Team:Ionis Paris/Demonstrate
As the project ended, our team managed to realize most of its objectives : we are ready to show a functional proof of concept, not only of the biosensor BioBrick, but also of our drone and containment tube. Though some improvements may be brought, such as the guiding system for the drone or the CelloCad optimization for the biosensor, Quantifly is now a real tool able to measure pollution in the outside environment. Due to the iGEM Restrictions concerning biological material taken outside the lab, we were not able to actually perform a mapping, but we tried to simulate as best as possible the external conditions. Our biosensor is the BioBrick we put the most efforts in, in terms of assembly or characterization. We were rewarded in late August when we saw our bioluminescence results for the first time: it appears that not only the BioBrick device works, but that our statement correlating the intensity of light to the amount of pollutant was correct as well. ! We detailed all the characterization process extensively in the Proof of Concept page, accessible through this link. Our drone was built as detailed in the Hardware section. It is flight-ready, and able to carry our bacteria to the sampling area. Though our drone is only a prototype, it can already carry up to 4 containment tubes, allowing four disctinct samplings. The number of tubes is one of the point we plan to improve. As you will see at the iGEM Giant Jamboree, our homemade drone is perfectly safe and functional. In case you want to build your own Quantifly drone or to improve our model, you can download all of the 3D models by clicking on this link. The built drone The containment tubes were 3D printed and assembled successfully. We were not able to perform any sampling using the tube due to a lack of technical means. However, we managed to mount the tube on our drone, and to create a system allowing the opening and closing of the tube mid-flight. Just as for the drone, the 3D models we used to print our containment tube are available by clicking on this link. Our tube (Up: disassembled, middle: sampling, Down: sealed) Our tube included in the drone chassisIntroduction
As we cannot spray a cloud of pollutants in the lab and fly through it, for quite obvious reasons, we decided to take a deconstructed approach. We assumed that we would make the elements of our project work one by one in simulated conditions, before putting them altogether. We stated that, if the biosensor, the containment tube and the drone are working, the whole project would be functional as well.Our Biosensor
The Drone
The containment tube
