Team:Goettingen/Experiments


Experiments

Overview of Experiments

1. Production Strains

In order to ensure that the bacteria we are working with are really the ones we want to work with, a 16S rDNA PCR was performed.

As an antibiotic resistance will be used in our later experiments to select transformants, we checked for any native antibiotic resistance against ampicillin, kanamycin, tetracyclin and chloramphenicol in an LB agar plate growth test. It turned out that kanamycin was the only antibiotic, against which none of our strains showed any resistance. For this reason, we decided to use only vectors with kanamycin resistance for our later projects.

After this, we prepared electro competent cells from our strains. All of our strains were grown on LB medium.

2. BioBricks

Our BioBricks were designed using the software SnapGene. The original Genes for our B12 binding proteins, and the torA signal sequence were codon optimized for E. coli.

The DNA containing the Genes were synthesized and friendly provided by IDT Integrated DNA Technologies.

In case of MutB, the length of the gene exceeded the maximum length of 2000 bp from IDT. For this reason, we designed two DNA parts, with a natural occurring HindIII restriction site at both ends. We intended to fuse these both genes by ligation. However, after having diffuculties to fuse the genes by ligation, we decided to fuse them by fusion PCR. In order to multiply the DNA for or cloning experiments, and to equip our genes with restriction sites, PCR was used.

For our purpose, we were searching for a vector with (a) kanamycin resistance and (b) araBAD operon. We thus decided to use the pBAD202 expression system. This vector, however, is equipped with a thioredoxin fusion protein which increases the rate of expression, but prohibits the physiological function of our protein. For this reason, we designed primers for an autarkic synporter protein. In order to test the dependence of the expression system on the B12 export rate, we also decided to use different other vectors.

For vectors ligation, we used a standart ligase reaction, for the pBAD202 expression, which works without ligation but topoisomerase reaction, we followed the manufacturer's protocol.

3. Transformation and Cultivation

For our transformation experiments, we used electroporation for all our self prepared competent cells. For the heat competent E. coli Top10 cells provided with the pBAD202 expression system, we used the manufacturer's heat shock transformation protocol.

For vector multiplication, E. coli cells (Top10 for pBAD202 plasmids, DH5alpha for all other plasmids) were transformed with the constructed plasmids. After the transformation, the cells were cultivated on LB Medium. Transformants were selected, and the respective clones were picked, cultivated in LB medium, and plasmids were extracted.

The Plasmids were then introduced into the production strains: Raoultella planticola ATCC 33531, Shimwellia blattae ATCC 29907.

For the expression experiments, the all cells were cultivated and the expression induced in RM medium under aerobic conditions. As S. blattae is known to produce Vitamin B12 only under anaerobic conditions, the expression was induced under anerobic conditions in RM medium.

The induction was performed using different concentrations of l-arabinose and different induction time spans.

4. Expression Test

To test for the expression of our synporter protein, the cell lysates of the expression cultures we submitted to an SDS-PAGE. From the SDS Gels, Western Blots were performed using anti-Poly-Histidine-tag antibodies.

5. Vitamin B12 Assays

To test the physiological function of our synporter protein, different assays for B12 detection were performed. For the assays, (a) the whole cell filtered medium, and (b) the periplasm fraction of the cells were examined.

The periplasm fraction of the producing cells was gained by ultrazentrifugation.

5.1. Microbial Assay

The microbial B12 assay relies on the growth diameter of the E. coli ATCC 10799 strain on an agar plate, in dependence of the Vitamin B12 (or methionine) concentration in the medium.

For this purpose, agar plates with synthetic Guttman medium (free of B12 and amino acids, 1.5% agarose) were prepared. The E coli detection cells were grown in liquid synthetic Guttman medium supplemented with selected amino acids (no methionine) and Vitmamin B12. Afterwards, the cells were washed with PBS buffer three times, in order to make the cells virtually free of Vitamin B12. The cells were resuspended in PBS buffer, and mixed with warm, liquid Guttman medium (free of B12 and amino acids, 0.8% agarose), and then poured on the prepared agar plates. For the assay, small paper platelets (usually used for antibiotic tests) were placed on the top agar layer, and soaked with differently concentrated calibration solutions of Vitamin B12. The plates were incubated overnight, and the diameters measured after 16 h. From the different diameters, dependent of the Vitamin B12 concentration, a calibration curve was calculated.

