Difference between revisions of "Team:ETH Zurich/Model"

Line 67: Line 67:
 
                 <p>Due to the complexity of our system, an intuitive design would not be sufficient. Several components must be tuned specifically for our application, and the correct functioning of the candidate designs is not obvious. We developed a hybrid deterministic-stochastic model of our system covering the mechanics of the components we use. The main goals include a model-aided design of the system, tuning of the system components for our application and prediction of the system behavior.</p>
 
                 <p>Due to the complexity of our system, an intuitive design would not be sufficient. Several components must be tuned specifically for our application, and the correct functioning of the candidate designs is not obvious. We developed a hybrid deterministic-stochastic model of our system covering the mechanics of the components we use. The main goals include a model-aided design of the system, tuning of the system components for our application and prediction of the system behavior.</p>
 
                 <p>The stochastic approach of our model allows us to exploit the intrinsic noise at our advantage: our model describes the <it>distribution</it> of the population's behavior, which is much more informative than the average of the observed population, because we can thus interpret quantitative outputs of the system with greater accuracy.</p>
 
                 <p>The stochastic approach of our model allows us to exploit the intrinsic noise at our advantage: our model describes the <it>distribution</it> of the population's behavior, which is much more informative than the average of the observed population, because we can thus interpret quantitative outputs of the system with greater accuracy.</p>
−
                 <p>The model matches the modular sructure of the system, making it easier to exchange components and test their behavior in the full system. Thanks to this feature we were able to quickly test alternative parts like the lactate sensor and the CRISPR switch.</p>
+
                 <p>The model matches the modular sructure of the system, making it easier to exchange components and test their behavior when combined to the full system. Thanks to this feature we were able to quickly test alternative parts like the lactate sensor and the CRISPR switch.</p>
 
                 <p>The parameters of the model are strictly based on literature or experimental characterization of the single components. To estimate the parameters from flow cytometry data, we used INSIGHT, a recent method based on <i>Approximate Bayesian Computation</i> (ABC).<sup><a href="#cit1" class="cit">1</a></sup></p>
 
                 <p>The parameters of the model are strictly based on literature or experimental characterization of the single components. To estimate the parameters from flow cytometry data, we used INSIGHT, a recent method based on <i>Approximate Bayesian Computation</i> (ABC).<sup><a href="#cit1" class="cit">1</a></sup></p>
 
             </div>
 
             </div>
Line 93: Line 93:
 
                     <h3>DESIGN INSIGHTS</h3>
 
                     <h3>DESIGN INSIGHTS</h3>
 
                     <ul>
 
                     <ul>
−
                         <li>Assist in designing the system by comparing the qualitative behavior of different design alternatives.</li>
+
                         <li>Assist in designing the system by comparing the behavior of different design alternatives.</li>
 
                         <li>Tune the system for the desired time scale and concentration ranges.</li>
 
                         <li>Tune the system for the desired time scale and concentration ranges.</li>
 
                     </ul>
 
                     </ul>
Line 110: Line 110:
 
                 <h2>RESULTS</h2>
 
                 <h2>RESULTS</h2>
 
                 <h3>DESIGN INSIGHTS</h3>
 
                 <h3>DESIGN INSIGHTS</h3>
−
                 <p>We started with exploratory simulations of the system during the early design phase and managed to get early insights on the behavior of our system. These insights helped us to plan the biological implementation of the circuit, in particular, the model advised us on the design of the reporter system (add link to the page where you show it), the position of the integrase gene (add link) and the choice of plasmid ORIs (add link).</p>
+
                 <p>We started with exploratory simulations during the design phase and managed to get early insights on the behavior of our system. This helped us in the biological implementation of our system, in particular, the model advised us on the design of the reporter system (add link to the page where you prove this statement), the position of the integrase gene (add link to prove) and the choice of plasmid ORIs (add link to prove).</p>
−
                 <p>Moreover we were able to identify potential problems (like leakiness and sensitivity) and predict their influence on the final system. We designed and constructed the system under awareness of those critical points.</p>
+
                 <p>Moreover we were able to identify potential problems (like leakiness and sensitivity) and predict their influence on the final system. Taking this critical parameters into account, we tried to design and to construct our system such that it works within the required parameter ranges, e.g. low leakiness (add link) and certain ratio between integrase translation and degradation rates (add link).</p>
 
<div>  
 
<div>  
 
                 <div class="image_box full_size">
 
                 <div class="image_box full_size">
Line 117: Line 117:
 
