Difference between revisions of "Team:Tianjin/Protocol"

Latest revision as of 15:10, 19 October 2016

TEAM TIANJIN

Team Tianjin-Attribution

General Protocols

1.Plasmid Extraction

We use the TIANprep Mini Plasmid Kit made by TIANGEN Biotech Co.,Ltd. to extract plasmid. Here is the protocol.
Add ethanol (96-100%) to Buffer PW before use, check bottle tag for the adding volume.
1. Column equilibration: Place a Spin Column CP3 in a clean collection tube, and add 500 μl Buffer BL to CP3. Centrifuge for 1 min at 12,000 rpm (~13,400 × g) in a table-top microcentrifuge. Discard the flow-through, and put the Spin Column CP3 back into the collection tube. (Please use freshly treated spin column).
2. Harvest 1-5 ml bacterial cells in a microcentrifuge tube by centrifugation at 12,000 rpm (~13,400 × g) in a conventional, table-top microcentrifuge for 1 min at room temperature (15-25°C), then remove all traces of supernatant by inverting the open centrifuge tube until all medium has been drained (For large volume of bacterial cells, please harvest to one tube by several centrifugation step.)
3. Re-suspend the bacterial pellet in 250 μl Buffer P1 (Ensure that RNase A has been added). The bacteria should be resuspended completely by vortex or pipetting up and down until no cell clumps remain.
Note: No cell clumps should be visible after resuspension ofthe pellet, otherwise incomplete lysis will lower yield and purity. 4. Add 250 μl Buffer P2 and mix gently and thoroughly by inverting the tube 6-8 times.
Note: Mix gently by inverting the tube. Do not vortex, as this will result in shearing of genomic DNA. If necessary, continue inverting the tube until the solution becomes viscous and slightly clear. Do not allow the lysis reaction to proceed for more than 5 min. If the lysate is still not clear, please reduce bacterial pellet.
5. Add 350 μl Buffer P3 and mix immediately and gently by inverting the tube 6-8 times. The solution should become cloudy. Centrifuge for 10 min at 12,000 rpm (~13,400 × g) in a table-top microcentrifuge.
Note: To avoid localized precipitation, mix the solution thoroughly, immediately after addition of Buffer P3. If there is still white precipitation in the supernatant, please centrifuge again.
6. Transfer the supernatant from step 5 to the Spin Column CP3 (place CP3 in a collection tube) by decanting or pipetting. Centrifuge for 30-60 s at 12,000 rpm (~13,400 × g). Discard the flow-through and set the Spin Column CP3 back into the Collection Tube.
7. (Optional, actually we hardly ever use) Wash the Spin Column CP3 by adding 500 μl Buffer PD and centrifuge for 30-60 s at 12,000 rpm (~13,400 × g). Discard the flow-through and put Spin Column CP3 back to the collection tube.
This step is recommended to remove trace nuclease activity when using endA+ strains such as the JM series, HB101 and its derivatives, or any wild-type strain, which have high levels of nuclease activity or high carbohydrate content.
8. Wash the Spin Column CP3 by adding 600 μl Buffer PW (ensure that ethanol (96%-100%) has been added) and centrifuge for 30-60 s at 12,000 rpm (~13,400 × g). Discard the flow-through, and put the Spin Colum CP3 back into the Collection Tube.
9. Repeat Step 8.
10. Centrifuge for an additional 2 min at 12,000 rpm (~13,400 × g) to remove residual wash Buffer PW.
Note: Residual ethanol from Buffer PW may inhibit subsequent enzymatic reactions. We suggest open CP3 lid and stay at room temperature for a while to get rid of residual ethanol.
11. Place the Spin Column CP3 in a clean 1.5 ml microcentrifuge tube. To elute DNA, add 50-100 μl Buffer EB to the center of the Spin Column CP3, incubate for 2 min, and centrifuge for 2 min at 12,000 rpm (~13,400 × g).
Note: If the volume of eluted buffer is less than 50 μl, it may affect recovery efficiency. The pH value of eluted buffer will have some influence in eluting; Buffer EB or distilled water (pH 7.0-8.5) is suggested to elute plasmid DNA. For long-term storage of DNA, eluting in Buffer EB and storing at -20°C is recommended, since DNA stored in water is subject to acid hydrolysis. Repeat step 11 to increase plasmid recovery efficiency.

2.DNA Purification

We use the TIANquick Midi Purification Kit made by TIANGEN Biotech Co.,Ltd. to purify the DNA products of PCR and restriction endonuclease cutting. Here is the protocol.
Add ethanol (96-100%) to Buffer PW before use (see bottle label for volume).
1. Column equilibration: add 500 μl Buffer BL to the Spin Column CB2 (put Spin Column CB2 into a collection tube). Centrifuge for 1 min at 12,000 rpm (~13,400 × g). Discard the flow-through, and then place Spin Column CB2 back into the collection tube (please use freshly treated spin column).
2. Add 5 volumes of Buffer PB to 1 volume of the PCR reaction or enzymatic reaction and mix. It is not necessary to remove mineral oil or kerosene.
Note: For example, add 250 μl Buffer PB to 50 μl PCR reaction (not including oil).
3. Transfer the mixture to the Spin Column CB2, incubate at room temperature (15-25°C) for 2 min. Centrifuge for 30-60 s at 12,000 rpm (~13,400 × g) in a table-top microcentrifuge. Discard the flow-through, and then place Spin Column CB2 back into the same collection tube.
Note: The maximum loading volume of the column is 800 μl. For sample volumes greater than 800 μl simply load again.
4. Add 600 μl Buffer PW (ensure that ethanol (96-100%) has been added) to the Spin Column CB2 and centrifuge for 30-60 s at 12,000 rpm (~13,400 × g). Discard the flow-through, and place Spin Column CB2 back in the same collection tube.
Note: If the purified DNA is used for the subsequent salt sensitive experiments, such as ligation or sequencing experiment, it is suggested to stand for 2-5 min after adding Buffer PW, and then centrifuge.
5. Repeat step 4.
6. Centrifuge at 12,000 rpm (~13,400 × g) for 2 min to remove residual Buffer PW. Discard the flow-through, and allow the column to air dry with the cap open for several minutes to dry the membrane.
Note: Residual ethanol from Buffer PW may inhibit subsequent experiment (enzymatic or PCR reactions).
7. Place the Spin Column CB2 in a clean 1.5 ml microcentrifuge tube. Add 30-50 μl Buffer EB to the center of membrane, incubate for 2 min, and centrifuge for 2 min at 12,000 rpm (~13,400 × g).
Note: If the volume of eluted buffer is less than 30 μl, it may affect recovery efficiency. The pH value of eluted buffer will have big influence in eluting; distilled water (pH 7.0-8.5, adjusted with NaOH) is suggested to elute plasmid DNA, pH<7.0 will decrease elution efficiency. For long-term storage of DNA, eluting in Buffer EB and storing at -20°C is recommended, since DNA stored in water is subject to acid hydrolysis. Repeat step 7 to increase plasmid recovery efficiency.

@@ Line 1: / Line 1: @@
 {{:Team:Tianjin/Templates/MaterialTheme|}}
-{{:Team:Tianjin/Templates/AddCSS|:Team:Tianjin/Note/R-R/camarts.css}}
+{{:Team:Tianjin/Templates/AddCSS|:Team:Tianjin/Protocol/camarts.css}}
-{{:Team:Tianjin/Templates/AddCSS|:Team:Tianjin/Experiment/css/font.css}}
 <html lang="en">
+<style>
+#Notes{
+  color: inherit;
+  background-color: rgba(255, 255, 255, 0.1);
+}
+</style>
 <head>
 	<meta charset="utf-8" />
@@ Line 14: / Line 21: @@
 <!------------------------------------------- This part should be dismissed in WIKI u
      <style type="text/css">
@@ Line 23: / Line 34: @@
 		</style>
 </head>
@@ Line 51: / Line 63: @@
      <header id="main-header" role="banner">
+  <style>
+.note-content li,.note-content2 li,.note-content3 li,.note-content4 li,.note-content5 li,.note-content6 li,.note-content7 li,.note-content8 li,.note-content9 li,.note-content10 li,.note-content11 li,.note-content12 li,.note-content13 li,.note-content14 li,.note-content15 li,.note-content16 li,.note-content17 li,.note-content18 li,.note-content19 li,.note-content20 li,.note-content21 li,.note-content22 li,.note-content23 li,.note-content24 li,.note-content25 li,.note-content26 li,.note-content27 li,.note-content28 li,.note-content29 li,.note-content30 li.note-content,.note-content,.note-content2,.note-content3,.note-content4,.note-content5 ,.note-content6,.note-content7,.note-content8,.note-content9,.note-content10,.note-content11,.note-content12,.note-content13,.note-content14,.note-content15,.note-content16,.note-content17,.note-content18,.note-content19,.note-content20,.note-content21,.note-content22,.note-content23,.note-content24,.note-content25,.note-content26,.note-content27,.note-content28,.note-content29,.note-content30{
+font-family:Arial;
+font-size:18px;
+text-align:justify;
+}
+</style>
@@ Line 63: / Line 81: @@
 <article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
 	<header class="entry-header">
-		<div class="entry-title" align="center" >General Protocols</div>
+		<div class="entry-title" align="center" style="font-size:42px;margin-top:30px" >General Protocols</div>
 	</header><!-- .entry-header -->
          <h2 class="entry-title">1.Plasmid Extraction</h2>
 		<div class="entry-content">
                    <div class="note-content">
 We use the<b> TIANprep Mini Plasmid Kit </b>made by <b>TIANGEN Biotech Co.,Ltd.</b> to extract plasmid. Here is the protocol.<br/>
 Add <b>ethanol (96-100%)</b> to Buffer <b>PW </b>before use, check bottle tag for the adding volume.<br/>
@@ Line 81: / Line 99: @@
 . Transfer the supernatant from step 5 to the Spin Column <b>CP3</b> (place <b>CP3 </b>in a collection tube) by decanting or pipetting. Centrifuge for <b>30-60 s </b>at <b>12,000 rpm (~13,400 × g)</b>. Discard the flow-through and set the Spin Column <b>CP3 </b>back into the Collection Tube.<br/>
 . (Optional, actually we hardly ever use) Wash the Spin Column <b>CP3 </b>by adding <b>500 μl</b> Buffer <b>PD </b>and centrifuge for <b>30-60 s</b> at <b>12,000 rpm (~13,400 × g)</b>. Discard the flow-through and put Spin Column <b>CP3 </b>back to the collection tube.<br/>
-This step is recommended to remove trace nuclease activity when using <b>endA+</b> strains such as the<b> JM series</b>, <b>HB101</b> and its derivatives, or any wild-type strain, which have high levels of nuclease activity or high carbohydrate content.<br/>
+This step is recommended to remove trace nuclease activity when using <b><i>endA+</i></b> strains such as the<b><i> JM series</i></b>, <b><i>HB101</i></b> and its derivatives, or any wild-type strain, which have high levels of nuclease activity or high carbohydrate content.<br/>
 . Wash the Spin Column <b>CP3 </b>by adding <b>600 μl</b> Buffer <b>PW</b> (ensure that <b>ethanol (96%-100%)</b> has been added) and centrifuge for <b>30-60 s </b>at <b>12,000 rpm (~13,400 × g)</b>. Discard the flow-through, and put the Spin Colum<b> CP3</b> back into the Collection Tube.<br/>
 . Repeat Step 8.<br/>
@@ Line 88: / Line 106: @@
 . Place the Spin Column <b>CP3 </b>in a clean <b>1.5 ml </b>microcentrifuge tube. To elute DNA, add <b>50-100 μl</b> Buffer <b>EB </b>to the center of the Spin Column <b>CP3</b>, incubate for <b>2 min</b>, and centrifuge for <b>2 min</b> at <b>12,000 rpm (~13,400 × g)</b>.<br/>
 Note: If the volume of eluted buffer is less than <b>50 μl</b>, it may affect recovery efficiency. The pH value of eluted buffer will have some influence in eluting; Buffer <b>EB</b> or distilled water (<b>pH 7.0-8.5</b>) is suggested to elute plasmid DNA. For long-term storage of DNA, eluting in Buffer<b> EB</b> and storing at<b> -20°C</b> is recommended, since DNA stored in water is subject to acid hydrolysis. Repeat step 11 to increase plasmid recovery efficiency.
 </div>
 <a class="expand-btn">Show More</a>
@@ Line 166: / Line 185: @@
 Note: Residual ethanol from Buffer <b>PW</b> will influence the subsequent enzymatic reaction (enzyme digestion, PCR etc). <br/>
 . Transfer the Spin Column<b> CA2</b> to a clean <b>1.5 ml</b> microcentrifuge tube. Add appropriate volume of Buffer<b> EB </b>to the center of the membrane, incubate at room temperature (<b>15-25°C</b>) for <b>2 min</b>, then centrifuge at <b>12,000 rpm (~13,400 × g)</b> for <b>2 min</b>. <br/>
-Note: The elution volume should not be less than <b>30 μl</b> since smaller volume will affect recovery efficiency. The pH value of eluted buffer will affect eluting. If purified DNA is used for sequencing, it is recommended to choose ddH2O (<b>pH 7.0-8.5</b>) to elute DNA,    <b>pH<7.0</b> will decrease the elution efficiency. Obtained DNA should be stored at<b> -20°C</b> to prevent degradation. Buffer (<b>10 mM Tris-Cl, pH 8.0</b>) could also be used for DNA elution. For higher yield, pipette the eluate to the center of the membrane again, incubate <b>2 min</b> and centrifuge at <b>12,000 rpm (~13,400 × g)</b> for <b>2 min</b>.
+Note: The elution volume should not be less than <b>30 μl</b> since smaller volume will affect recovery efficiency. The pH value of eluted buffer will affect eluting. If purified DNA is used for sequencing, it is recommended to choose ddH<sub>2</sub>O (<b>pH 7.0-8.5</b>) to elute DNA,    <b>pH<7.0</b> will decrease the elution efficiency. Obtained DNA should be stored at<b> -20°C</b> to prevent degradation. Buffer (<b>10 mM Tris-Cl, pH 8.0</b>) could also be used for DNA elution. For higher yield, pipette the eluate to the center of the membrane again, incubate <b>2 min</b> and centrifuge at <b>12,000 rpm (~13,400 × g)</b> for <b>2 min</b>.
 </div>
@@ Line 193: / Line 212: @@
 <div class="note-content4">
-. Preparation of <b>TAE buffer</b>: Add <b>242g Tris, 37.2g Na2EDTA·2H2O, 800mL ddH2O</b>, after all the solute dissolve, add <b>57.1mL acetic acid </b>and add <b>ddH2O</b> to make the total volume <b>1L</b>.<br/>
+. Preparation of <b>TAE buffer</b>: Add <b>242g Tris, 37.2g Na2EDTA·2H2O, 800mL ddH<sub>2</sub>O</b>, after all the solute dissolve, add <b>57.1mL acetic acid </b>and add <b>ddH<sub>2</sub>O</b> to make the total volume <b>1L</b>.<br/>
 . Preparation of sample: Add <b>DNA loading buffer</b> to the DNA solution according to the dilution ratio of particular buffer.<br/>
 . Preparation of agarose gel: Add <b>agarose powder 10g/L, 1×TAE buffer 100mL </b>(variable, according to need), heat the mixture by microwave oven until the agarose was dissolved. After the solution cool down to touchable temperature, add <b>50-100μL/L Goldenview Nucleic acid dye</b> to the solution. Then pour the solution to the gel mould with gel comb inserted and wait for its concretion.<br/>
@@ Line 227: / Line 246: @@
 <li>10×Cut Smart Buffer:<b> 5μL</b></li>
 <li>DNA to be cut: <b>30μL</b></li>
-<li>ddH2O:<b> 13μL</b></li>
+<li>ddH<sub>2</sub>O:<b> 13μL</b></li>
 <br/>
 <li>Reaction time: <b>2h</b></li>
@@ Line 265: / Line 284: @@
 <li>5×Ligase Buffer:<b> 4μL</b></li>
 <li>DNA to be linked: <b>(c1V1/L1): (c2V2/L2)=5:1</b>. (c1: Concentration of cut DNA fragments; c2: Concentration of cut plasmid; V1: Volume of cut DNA fragments; V2: Volume of cut plasmid; L1: Length of cut DNA fragments; L2: Length of cut plasmid)</li>
-<li>ddH2O: add to make the total volume <b>20μL</b></li>
+<li>ddH<sub>2</sub>O: add to make the total volume <b>20μL</b></li>
 <br/>
 <li>Reaction time:<b> 2h</b></li>
@@ Line 296: / Line 315: @@
 <li>Template: <b>1μL</b></li>
 <li>dNTP:<b> 1μL</b></li>
-<li>Primer: Sense Primer and Anti-sense Primer, respectively <b>2.5μL</b></li>
+<li>Primers: Sense Primer and Anti-sense Primer, respectively <b>2.5μL</b></li>
-<li>ddH2O: <b>32.5μL</b></li>
+<li>ddH<sub>2</sub>O: <b>32.5μL</b></li>
 <br/>
 <li>Cycles: <b>25-35</b></li>
@@ Line 336: / Line 355: @@
 <li>Total volume: <b>20μL</b></li>
 <li>Colony PCR System: 2×Taq Master Mix (Dye added) <b>10μL</b></li>
-<li>ddH2O: <b>10μL</b></li>
+<li>Primers: Sense Primer and Anti-sense Primer, respectively <b>1μL</b></li>
+<li>ddH<sub>2</sub>O: <b>8μL</b></li>
 <li>select single colony with stick and immerse the stick into the system for <b>1 min</b>. Preparing the bacterial liquid and then add 1μL of it is also feasible.
 </li><br/>
@@ Line 350: / Line 370: @@
 Prepare the system:
 <li>Total volume: <b>50μL</b></li>
-<li>ddH2O: <b>50μL</b></li>
+<li>ddH<sub>2</sub>O: <b>50μL</b></li>
 <li>select single colony with stick and immerse the stick into the system for <b>1 min</b>
 </li><br/>
@@ Line 376: / Line 396: @@
 <div class="note-content9">
-. Mix 50μL competent E.coli cell with 10μL plasmids, and place them in ice bath for 30 min.
+. Mix <b>50μL</b> competent <i>E.coli</i> cell with <b>10μL</b> plasmids, and place them in ice bath for <b>30 min</b>.<br/>
-. Heat shock at 42℃ for 30 s.
+. Heat shock at <b>42℃</b> for <b>30 s</b>.<br/>
-. Put the system back on ice for 2 min.
+. Put the system back on ice for <b>2 min</b>.<br/>
-. Add 500 μl of LB without antibiotics and incubate at 37 ℃ for 30-60 min with the shaking speed of 200rpm.
+. Add <b>500 μl</b> of LB without antibiotics and incubate at <b>37 ℃</b> for <b>30-60 min</b> with the shaking speed of <b>200rpm</b>.<br/>
-. Centrifuge the culture medium at 4000 rpm for 3min.
+. Centrifuge the culture medium at <b>4000 rpm</b> for <b>3min</b>.<br/>
 . Discard the supernatant and resuspend the sediment, use this resuspending liquid to spread the plate with antibiotics.
@@ Line 390: / Line 410: @@
 		</div><!-- .entry-content -->
 <br/><br/>
-<div class="entry-title" align="center" >Protocols for Microbial Consortia</div>
+<div class="entry-title" align="center" style="font-size:42px">Protocols for Microbial Consortia</div>
 <article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
 	<header class="entry-header">
-		<h2 class="entry-title">1.Culture Medium of E.coli-Sc Microbial consortia</h2>
+		<h2 class="entry-title">1.16s-DNA </h2>
 	</header><!-- .entry-header -->
 		<div class="entry-content">
-<div class="note-content10">
+<div class="note-content11">
-<li>13.3 g/L      KH2PO4</li>
+Prepare the system:
-<li>4 g/L        (NH4)2HPO4 </li>
+<li>Total volume: <b>20μL</b></li>
-<li>1.7 g/L       citric acid </li>
+<li>Colony PCR System: 2×Taq Master Mix (Dye added) <b>10μL</b></li>
-<li>0.0084 g/L    EDTA </li>
+<li>ddH<sub>2</sub>O: <b>8.2μL</b></li>
-<li>0.0025 g/L    CoCl2</li>
+<li>primer: <b>0.4μL </b> each</li>
-<li>0.015 g/L     MnCl2 </li>
+<li>bacteria liquid:<b>1μL</b></li>
-<li>0.0015 g/L    CuCl2</li>
+<li>The primer could copy the special 16s-DNA from this kind of bacteria.</li>
-<li>0.003 g/L     H3BO3</li>
+<li>The bacteria liquid is pretreatment. </li>
-<li>0.0025 g/L    Na2MoO4</li>
+<br/>
-<li>0.008 g/L     Zn(CH3COO)2) </li>
+<li>Cycles:<b> 25-35</b></li>
-<li>0.06 g/L      Fe(III) citrate </li>
+<li>Pre-denaturation: <b>94℃,2min</b></li>
-<li>0.0045 g/L    thiamine</li>
+<li>Denaturation: <b>94℃,30s</b></li>
-<li>1.3 g/L       MgSO4 </li>
+<li>Annealing: Depend on the primers, generally <b>45-65℃,20-60s</b></li>
-<li>40 g/L        glucose </li>
+<li>Extension: <b>72℃</b>, depend on the length of amplified fragment, generally <b>20-60s</b></li>
-<li>5 g/L         yeast extract</li>
+<li>Fully extension: <b>72℃,4min</b></li>
-<li>20 g/L        xylose</li>
+<li>Product Storage:<b> 4℃</b></li>
   </div>
-<a class="expand-btn10">Show More</a>
+<a class="expand-btn11">Show More</a>
 		</div><!-- .entry-content -->
@@ Line 429: / Line 453: @@
 <article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
 	<header class="entry-header">
-		<h2 class="entry-title">2.16s-DNA </h2>
+		<h2 class="entry-title">2. Preparation of W medium </h2>
 	</header><!-- .entry-header -->
 		<div class="entry-content">
-<div class="note-content11">
+<div class="note-content15">
+Initial medium
+<b><li>KH<sub>2</sub>PO<sub>4</sub>:	1.7 g/L</li>
+<li>Na<sub>2</sub>HPO<sub>4</sub>:	9.8 g/L</li>
+<li>(NH<sub>4</sub>)<sub>2</sub>SO<sub>4</sub>:	1.0 g/L</li>
+<li>MgSO<sub>4</sub>·7H<sub>2</sub>O:	0.1 g/L</li>
+<li>FeSO<sub>4</sub>·7H<sub>2</sub>O:	0.95 mg/L</li>
+<li>MgO:	10.75 mg/L</li>
+<li>CaCO<sub>3</sub>:	2.0 mg/L</li>
+<li>ZnSO<sub>4</sub>·7H<sub>2</sub>O:	1.44 mg/L</li>
+<li>CuSO<sub>4</sub>·5H<sub>2</sub>O:	0.25 mg/L</li>
+<li>CoSO<sub>4</sub>·7H<sub>2</sub>O:	0.25 mg/L</li>
+<li>H<sub>3</sub>BO<sub>3</sub>:	0.06 mg/L</li>
+<li>HCl:	51.3ml/L</li></b>
+<br/>
+We modify initial formula for convenience, and modified formula is shown as following table:
+<b><li>KH<sub>2</sub>PO<sub>4</sub>:	1.7 g/L</li>
+<li>Na<sub>2</sub>HPO<sub>4</sub>:	9.8 g/L</li>
+<li>(NH<sub>4</sub>)<sub>2</sub>SO4:	1.0 g/L</li>
+<li>NH<sub>4</sub>Cl:	0.865 g/L</li>
+<li>MgSO<sub>4</sub>·7H<sub>2</sub>O:	0.1 g/L</li>
+<li>MgCl<sub>2</sub>:	0.025 g/L</li>
+<li>Mother solution:	1 ml/L</li></b>
+<br/>
+Formula of mother solution
+<b><li>FeSO<sub>4</sub>·7H<sub>2</sub>O:	0.95 g/L</li>
+<li>CoCl<sub>2</sub>·6H<sub>2</sub>O:	0.236 g/L</li>
+<li>CaCl<sub>2</sub>:	2.22 g/L</li>
+<li>ZnSO<sub>4</sub>·7H<sub>2</sub>O:	1.44 g/L</li>
+<li>CuSO<sub>4</sub>:	0.16 g/L</li>
+<li>H<sub>3</sub>BO<sub>3</sub>:	0.06 g/L</li></b>
+ </div>
+<a class="expand-btn15">Show More</a>
+		</div><!-- .entry-content -->
+<div class="entry-title" align="center" style="font-size:42px">Protocols for Protein Engineering</div>
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">1.Preparation of the optimized yeast culture medium </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content23">
+<b><li>Glucose:22g/L</li>
+<li>Yeast Nitrogen Base:6.7g/L</li>
+<li>Dispense mixture:1.224g/L</li>
+<li>Agar:15g/L</li>
+<li>His/Trp/Leu mixed solution:10ml/L</li></b>
+ </div>
+<a class="expand-btn23">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">2.pNPA assay</h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content24">
+A Buffer
+<b><li>Glycerol:400μl</li>
+ <li> Gal:1000μl</li>
+ <li>SC-Ura:3600μl</li></b>
+B Buffer:
+<b><li>10mM pNPA Buffer:50μl</li>
+ <li> PBS(pH=7.4):98μl</li></b>
+ </div>
+<a class="expand-btn24">Show More</a>
+		</div><!-- .entry-content -->
+<div class="entry-title" align="center" style="font-size:42px">Protocols for Cell-Free Protein Synthesis</div>
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">1.Cell-free protein synthesis system(50 µL) </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content12">
+<li>ddH<sub>2</sub>O:<b>7.9µL</b></li>
+<li>Feeding buffer :   <b>25µL</b></li>
+<li>Mg<sup>2+</sup> solution  :  <b>1.1µL</b></li>
+<li>Gene( plasmid as template) :<b> 1µL</b></li>
+<li>Lysate   :  <b>15µL</b></li>
+ </div>
+<a class="expand-btn12">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">2.Preparation of pNPA degradation reaction system </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content13">
+Substrate: <b>0.2mM pNPA </b>water solution (<b>0.0362g pNPA </b>dissolving in ddH<sub>2</sub>O)<br/>
+Reaction system: <b>10 times</b> diluted Enzyme solution(unpurified) mixed with the equal volume substrate. (<b>pH=7</b>)<br/>
+After static reaction at <b>39℃ </b>for <b>8 hours</b>, we detected the characteristic adsorption peak of the product ,pNP, which has no other characteristic adsorption peak except in <b>400nm</b>.
+ </div>
+<a class="expand-btn13">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">3.Preparation of PET degradation reaction system </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content14">
+Reaction system: PET was put into <b>20 times </b>diluted Enzyme solution(unpurified).(<b>pH=7</b>)<br/>
+After static reaction at <b>39℃</b> for <b>2 days</b>, we detected the characteristic adsorption peak of the product ,MHET, which has no other characteristic adsorption peak except in <b>260nm</b>. And detect it every other day in the future 3-4 days.
+ </div>
+<a class="expand-btn14">Show More</a>
+		</div><!-- .entry-content -->
+<div class="entry-title" align="center" style="font-size:42px">Protocols for Cyanobacteria</div>
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">1.Restriction Endonuclease Cutting and Dephosphorylation </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content16">
 Prepare the system:
-<li>Total volume: 20μL</li>
+<li>Total volume: <b>100μL</b></li>
-<li>Colony PCR System: 2×Taq Master Mix (Dye added) 10μL</li>
+<li>Restriction endonuclease :<b> 3μL respectively</b></li>
-<li>ddH2O: 8.2μL</li>
+<li>10×fastdigest Buffer:<b> 10μL</b></li>
-<li>primer: 0.4μL  each</li>
+<li>Plasmids to be cut: <b>2μg</b></li>
-<li>bacteria liquid:1μL</li>
+<li>ddH<sub>2</sub>O: add to make the total volume <b>100μL</b></li>
-<li>The primer could copy the special 16s-DNA from this kind of bacteria.</li>
-<li>The bacteria liquid is pretreatment. </li>
 <br/>
-<li>Cycles: 25-35</li>
+<li>fast AP: add when reacting for <b>1.5h</b></li>
-<li>Pre-denaturation: 94℃,2min</li>
+<li>Total reaction time: <b>2h</b></li>
-<li>Denaturation: 94℃,30s</li>
+<li>Reaction temperature:<b> 37℃</b></li>
-<li>Annealing: Depend on the primers, generally 45-65℃,20-60s</li>
-<li>Extension: 72℃, depend on the length of amplified fragment, generally 20-60s</li>
-<li>Fully extension: 72℃,4min</li>
-<li>Product Storage: 4℃</li>
+ </div>
+<a class="expand-btn16">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">2.Phosphorylation </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content17">
+Prepare the system:
+<li>Total volume: <b>20μL</b></li>
+<li>ATP:<b>2μL</b></li>
+<li>10×Buffer A:<b>2μL</b></li>
+<li>PNK:<b>1μL</b></li>
+<li>ddH<sub>2</sub>O: add to make the total volume<b> 200μL</b></li>
+<br/>
+<li>Reaction time:<b>0.5h</b></li>
+<li>Reaction temperature:<b> 37℃</b></li>
   </div>
-<a class="expand-btn11">Show More</a>
+<a class="expand-btn17">Show More</a>
 		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">3.Ligation of Phosphorylated DNA Fragments and Dephosphorylated Plasmids </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content18">
+Prepare the system:
+<li>Total volume: <b>20μL</b></li>
+<li>DNA fragment: <b>3μL</b></li>
+<li>Plasmids to be ligase : <b>1μL</b></li>
+<li>T4 Buffer:<b> 2μL</b></li>
+<li>PEG4000:<b>2μL</b></li>
+<li>T4 DNA ligase: <b>1μL </b></li>
+<li>PCR H<sub>2</sub>O:<b>11μL</b></li>
+<br/>
+<li>Reaction time:<b> >1h</b></li>
+<li>Reaction temperature:<b> 22℃</b></li>
+ </div>
+<a class="expand-btn18">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">4.A-Tailing Reaction </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content19">
+Prepare the system:
+<li>Total volume:<b> 20μL</b></li>
+<li>Talling-A reaction Buffer:<b> 4μL</b></li>
+<li>DNA fragment: <b>15μL</b></li>
+<li>Taq DNA Polymerase: <b>1μL</b></li>
+<br/>
+<li>Reaction time: <b>>0.5h</b></li>
+<li>Reaction temperature: <b>72℃</b></li>
+ </div>
+<a class="expand-btn19">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">5.TA cloning </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content20">
+Prepare the system:
+<li>Total volume:<b> 10μL</b></li>
+<li>5×Buffer:<b>2μL</b></li>
+<li>Vector:<b>0.5μL</b></li>
+<li>DNA fragment:<b> 7μL</b></li>
+<li>T4 DNA ligase:<b> 0.5μL</b> </li>
+<br/>
+<li>Reaction time: <b>0.5-1h</b></li>
+<li>Reaction temperature:<b> 22℃</b></li>
+ </div>
+<a class="expand-btn20">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">6.Electroporation </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content21">
+.Cultures (<b>OD630=0.6–0.7</b>) which grow approaching the plateau are harvested.<br/>
+.According to the quantity of transformation, one plasmid need <b>8-10mL</b> cultures. Cells are harvested by centrifugation at<b>3500rpm</b> for <b>13min</b> at<b> 4°C</b>.  <br/>
+.Discard the supernatant, resuspend with <b>20mL</b> sterilized ultrapure water. Then, centrifuge at <b>3500rpm</b> for <b>13min</b> at <b>4°C</b>.<br/>
+.Repeat step3.<br/>
+.Add <b>200mL </b>sterilized ultrapure water for each plasmid.<br/>
+. Plasmid(<b>2μg</b>) is added to <b>200mL</b> condensed cultures in a sterilized EP tube. Then transfer the mixture into a <b>2mm</b>-gap electroporation cuvette.<br/>
+.Place them on the ice for<b> 1-3min</b>.<br/>
+. Bacteria are pulsed at <b>2.5kV(1.8kV)</b>.<br/>
+. <b>200μL </b>BG-11 medium(without antibiotics) is added into the electroporation mixture and incubate for <b>5h</b>.<br/>
+. Use the liquid to spread the plate with antibiotics.
+ </div>
+<a class="expand-btn21">Show More</a>
+		</div><!-- .entry-content -->
+<article id="post-4252" class="post-4252 post type-post status-publish format-standard has-post-thumbnail hentry category-150 tag-174 tag-xinjiang tag-173">
+	<header class="entry-header">
+		<h2 class="entry-title">7.Preparation of BG-11 medium </h2>
+	</header><!-- .entry-header -->
+		<div class="entry-content">
+<div class="note-content22">
+<b><li>NaNO<sub>3</sub>: 1.5 g/L</li>
+<li>K<sub>2</sub>HPO<sub>4</sub>·3H<sub>2</sub>O: 0.04 g/L</li>
+<li>MgSO<sub>4</sub>·7H<sub>2</sub>O: 0.075 g/L</li>
+<li>CaCl<sub>2</sub>·2H<sub>2</sub>O: 0.036 g/L</li>
+<li>Citric acid: 0.006 g/L</li>
+<li>Ferric ammonium citrate: 0.006 g/L</li>
+<li>EDTA(disodium magnesium salt): 0.001 g/L</li>
+<li>Na<sub>2</sub>CO<sub>3</sub>: 0.02 g/L</li>
+<li>Trace metal mix A5+Co: 1 mL/L</li>
+<li>Deionized water: 1000 mL</li>
+<li>pH after autoclaving and cooling: 7.4 </li></b>
+ </div>
+<a class="expand-btn22">Show More</a>
+		</div><!-- .entry-content -->
          </div><!-- #content -->
@@ Line 477: / Line 864: @@
-</div>
-<div class="side-nav">
-						<ul>
-							<li><a class="topLink" href="#Topp" style="color:#5555FF">Top</a></li>
-                                                        <li><a class="topLink" href="#Week1" style="color:#5555FF">Week1</a></li>
-							<li><a class="topLink" href="#Week2" style="color:#5555FF">Week2</a></li>
-							<li><a class="topLink" href="#Week3" style="color:#5555FF">Week3</a></li>
-							<li><a class="topLink" href="#Week4" style="color:#5555FF">Week4</a></li>
-							<li><a class="topLink" href="#Week5" style="color:#5555FF">Week5</a></li>
-							<li><a class="topLink" href="#Week6" style="color:#5555FF">Week6</a></li>
-							<li><a class="topLink" href="#Week7" style="color:#5555FF">Week7</a></li>
-						</ul>
-</div>
-<div class="alert alert-info">
-    <div class="container-fluid">
-	  <div class="alert-icon">
-		<i class="material-icons">info_outline</i>
-	  </div>
-	  <button type="button" class="close" data-dismiss="alert" aria-label="Close">
-		<span aria-hidden="true"><i class="material-icons">clear</i></span>
-	  </button>
-	  <b>Notice: </b> This page is currently under construction. Contents in this page are temporaory and will be modified several times before the final release. &nbsp;&nbsp;&nbsp; &#8212; 2016 iGEM Team Tianjin
-    </div>
 </div>
@@ Line 1,030: / Line 1,391: @@
 </html>
-{{:Team:Tianjin/Templates/AddJS|:Team:Tianjin/Attribution/js/camarts.js}}
 {{:Team:Tianjin/Templates/Sponsor|}}

Difference between revisions of "Team:Tianjin/Protocol"

Latest revision as of 15:10, 19 October 2016

1.Plasmid Extraction

3.Agarose Gel Electrophoresis Products Recycling

4.Agarose Gel Electrophoresis

5.Restriction Endonuclease Digestion