In order to determine the B12 content of our medium and periplasm fraction, the assay plates were prepared exactly as described above, and paper platelets were soaked with the respective solution. Comparing to the calibration curve, the diameter indicates the B12 amount.

5.1. Photometric Assay

Protocols

Media

LB Medium
Component Amount
tryptone10 g
NaCl10 g
Yeast extract5 g
optional:
Agar-agar15 g

  • Add components to ddH2O and adjust volume to 1 L.
  • Autoclave for 20 min at 121 °C.
M9 Minimal Medium
Component Amount
Na2HPO410 g
KH2PO410 g
NH4Cl5 g
NaCl15 g

  • Add components to ddH2O, adjust the pH to 7.0 and bring the volume to 987 mL.
  • Autoclave for 20 min at 121 °C.
  • Add the following
Component Stock solution Amount
glucose20 %10 mL
MgSO4 · 7 H2O1 M1 mL
Thiamine · HCl30 mM1 mL
CaCl20.13 M1 mL
RM Medium

The dehydrated medium is distributed by Laboratories Conda (Cat. 1542) and was prepared according to protocol.

Guttman Medium (B12 Assay)
Component Amount
K2HPO414 g
KH2PO46 g
(NH4)2SO42 g
MgSO4 · 7 H2O0.2 g
Na2citrate · 2 H2O1 g
L-Asparagine0.8 g
L-Arginine0.2 g
L-Glutamic acid0.2 g
Glycine0.2 g
L-Tryptophan0.2 g
L-Prolin0.2 g
L-Histidine0.2 g
Vitamin B1240 µg

  • Add components to ddH2O, adjust the pH to 6.8-7.2 and bring the volume to 1 L.
  • 50 mM glucose have to be added seperatly before the inoculation.
S. blattae Medium Anaerobic

Mineral medium with additon of yeast extract

Component Amount
K2HPO414 g
KH2PO46 g
(NH4)2SO43 g
MgSO4 · 7 H2O0.2 g
Yeast extract0.2 g
CoCl2 (50 mM)85 µL
SL-41 mL

  • Add components to ddH2O, adjust the pH to 7.5 and bring the volume to 1 L.
  • 100 mM glycerine are added seperatly to the medium.

SL-4: Trace element solution (Pfenning and Lippert, 1966)

Component Amount
EDTA-Na25 g
FeSO4 · 7 H2O2 g
ZnSO4 · 7 H2O0.1 g
MnCl2 · 4 H2O0.03 g
H3BO40.3 g
CoCl2 · 6 H2O0.2 g
CuCl2 · 2 H2O0.01 g
NiCl2 · 6 H2O0.02 g
NaMoO4 · 2 H2O0.03 g

  • Add components to ddH2O, adjust the pH to 6.7 and bring the volume to 1 L.
  • The solution is stored at 4 °C and protected from light.

Cultivation and Transformation

Cultivation of Escherichia coli, Shimwellia blattae and Salmonella typhimurium TA 100

S. blattae, S. typhimurium TA100, R. platicola and E. coli strains are grown in LB medium at 37 °C.
S. typhimurium TA100 has a natural ampicillin resistence. Therefore, 25 µg/mL ampicillin have to be added to the medium.

Cultivation of Raoultella planticola

R. platicola platicola is grown in LB medium at its temperature optimum of 30 °C.

Preperation of the Periplasm for Analysis
  • Harvest 500 mL of cells from an induction experiment by centrifugation and wash three times with 0.9 % NaCl.
  • Resuspend the pellet in 2 mL buffer P (pH 8.0) and incubate for 20-30 min on ice.
Component Concentration
Tris-HCl100 mM
Sucrose20 % (w/v)
EDTA100 mM

  • Centrifuge for 5 min (14000 rpm, 4 °C) and carefully remove the supernatant which contains the periplasm.
  • Resuspend the pellet in 2 mL buffer P and incubate for 20-30 min on ice.
  • After another centrifugation for 5 min (14000 rpm, 4 °C) the supernatant with the spheroplasts can be carfully removed.
  • The samples can either be stored at -20 °C or directly used for analysis.
Preparation of Electrocompetent Cells

Material to prepare

  • 2x 5 mL LB
  • 250 mL LB in 1 L Erlenmeyer flask with chicane
  • 500 mL sterile Millipore-H2O at 4 °C
  • 50 mL sterile glycerol (10 % (w/v)) at 4 °C
  • 30 sterile labeled Eppendorf cups at – 20°C or -80 °C
  • 1x sterile GS3 jar at 4 °C
  • 1x Aquatron at 30 °C
  • 1x Sorvall RC6 centrifuge at 4 °C
  • 1x Universal 320R centrifuge at 4 °C
  • 1 L liquid nitrogen

 

Day 1

  • Inoculate 2x 5 mL LB (if required with antibiotics) with your strain of interest, either from cryo culture or from agar plate.
  • Incubate overnight at 37 °C and 150 rpm.

 

Day 2

  • Inoculate 250 mL LB (without antibiotics) with 2 % (5 mL) preculture.
  • Incubate in the Aquatron at 30 °C and 160 rpm until OD600 of 0.5-0.8.
  • Check the culture via microscope for contaminations.

All liquids and containers must be cooled on ice. The major task of cell preparation is the removal of salts. In case of some strains like pLys-strains, the pellets must be resuspended very carefully.

  • Let the cells (OD600 of 0.5-0.8) cool down in ice water for 10-20 min. All further steps are performed under cool conditions.
  • Decant the cells in sterile GS3 jar and centrifuge at 4 °C and 5000 rpm (4230 g) for 5-10 min.
  • Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4 °C ddH2O.
  • Centrifuge the GS3 jar at 4 °C and 5000 rpm (4230 g)for 5-10 min.
  • Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 250 mL sterile 4 °C ddH2O.
  • Centrifuge the GS3 jar at 4 °C and 5000 rpm (4230 g)for 5-10 min.
  • Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4 °C glycerol (10 % (w/v)). Afterwards, transfer the culture into a 50 mL Falcon tube.
  • Centrifuge the Falcon tube at 4 °C and 6200 rpm (4230 g) for 5-10 min.
  • Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 10 mL sterile 4 °C glycerol (10 % (w/v)).
  • Centrifuge the Falcon tube at 4 °C and 6200 rpm (4230 g) for 5-10 min.
  • Remove supernatant (directly next to the centrifuge or the pellet might resolve) and resuspend the pellet in 500 µL sterile 4 °C glycerol (10 % (w/v)).
  • Aliquot the cells into the Eppendorf cups (40 µL per Eppendorf cup). While aliquoting, filled Eppendorf cups must be frozen directly in liquid nitrogen.
  • Store the filled Eppendorf cups in a cryobox at -80 °C.
Transformation of Electrocompetent Cells by Electroporation
  • Mix 50-200 ng plasmid DNA with 40 µL of competent cells (always defrost on ice!). Transfer attempt into precooled electroporation cuvette. Incubate on ice for 10 min.
  • Important: DNA must be salt free! Use either directly in ddH2O eluted plasmids, or (e.g. directly after ligation) desalt the DNA for 30 min on a Millipore filter (MF Membrane Filters).
  • Electroporation: 2500 V for 2 mm cuvettes (1250 V for 1 mm cuvettes), 25 µF, 200 Ω, discharging time should be 3-5 msec. Contacts of the electroporation cuvette must be dry. Remove all air bubbles before electroporation.
  • Immediately add 960 µL liquid LB (or, if available, SOC medium for a higher transformation efficiency) into the cuvette and transfer the content into a 2 ml Eppendorf cup.
  • Incubate at 37 °C and 150 rpm for 1 h. Fix tube in horizontal position with tape.
  • Plate 100 µL of 10-3 to 10-6 dilutions on plates with selection pressure
  • Incubate at 37 °C overnight.
Transformation of Chemically Competent Cells by Heat-Shock

One Shot®TOP10 Competent cells (ThermoFisher) were transformed following the respective protocol for chemical transformation:

  • Add 3 µL of the TOPO®Cloning Reaction into a vial of competent E. coli cells and mix gently by inverting.
  • Incubate on ice for 5-30 min.
  • Heat-shock the cells for 30 s at 42 °C without shaking.
  • Immediately transfer the tubes on ice.
  • Add 250 µL of S.O.C. medium (RT), cap the tube tightly and shake it horizontally (200 rpm) at 37 °C for 1 h.
  • Spread 100-200 µL of different volumes or dilutions from each transformation on a prewarmed selective plate and incubate overnight at 37 °C.
  • Pick colonies for analysis.
Plasmid preparation

Small scale preparation of plasmid DNA was performed using the NucleoSpin® Plasmid kit distributed by Macherey-Nagel (REF 740588) according to protocol.

PCR methods

PCR with Phusion DNA Polymerase

Phusion® High-Fidelity DNA Polymerase is used for all standard PCR amplifications.

Pipetting scheme

Component 20 µL reaction 50 µL reaction Final concentration
Nuclease-free waterto 20 µLto 50 µL
5X Phusion HF buffer4 µL10 µL1X
10 mM dNTPs0.4 µL1 µL200 µM
10 µM forward primer1 µL2.5 µL0.5 µM
10 µM reverse primer1 µL2.5 µL0.5 µM
Template DNAvariablevariable1 pg - 10 ng
DMSO (optional)(0.6 µL)(1.5 µL)3 %
Phusion DNA Polymerase0.2 µL0.5 µL0.02 U/µL

  • Mix all components, adding the DNA polymerase last and spin down.

Cycling

Step Temperature Time Cycles
Initial Denaturation98 °C30 s1
Denaturation98 °C10 s25-35
AnnealingX °C30 s
Extension72 °C15-30 s/kb
Final Extension72 °C10 min1
4 °Chold

  • To optimize the annealing temperature for each primer pair, a temperature gradient can be run.
Fusion PCR

Fusion PCR was performed according to Harrison et al.

Pipetting scheme

Component 50 µL reaction Final concentration
Nuclease-free waterto 50 µL
5X Phusion HF buffer10 µL1X
10 mM dNTPs1 µL200 µM
50 mM MgCl21.25 µL1.25 mM
10 µM forward primer1 µL0.2 µM
10 µM reverse primer1 µL0.2 µM
Template DNAvariable
DMSO1.5 µL3 %
Phusion DNA Polymerase0.5 µL0.02 U/µL

  • Mix all components, adding the DNA polymerase last and spin down.

Cycling

Step Temperature Time Cycles
Initial Denaturation98 °C1 min1
Denaturation98 °C10 s4
Annealing68 ± 4 °C30 s
Extension72 °C40 s
Denaturation98 °C10 s27
Annealing68 ± 4 °C30 s
Extension72 °C50 s
Final Extension72 °C10 min1
4 °Chold

  • To optimize the annealing temperature for each primer pair, a temperature gradient can be run.
16S rDNA PCR

16S rDNA PCR was performed to check the identity of the bacterial strains we were working with. For this, colonies were picked and resuspended in 50 µL ddH2O.

Pipetting scheme

Component Amount
Nuclease-free waterto 50 µL
Optibuffer5 µL
10 mM dNTPs5 µL
5 mM forward primer (16S08)4 µL
5 mM reverse primer (150UR)4 µL
Template DNA1 µL (suspension)
MgCl23 µL
Phusion DNA Polymerase0.5 µL

  • Mix all components, adding the DNA polymerase last and spin down.
Colony PCR

Text

Plasmid Construction

Digestion of DNA with Restriction Enzymes

Plasmid DNA and PCR products were digested according to FastDigest protocol (Thermo Scientific).

Component Plasmid DNA PCR product
Water, nuclease free15 µL17 µL
10X FastDigest or 10X FastDigest Green buffer2 µL2 µL
DNA2 µL
(up to 1 µg)		10 µL
(~0.2 µg)
FastDigest enzyme1 µL1 µL

  • Mix gently and spin down.
  • Incubate at 37 °C in a heat block or water thermostat for X min.
  • Inactivate the enzyme by heating for X min at X °C.
  • If the FastDigest Green Buffer was used in the reaction, an aliquot of the reaction mixture can be loaded directly on an agarose gel.

Incubation time and inactivation time and temperature depend on the FastDigest enzyme.

Phosphorylation of DNA

MutB2 DNA was phosphorylated with T4 Polynucleotide Kinase (T4 PNK) according to protocol (NEB, #M0201).

Component Amount
DNAup to 300 pmol of 5' termini
T4 PNK Reaction Buffer (10X)5 µL
ATP (10 mM)5 µL
T4 PNK1 µL (10 units)
Nuclease-free waterup to 50 µL

  • Prepare reaction mixture on ice.
  • Incubate at 37 °C for 30 min.
  • Heat inactivate at 65 °C for 20 min.
Ligation

Ligations were either done with T4 DNA ligase distributed by Invitrogen (Cat. No. 15224-017) or by Thermo Scientific (#EL0014).

Invitrogen

  • Prepare the following reaction mixture and spin briefly.
Component Amount/concentration
5X ligase buffer4 µL
vector DNA3-30 fmol
insert DNA9-90 fmol
T4 DNA ligase0.1 U
ddH2O, autoclavedto 20 µL

  • Incubate at 16 °C over night.
  • Heat-inactivate at 65 °C for 10 min.

Thermo Scientific

  • Prepare the following reaction mixture and spin briefly.
Component Amount/concentration
10X ligase buffer2 µL
vector DNA20-100 ng
insert DNA1:1 to 5:1 molar ratio over vector
T4 DNA ligase1 U
ddH2O, autoclavedto 20 µL

  • Incubate at RT for 1 h or at 16 °C over night.
  • Heat-inactivate at 65 °C for 10 min.
Blunt End Ligation

Blunt end ligations were done with T4 DNA ligase distributed by Thermo Scientific (#EL0014).

  • Prepare the following reaction mixture and spin briefly.
Component Amount/concentration
10X ligase buffer2 µL
vector DNA20-100 ng
insert DNA1:1 to 5:1 molar ratio over vector
50% PEG 4000 solution2 µL
T4 DNA ligase5 U
ddH2O, autoclavedto 20 µL

  • Incubate at RT for 1 h.
  • Heat-inactivate at 65 °C for 10 min.
pBAD Directional TOPO® Cloning

The D-TOPO® cloning reaction of pBAD202 was performed according to protocol (Thermo Scientific, K420201). A 0.5:1 to 2:1 molar ratio of PCR product to vector was used.

Component Chemically competent cells Electrocompetent cells
Fresh PCR product0.5-4 µL0.5-4 µL
Salt solution1 µL-
Dilute Salt Solution (1:4)-1 µL
ddH2Oadd to a final volume of
5 µL		add to a final volume of
5 µL
TOPO® vector (pBAD202)1 µL1 µL
Final volume6 µL6 µL

  • Mix reaction gently and incubate for 5 min at RT.
  • Place the reaction on ice and proceed directly with the transformation of electrocompetent or chemically competent cells.
DNA Purification

DNA purification after PCR and restriction was performed using different kits

  • SureClean Plus distributed by Bioline (BIO-37047)
  • DNA Clean & Concentrator™-25 distributed by Zymo Research (D4033)
  • NucleoSpin® Gel and PCR Clean-up distributed by Macherey-Nagel (REF740609)

The procedures were done according to the respective protocol.

Analytic Tests

Agarose Gel Electrophoresis

Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.

Expression Test

Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium.

SDS Polyacrylamid Gel Electrophoresis

Acrylamid Stocksolution (AA)

  • 40 % Acrylamide 4x cryst.- Mix 37.5:1 (Biomol 54535; stored at 4 °C)

Resolving gel Stocksolution (RG)

Component Amount
Tris-HCl18.2 g
SDS0.4 g

  • Add components to ddH2O, adjust the pH to 8.8 with HCl and bring the volume to 100 mL.
  • Store at 4 °C.

Stacking gel Stocksolution (SG)

Component Amount
Tris-HCl6.1 g
SDS0.4 g

  • Add components to ddH2O, adjust the pH to 6.8 with HCl and bring the volume to 100 mL.
  • Store at 4 °C.

10x running buffer

Component Amount
Tris-HCl30.3 g
Glycine144.1 g
SDS10 g

  • Add components to ddH2O and bring the volume to 1 L. The pH should bea around 8.4.
  • Store at RT.