<img src="https://static.igem.org/mediawiki/2016/d/d8/T--ETH_Zurich--fullsystDetermSimul.svg">
 
<img src="https://static.igem.org/mediawiki/2016/d/d8/T--ETH_Zurich--fullsystDetermSimul.svg">
 
</a>
 
</a>
−
<p><b>Figure 2:</b>Full system Simulation</p>
+
<p><b>Figure 2:</b> Simulation of the full system. After exposure to NO and AHL for xxx hours, the system..... </p>
 
</div>
 
</div>
 
</div>
 
</div>
Line 133: Line 133:
 
<img src="https://static.igem.org/mediawiki/2016/8/88/T--ETH_Zurich--heatmapFullSystem1h.svg">
 
<img src="https://static.igem.org/mediawiki/2016/8/88/T--ETH_Zurich--heatmapFullSystem1h.svg">
 
</a>
 
</a>
−
<p><b>Figure 10:</b>Full system HeatMap 1h</p>
+
<p><b>Figure 10:</b> Heatmap of the full system at time = 1 h: </p>
 
</div>
 
</div>
 
</div>
 
</div>

Revision as of 22:45, 18 October 2016

PAVLOV'S COLI

MODEL

OVERVIEW

Figure 1: Schematic view of the model structure. Each module represents a circuit element.

INTRODUCTION

Due to the complexity of our system, an intuitive design would not be sufficient. Several components must be tuned specifically for our application, and the correct functioning of the candidate designs is not obvious. We developed a hybrid deterministic-stochastic model of our system covering the mechanics of the components we use. The main goals include a model-aided design of the system, tuning of the system components for our application and prediction of the system behavior.

The stochastic approach of our model allows us to exploit the intrinsic noise at our advantage: our model describes the distribution of the population's behavior, which is much more informative than the average of the observed population, because we can thus interpret quantitative outputs of the system with greater accuracy.

The model matches the modular sructure of the system, making it easier to exchange components and test their behavior when combined to the full system. Thanks to this feature we were able to quickly test alternative parts like the lactate sensor and the CRISPR switch.

The parameters of the model are strictly based on literature or experimental characterization of the single components. To estimate the parameters from flow cytometry data, we used INSIGHT, a recent method based on Approximate Bayesian Computation (ABC).1

GOALS

PROOF OF CONCEPT

  • Identify parameter ranges at which the system shows the desired behavior.
  • Predict qualitatively the response of the system to different inputs.

DESIGN INSIGHTS

  • Assist in designing the system by comparing the behavior of different design alternatives.
  • Tune the system for the desired time scale and concentration ranges.

UNRAVELLING INTEGRASE KINETICS

  • Coming soon ...

RESULTS

DESIGN INSIGHTS

We started with exploratory simulations during the design phase and managed to get early insights on the behavior of our system. This helped us in the biological implementation of our system, in particular, the model advised us on the design of the reporter system (add link to the page where you prove this statement), the position of the integrase gene (add link to prove) and the choice of plasmid ORIs (add link to prove).

Moreover we were able to identify potential problems (like leakiness and sensitivity) and predict their influence on the final system. Taking this critical parameters into account, we tried to design and to construct our system such that it works within the required parameter ranges, e.g. low leakiness (add link) and certain ratio between integrase translation and degradation rates (add link).

Figure 2: Simulation of the full system. After exposure to NO and AHL for xxx hours, the system.....

Figure 10: Heatmap of the full system at time = 1 h:

Figure 10:Full System HeatMap 2h

Figure 3:Full system HeatMap 4h

SYSTEM TUNING

Since our application targets specific time and concentration ranges we used the model to tune the components of the system. The sensor module was tuned for the relevant concentrations of quorum sensing molecule and the switch kinetics were adapted for the expected time scale of the measurements.

SYSTEM SIMULATION

After the characterization of the single components we were able to simulate the full system and validate its behavior. This allowed us to model the recorded signal as function of the measured fluorescence distribution, which is a critical operation during actual investigation. The stochastic nature of our model allows us to obtain additional information by taking advantage of the population effect.

REFERENCES

  • [1] Lillacci, Gabriele, and Mustafa Khammash. "The signal within the noise: efficient inference of stochastic gene regulation models using fluorescence histograms and stochastic simulations." Bioinformatics 29.18 (2013): 2311-2319.

Thanks to the sponsors that supported our project: