td></tr>
+            <tr><td>10%</td><td>Acetic acid</td><td>100 mL</td></tr>
+</table></div></br>
+<ul>
+<li>Dissolve the components in ddH2O and bring the volume to 1 L.</li>
+<li>The solution can be used more than once and is stored at RT.</li>
+</ul>
+<p><u>Fixation solution</u></p>
+<ul>
+<li>10% acetic acid</li>
+</ul>
+<p>&nbsp;</p>
+<ul>
+<li>Place the SDS-gel in a box with staining solution and heat in the microwave.</li>
+<li>Incubate the gels on a rocker until protein bands become visible.</li>
+<li>Wash the gel with water and discolour it in fixation solution for several hours or overnight.</li>
+</ul>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.5 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-5">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Western Blot
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-5" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-5" class="tab-pane fade in active">
+<p>For Western Blot an Anti-His antibody (Anti-His (C-term)/AP) was used.</p>
+<p>The following solutions need to be prepared for the procedure.</p>
+<p><u>10x TBS buffer</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Final concentration</th>
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>0.1 M</td><td>Tris-HCl (MW 121.14)</td><td>6.057 g</td></tr>
+            <tr><td>1.4 M</td><td>NaCl (MW 58.44)</td><td>40.91 g</td></tr>
+</table></div></br>
+<ul>
+<li>Dissolve the components in ddH<sub>2</sub>O, adjust the pH to 7.4 and bring the volume to 500&nbsp;mL.</li>
+<li>Store at RT.</li>
+</ul>
+<p><u>1x Transfer buffer</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Final concentration</th>
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>25 mM</td><td>Tris-HCl (MW 121.14)</td><td>3.029 g</td></tr>
+            <tr><td>192 mM</td><td>Glycine (MW 75.07)</td><td>14.41 g</td></tr>
+            <tr><td> </td><td>Methanol</td><td>200 mL</td></tr>
+</table></div></br>
+<ul>
+<li>Dissolve the components in ddH<sub>2</sub>O and bring the volume to 1 L. The pH should be between 8.1 and 8.4.</li>
+<li>Store at RT.</li>
+</ul>
+<p><u>10x TBS-Tween buffer</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Final concentration</th>
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>0.1 M</td><td>Tris-HCl (MW 121.14)</td><td>6.057 g</td></tr>
+            <tr><td>1.4 M</td><td>NaCl (MW 58.44)</td><td>40.91 g</td></tr>
+            <tr><td>0.1%</td><td>Tween20</td><td>0.5 mL</td></tr>
+</table></div></br>
+<ul>
+<li>Dissolve the components in ddH<sub>2</sub>O, adjust the pH to 7.4 and bring the volume to 500&nbsp;mL.</li>
+<li>Store at RT.</li>
+</ul>
+<p><u>Blocking Solution</u></p>
+<ul>
+<li>Dissolve 2.5&nbsp;g skim milk in 50&nbsp;mL 1x TBS buffer.</li>
+<li>It has to be prepared freshly.</li>
+</ul>
+<p><u>Phosphatase buffer</u></p>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:500px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Final concentration</th>
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>0.1 M</td><td>Tris-HCl (MW 121.14)</td><td>6.057 g</td></tr>
+            <tr><td>0.1 M</td><td>NaCl (MW 58.44)</td><td>40.91 g</td></tr>
+            <tr><td>5 mM</td><td>MgCl<sub>2</sub> x 6 H<sub>2</sub>O (MW 203.3)</td><td>0.51 g</td></tr>
+</table></div></br>
+<ul>
+<li>Dissolve the components in ddH<sub>2</sub>O, adjust the pH to 7.4 and bring the volume to 500&nbsp;mL.</li>
+<li>Store at RT.</li>
+</ul>
+<p>In preparation for the Western Blot, a SDS-PAGE with a Protein Ladder, which is compatible with Western Blot, has to be run.</p>
+<ul>
+<li>Prepare 6 gel sized Whatman paper and gel sized blot membrane by soaking them in 1x Transfer buffer.</li>
+<li>Set up the Western Blot. Place 3 moist Whatman papers on the anode (base of blotter), followed by the moist membrane, the unstained SDS-gel, 3 moist Whatman papers and the cathode (lid of blotter).</li>
+<li>Blot at 200&nbsp;mA (1 gel) and constant 10&nbsp;V for 1&nbsp;h.</li>
+<li>Wash the membrane three times for 5&nbsp;min with 1x TBS buffer on a rocker.</li>
+<li>Block with 50&nbsp;mL 1x TBS buffer with 5% skim milk for 1&nbsp;h or over night on a rocker.</li>
+<li>Wash three times for 15&nbsp;min with 1x TBS buffer on a rocker.</li>
+<li>Incubate with antibody solution (14&nbsp;mL 1x TBS-Tween buffer + 200&nbsp;&micro;L 1x TBS buffer/5% skim milk + 7&nbsp;&micro;L antibody) for 2&nbsp;h on a rocker.</li>
+<li>Wash two times shortly with 1x TBS-Tween buffer.</li>
+<li>Wash once with 1x TBS-Tween buffer for 15&nbsp;min on a rocker.</li>
+<li>Wash two times with 1x TBS-Tween buffer for 5&nbsp;min on a rocker.</li>
+<li>Wash two times with 1x TBS buffer for 10&nbsp;min on a rocker.</li>
+<li>Wash two times shortly in 1x phosphatase buffer.</li>
+<li>Place the membrane in staining solution (10ml 1x phosphatase buffer + 66&micro;l NBT + 33&micro;l BCIP), stain in the dark until bands become visible.</li>
+<li>Wash with H<sub>2</sub>O to stop the reaction.</li>
+<li>Dry the membrane in Whatman paper and scan it.</li>
+</ul>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.6 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-6">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Microbial B<sub>12</sub> Plate Assay
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-6" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-6" class="tab-pane fade in active">
+<p>The B<sub>12</sub> Plate Assay allows the detection of corrinoids in cell extracts or supernatants. It is based on the fact, that <em>E. coli</em> DSM 4261 relies on its B<sub>12</sub> dependent methionine synthase which is encoded by <em>metH</em>. This is caused by a point mutation in <em>metE</em> which encodes the B<sub>12</sub> independent methionine synthase. In a medium without methionine, <em>E. coli</em> DSM 4261 therefore relies on the presence of B<sub>12</sub>.</p>
+<p><u>Cultivation of <em>E. coli</em> DSM 4261</u></p>
+<ul>
+<li>50 mL of Guttman medium are inoculated with a 5 mL preparatory overnight culture.</li>
+<li>The cells are harvested at an OD<sub>600</sub> of 0.2, washed three times with 20 mL 0.9% NaCl and afterwards resuspended in the same volume NaCl.</li>
+</ul>
+<p><u>Preparation of samples</u></p>
+<ul>
+<li>After induction, the cells are centrifuged down, and washed three times with 0.1 M sodium chloride solution.:</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>K<sub>2</sub>HPO<sub>4</sub></td><td>13.6 g</td></tr>
+            <tr><td>KH<sub>2</sub>PO<sub>4</sub> &middot; 3 H<sub>2</sub>O</td><td>22.8 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH2O, adjust the pH tp 7.0 and bring the volume to 1 L.</li>
+<li>Periplasm, cytoplasm and crude cell extracts from different expression studies are used as samples.</li>
+</ul>
+<p><u>Assay</u></p>
+<ul>
+<li>7 mL of the cell suspension, 50 mM and 0.2 g/L triphenyltetrazoliumchloride are added to 500 mL of the autoclaved mineral-agar (50&deg;C).</li>
+</ul>
+<div class="table-responsive"><table class="table1" style="width:100%; max-width:400px">
+<tr style="font-weight:bold;">
+<th style="font-size:80%;">Component</th>
+<th style="font-size:80%;">Amount</th>
+            <tr><td>K<sub>2</sub>HPO<sub>4</sub></td><td>7 g</td></tr>
+            <tr><td>KH<sub>2</sub>PO<sub>4</sub></td><td>3 g</td></tr>
+            <tr><td>(NH<sub>4</sub>)<sub>2</sub>SO<sub>4</sub></td><td>1 g</td></tr>
+            <tr><td>MgSO<sub>4</sub> &middot; 7 H<sub>2</sub>O</td><td>0.1 g</td></tr>
+            <tr><td>Na<sub>2</sub>citrate &middot; 2 H<sub>2</sub>O</td><td>3 g</td></tr>
+            <tr><td>Agar Bacteriological</td><td>15 g</td></tr>
+</table></div></br>
+<ul>
+<li>Add components to ddH<sub>2</sub>O and bring the volume to 1 L.</li>
+<li>4 sterile filter papers (&Oslash; 0.9 cm, Fa. Schleicher &amp; Schuell, Dassel) are laid onto the plates and loaded with 10-15&nbsp;&micro;L of a sample or a Vitamin B<sub>12</sub> calibration solution (0, 0.05, 0.25, 0.1, 5.0 &mu;g/ml). Every sample or concentration is analyzed twice.</li>
+<li>The plates are incubated at 37&deg;C for 16-24 h.</li>
+</ul>
+<p>If the samples contained Vitamin B<sub>12</sub>, the cells grow in a red zone around the filter paper. The size is proportional to the Vitamin <sub>12</sub> concentration and the reduction of triphenyltetrazoliumchloride causes the red staining.</p>
+<ul>
+<li>To analyze the B<sub>12</sub> concentration in the samples, the diameter of the red zone is measured and compared to the calibrations.</li>
+</ul>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.7 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-7">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Photometric B<sub>12</sub> Assay
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-7" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-7" class="tab-pane fade in active">
+<p>To determine the corrinoid concentration in a sample, the corrinoids have to be converted into the soluble dicyano form and proteins and lipids have to be removed by precipitation and centrigugation.</p>
+<ul>
+<li>Incubate 1&nbsp;mL of your sample with 0.2%&nbsp;(w/v) NaCN or KCN for 30&nbsp;min at RT in the dark.</li>
+<li>Acidify the solution with pure acetic acid to a pH of 4.0.</li>
+<li>Boil the samples at 100&deg;C for 20&nbsp;min.</li>
+<li>Let the sample cool down and adjust the pH to 11.0 with KOH.</li>
+<li>Add 4-5&nbsp;mg NaCN or KCN.</li>
+<li>Centriguge at 13,000&nbsp;rpm for 30&nbsp;min at RT.</li>
+<li>Measure a spectrum of the supernatant from 350 to 650&nbsp;nm.</li>
+</ul>
+<p>The concentration of Vitamin B<sub>12</sub> can be calculated with help of the molar extinction coefficient of dicyano cobalamine (&Delta;&epsilon;<sub>580-640</sub>&nbsp;=&nbsp;7.3&nbsp;mM<sup>-1</sup> &middot;&nbsp;cm<sup>-1</sup>) by determining the differences in the absorption at 580 and 650&nbsp;nm. <br /> Alternatively, the concentration of Vitamin B<sub>12</sub> can also be determined with the extinction coefficients of dicyano cobalamine at 580&nbsp;nm (&epsilon;<sub>540</sub>&nbsp;=&nbsp;7800&nbsp;mM<sup>-1</sup> &middot;&nbsp;cm<sup>-1</sup>) and 367&nbsp;nm (&Delta;&epsilon;<sub>367</sub>&nbsp;=&nbsp;23800&nbsp;mM<sup>-1</sup> &middot;&nbsp;cm<sup>-1</sup>) by calculating the average. <br /> As a standard hydroxyl cobalamine and cyano cobalamine are used.</p>
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** ENTRY 5.8 ******************* -->
+                            <div class="panel panel-default">
+                            <a data-toggle="collapse" data-parent="#accordion" href="#5-8">
+                                        		<div class="panel-heading">
+                                            		<h5 class="panel-title">
+                                            			Bradford Assay
+                                            		</h5>
+                                        		</div></a>
+                                       		<div id="5-8" class="panel-collapse collapse">
+                                            		<div class="panel-body">
+                                                			<div class="tab-content">
+                                                				<div id="5-8" class="tab-pane fade in active">
+<p><u>Bradford solution</u></p>
+<ul>
+<li>Mix 800&nbsp;mL ddH<sub>2</sub>O&nbsp;with&nbsp;200&nbsp;mL RotiQuant (5X) (Carl Roth).</li>
+<li>Store at 4&deg;C protected from light.</li>
+<li>After preparing a new solution, the Bradford factor has to be determined by measuring a standard curve from protein standards with known concentrations.</li>
+</ul>
+<p><u>Measuring protein sample</u></p>
+<ul>
+<li>Mix 20&nbsp;&micro;L of the sample with 1mL Bradford solution in a photometer cuvette. Prepare triplicates.</li>
+<li>Also prepare a blank by mixing 20&nbsp;&micro;L ddH<sub>2</sub>O with 1&nbsp;mL Bradford solution in a photometer cuvette.</li>
+<li>Incubate for 5 min at RT protected from light.</li>
+<li>Measure the absorbance at 595&nbsp;nm against the black. It should lie between 0.1 and 0.6, otherwise the protein sample has to be diluted.</li>
+</ul>
+<p><u>Calculation of protein concentration</u></p>
+<img src="https://static.igem.org/mediawiki/2016/1/19/T--Goettingen--Bradford.png">
+                                                				</div>
+                                                			</div>
+                                            		</div>
+                                        		</div>
+                                    </div>
+<!-- ************** END OF 5.x *******************-->
+                    				</div>
+                    			</div>
+                		</div>
+            		</div>
+        </div>
+<!-- ************** PANEL 5 END *******************-->
+</div> <!-- close text div -->
+</div> <!-- close col-md-12 div -->
 </div> <!-- close row div -->
-</div> <!-- close col-md-9 div -->
@@ Line 975: / Line 2,154: @@
 			<ul class="submenu">
 				<li> <a  href="https://2016.igem.org/Team:Goettingen/Description">Description</a></li>
-				<li> <a href="https://2016.igem.org/Team:Goettingen/Design">Design</a></li>
 				<li> <a style="background-color: #D8D8D8;" href="https://2016.igem.org/Team:Goettingen/Experiments"><b>Experiments</b></a></li>
 				<li> <a href="https://2016.igem.org/Team:Goettingen/Proof">Proof of Concept</a></li>
-				<li> <a href="https://2016.igem.org/Team:Goettingen/Demonstrate">Demonstrate</a></li>
 				<li> <a href="https://2016.igem.org/Team:Goettingen/Results"> Results </a></li>
 				<li> <a href="https://2016.igem.org/Team:Goettingen/Notebook"> Notebook </a></li>
@@ Line 988: / Line 2,165: @@
    <li> <a href="https://2016.igem.org/Team:Goettingen/Parts">Parts</a></li>
    <li> <a href="https://2016.igem.org/Team:Goettingen/Basic_Part">Basic Parts </a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Composite_Part">Composite Parts</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Part_Collection">Part Collection</a></li>
    </ul>
    </li>
@@ Line 1,003: / Line 2,178: @@
    <ul class="submenu">
    <li> <a href="https://2016.igem.org/Team:Goettingen/Human_Practices">Human Practices</a></li>
-   <li> <a href="https://2016.igem.org/Team:Goettingen/HP/Silver">Silver</a></li>
+   <li> <a href="https://2016.igem.org/Team:Goettingen/HP/Silver">HP on the Road</a></li>
-   <li> <a href="https://2016.igem.org/Team:Goettingen/HP/Gold">Gold</a></li>
+   <li> <a href="https://2016.igem.org/Team:Goettingen/HP/Gold">HP on the Web</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Integrated_Practices">Integrated Practices</a></li>
    <li> <a href="https://2016.igem.org/Team:Goettingen/Engagement">Engagement</a></li>
    </ul>
    </li>
-  <li class="menu_item"> <div class="icon plus"></div> Awards
-  <ul class="submenu">
-  <li><a href="https://2016.igem.org/Team:Goettingen/Entrepreneurship">Entrepreneurship</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Hardware">Hardware</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Software">Software</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Measurement">Measurement</a></li>
-  <li> <a href="https://2016.igem.org/Team:Goettingen/Model">Model</a></li>
-  </ul>
-  </li>
    </ul>
@@ Line 1,039: / Line 2,203: @@
    <div class="sidebarsponsors" >
-   <a href="https://www.bbraun.de/de.html"><img style="width: 100%; height: 100%;" src="https://static.igem.org/mediawiki/2016/5/5c/T--Goettingen--bbraun_small.png" alt="bbraun" /></a>
+   <a href="https://www.bbraun.de/de.html"><img style="width: 100%; height: 100%; margin-bottom:0;" src="https://static.igem.org/mediawiki/2016/6/6d/T--Goettingen--sartorius_small.png" alt="sartorius" /></a>
+  <a href="https://www.bbraun.de/de.html"><img style="width: 100%; height: 100%; margin-top:0;" src="https://static.igem.org/mediawiki/2016/5/5c/T--Goettingen--bbraun_small.png" alt="bbraun" /></a>

Difference between revisions of "Team:Goettingen/Experiments"

Latest revision as of 03:35, 20 October 2016

Experiments

Overview of Experiments

1. Production Strains

2. BioBricks

3. Transformation and Cultivation

4. Expression Test

5. Vitamin B12 Assays

5.1. Microbial Assay

5.1. Photometric Assay

Protocols

Media

LB Medium

M9 Minimal Medium

RM Medium

MM medium

Guttman Medium (B12 Assay)

Cultivation and Transformation

Cultivation of Escherichia coli

Cultivation of Raoultella planticola

Cultivation of Shimwellia blattae

Preparation of Electrocompetent Cells

Transformation of Electrocompetent Cells by Electroporation

Transformation of Chemically Competent Cells by Heat-Shock

Plasmid preparation

PCR methods

PCR with Phusion DNA Polymerase

Fusion PCR

16S rDNA Colony PCR

Plasmid Construction

Digestion of DNA with Restriction Enzymes

Phosphorylation of DNA

Ligation

Blunt End Ligation

pBAD Directional TOPO® Cloning

DNA Purification

Analytic Tests

Agarose Gel Electrophoresis

Expression Test

Cell Fractionation

SDS PAGE

Western Blot

Microbial B12 Plate Assay

Photometric B12 Assay

Bradford Assay

Contact

Navigation

Sponsors

5. Vitamin B₁₂ Assays

Guttman Medium (B₁₂ Assay)

pBAD Directional TOPO^® Cloning

Microbial B₁₂ Plate Assay

Photometric B₁₂ Assay