4x SDS Loading Dye

Component Amount
Tris-HCl0.4 g
SDS1.2 g
Glycerine (87 % w/v)7.5 mL
β-Mercaptoethanol2.5 mL
Bromphenol blue (2%)0.5 mL

  • Add Tris-HCl and SDS to ddH2O and adjust the pH to 6.8.
  • Add the rest of the compnents and bring the volume to 50 mL
  • Store at -20 °C.

Ammoniumpersulfat (APS)

  • 10 % APS (w/v) in ddH2O
  • Store at -20 °C.

Pipetting schemes for one gel

Component Resolving gel 10 % Stacking gel 4 %
AA1 mL0.2 mL
RG1 mL-
SG-0.48 mL
ddH2O2 mL1.32 mL
TEMED3 µL2 µL
APS30 µL15 µL

Component Resolving gel 15 % Stacking gel 4 %
AA1.5 mL0.2 mL
RG1 mL-
SG-0.48 mL
ddH2O1.5 mL1.32 mL
TEMED3 µL2 µL
APS30 µL15 µL

Preperation of SDS-Gels

  • Glass plates, combs and spacers are cleaned with EtOH (70 %) and assembled.
  • The resolving gel solution is prepared with TEMED and APS added last for polymerisation. The solution is poured between the assembled galss plates and covered with isopropanol.
  • After polymerisation, the isopropanol is removed and the stacking gel is prepared and poured on top of the resolving gel. The combs need to be inserted immediatly.
  • After polymerisation, the gels can either be put into the electrophoresis chamber with 1x running buffer or stored at 4 °C in a bag with wet tissue. 

Preperation of samples

  • Samples are mixed with SDS loading dye (4:1), denaturated at 95 °C for 5 min and breifly centrifuged.
  • Up to 15 µL of a sample are loaded into one well.

SDS-PAGE

  • After loading the samples and a protein marker onto the gel, it is run for 15 min with an electric current of 15 mA current (per gel). Afterwards, the gel is run with an electric current of 30 mA (per gel).

Staining with Coomassie-Brilliant-Blue

The following solutions have to be prepared.

Staining solution

Final concentration Component Amount
0.05%Coomassie-Brilliant-Blue R 2500.5 g
25%Isopropanol250 mL
10%Acetic acid100 mL

  • Dissolve the components in ddH2O and bring the volume to 1 L.
  • The solution can be used more than once and is stored at RT.

Fixation solution

  • 10% acetic acid

 

  • Place the SDS-gel in a box with staining solution and heat in the microwave.
  • Incubate the gels on a rocker until protein bands become visible.
  • Wash the gel with water and discolour it in fixation solution for several hours or overnight.
Western Blot

For Western Blot an Anti-His antibody (Anti-His (C-term)/AP) was used.

The following solutions need to be prepared for the procedure.

10x TBS buffer

Final concentration Component Amount
0.1 MTris-HCl (MW 121.14)6.057 g
1.4 MNaCl (MW 58.44)40.91 g

  • Dissolve the components in ddH2O, adjust the pH to 7.4 and bring the volume to 500 mL.
  • Store at RT.

1x Transfer buffer

Final concentration Component Amount
25 mMTris-HCl (MW 121.14)3.029 g
192 mMGlycine (MW 75.07)14.41 g
Methanol200 mL

  • Dissolve the components in ddH2O and bring the volume to 1 L. The pH should be between 8.1 and 8.4.
  • Store at RT.

10x TBS-Tween buffer

Final concentration Component Amount
0.1 MTris-HCl (MW 121.14)6.057 g
1.4 MNaCl (MW 58.44)40.91 g
0.1 %Tween200.5 mL

  • Dissolve the components in ddH2O, adjust the pH to 7.4 and bring the volume to 500 mL.
  • Store at RT.

Blocking Solution

  • Dissolve 2.5 g skim milk in 50 mL 1x TBS buffer.
  • It has to be prepared freshly.

Phosphatase buffer

Final concentration Component Amount
0.1 MTris-HCl (MW 121.14)6.057 g
0.1 MNaCl (MW 58.44)40.91 g
5 mMMgCl2 x 6 H2O (MW 203.3)0.51 g

  • Dissolve the components in ddH2O, adjust the pH to 7.4 and bring the volume to 500 mL.
  • Store at RT.

In preparation for the Western Blot, a SDS-PAGE with a Protein Ladder, which is compatible with Western Blot, has to be run.

  • Prepare 6 gel sized Whatman paper and gel sized blot membrane by soaking them in 1x Transfer buffer.
  • Set up the Western Blot. Place 3 moist Whatman papers on the anode (base of blotter), followed by the moist membrane, the unstained SDS-gel, 3 moist Whatman papers and the cathode (lid of blotter).
  • Blot at 200 mA (1 gel) and constant 10 V for 1 h.
  • Wash the membrane three times for 5 min with 1x TBS buffer on a rocker.
  • Block with 50 mL 1x TBS buffer with 5% skim milk for 1 h or over night on a rocker.
  • Wash three times for 15 min with 1x TBS buffer on a rocker.
  • Incubate with antibody solution (14 mL 1x TBS-Tween buffer + 200 µL 1x TBS buffer/5% skim milk + 7 µL antibody) for 2 h on a rocker.
  • Wash two times shortly with 1x TBS-Tween buffer.
  • Wash once with 1x TBS-Tween buffer for 15 min on a rocker.
  • Wash two times with 1x TBS-Tween buffer for 5 min on a rocker.
  • Wash two times with 1x TBS buffer for 10 min on a rocker.
  • Wash two times shortly in 1x phosphatase buffer.
  • Place the membrane in staining solution (10ml 1x phosphatase buffer + 66µl NBT + 33µl BCIP), stain in the dark until bands become visible.
  • Wash with H2O to stop the reaction.
  • Dry the membrane in Whatman paper and scan it.
Microbial B12 Plate Assay

The B12 Plate Assay allows the detection of corrinoids in cell extracts or supernatants. It is based on the fact, that E. coli DSM 4261 relies on its B12 dependent methionine synthase which is encoded by metH. This is caused by a point mutation in metE which encodes the B12 independent methionine synthase. In a medium without methionine, E. coli DSM 4261 therefore relies on the presence of B12.

Cultivation of E. coli DSM 4261

  • 50 mL of Guttman medium are inoculated with a 5 mL preparatory overnight culture.
  • The cells are harvested at an OD600 of 0.2, washed three times with 20 mL 0.9 % NaCl and afterwards resuspended in the same volume NaCl.

Preparation of samples

  • After harvesting the cells from the induction experiments they are washed with 0.1 M KP-buffer:
Component Amount
K2HPO413.6 g
KH2PO4 · 3 H2O22.8 g

  • Add components to ddH2O, adjust the pH tp 7.0 and bring the volume to 1 L.
  • Periplasm, cytoplasm and crude cell extracts from different expression studies are used as samples.

Assay

  • 7 mL of the cell suspension, 50 mM and 0.2 g/L triphenyltetrazoliumchloride are added to 500 mL of the autoclaved mineral-agar (50 °C).
Component Amount
K2HPO47 g
KH2PO43 g
(NH4)2SO41 g
MgSO4 · 7 H2O0.1 g
Na2citrate · 2 H2O3 g
Agar Bacteriological15 g

  • Add components to ddH2O and bring the volume to 1 L.
  • 4 sterile filter papers (Ø 0.9 cm, Fa. Schleicher & Schuell, Dassel) are laid onto the plates and loaded with 10-15 µL of a sample or a vitamin B12 calibration solution (0, 0.05, 0.25, 0.1, 5.0 μg/ml). Every sample or concentration is analyzed twice.
  • The plates are incubated at 37 °C for 16-24 h.

If the samples contained vitamin B12, the cells grow in a red zone around the filter paper. The size is proportional to the vitamin B12 concentration and the reduction of triphenyltetrazoliumchloride causes the red staining.

  • To analyze the B12 concentration in the samples, the diameter of the red zone is measured and compared to the calibrations.

Contact


iGEM Team Göttingen 2016
Institut für Mikrobiologie
und Genetik
AG Prof. Dr. Rolf Daniel
Grisebachstr. 8
37077 Göttingen

Navigation



Sponsors

sartorius bbraun Macherey-Nagelzymo snapgenegenious_logo gatcroth idtuni-goe gzmbappmibio