Team:GDSYZX-United/results

Results

Design of our experiment

Hhl1-protein coding region

Gene hhl1 encodes a 231-amino acids protein HHL1.HHL1 helps protect the PSⅡagainst photodamage and help increase quantum yield.However,HHL1 is only expressed when PSⅡ is already damaged , we speculate that the quantity of HHL1 expressed after PSⅡis damaged may be not enough to repair PSⅡ efficiently.We want to prevent photodamage in PSⅡ，so we add photosensitive promoters to initiate the transcription of gene hhl1 before PSⅡ is photodamaged. At certain light intensity,the promoter initiate the transcription of gene hhl1,so there will be HHL1 in chloroplast before PSⅡ is damaged，and the repair process can be faster.

Selecting the light sensitive promoters

Different kinds of Plants have different needs for light, and their resistance against light stress is different.Because of this, the light intensity for photo -sensitive promoters to be activated should be different according to the type of plant. So we use 3 photosensitive promoters in our parts,and then compare the expression level of HHL1 in certain light intensities. After that we select the most-expressed part in certain light intensities. Those corresponding proteins of the three photosensitive promoters we used are:

pif1

It is a key negative regulator of phytochrome-mediated seed germination and acts by inhibiting chlorophyll biosynthesis, light-mediated suppression of hypocotyl elongation and far-red light-mediated suppression of seed germination, and promoting negative gravitropism in hypocotyls. Light reduces this activity in a phy-dependent manner. The protein preferentially interacts with the Pfr forms of Phytochrome A (PhyA) and Phytochrome B (PhyB), is physically associated with APRR1/TOC1 and is degraded in red (R) and far-red (FR) light through the ubiquitin (ub)-26S proteasome pathway to optimize photomorphogenic development in Arabidopsis. It also negatively regulates GA3 oxidase expression.

phyB

Red/far-red photoreceptor involved in the regulation of de-etiolation. Exists in two inter-convertible forms: Pr and Pfr (active). Involved in the light-promotion of seed germination and in the shade avoidance response.

cop1

Represses photomorphogenesis and induces skotomorphogenesis in the dark. Contains a ring finger zinc-binding motif, a coiled-coil domain, and several WD-40 repeats, similar to G-beta proteins. The C-terminus has homology to TAFII80, a subunit of the TFIID component of the RNA polymerase II of Drosophila. Nuclear localization in the dark and cytoplasmic in the light.

Many genes in Arabidopsis are regulated by light.We want to find out these genes and use their promoters.To find out these special genes,we use a website database to find signaling pathways regulated by light. After knowing which protein is expressed in response to light , we use website NCBI to find out the gene sequence that encodes these proteins. To get the promoter sequence of each gene , we use another website to find the promoter sequence.

Extract the Arabidopsis genomic DNA

Arabidopsis genomic DNA is used as template strand in PCR for all our basic parts.We extracted Arabidopsis genomic DNA using a kit box.

Obtain our basic parts

To get five basic parts(pCop1,pPif1,pPhyB,hhl1,pHhl1-hhl1), we have to do five groups of PCR . Before that,we use a software VectorNTI to do the primer design(view primer sequence PDF)，then we asked a biotech company to do primer synthesis.

Following prictures are the electrophoregrams for PCR confirmation of these five DNA fragments:

image
image
image

The size of the PCR fragment of gene hhl1,PHHL-hhl1,phyB,cop1,pif1 are supported to be 3.1kb,4.0kb,0.8kb,1.8kb,1.5kb,respectively.

After assembly our basic parts into a composite part,we use E.coli DH5α to clone the plasmid.

Construction of the biobricks

Followings are the parts and we used in our project(all the prictures shown below are the electrophoregrams of the selecstions and identifications of recombinant plasmids using colony PCR method):

PphyB-hhl1

This biobrick consists of a photosensitive promoter PphyB, and protein coding sequence hhl1.This biobrick is constructed to produce more protein HHL1 in chloroplasts to help protect photosystemⅡ before photodamage takes place.

We used the forward primer of the part PphyB and the downstream primer of the part hhl1 to select the recombinant plasmids.The size of the recombinant fragment is supported to be 3.9kb.

image

Ppif1-hhl1

This biobrick consists of a photosensitive promoter Ppif1,and protein coding sequence hhl1.This biobrick is constructed to produce more protein HHL1 in chloroplasts to help protect photosystemⅡ before photodamage takes place.

We used the forward primer of the part Ppif1 and the downstream primer of the part hhl1 to select the recombinant plasmids.The size of the recombinant fragment is supported to be 4.6 kb.

image

Pcop1-hhl1

This biobrick consists of a photosensitive promoter Pcop1,and protein coding sequence hhl1.This biobrick is constructed to produce more protein HHL1 in chloroplasts to help protect photosystemⅡ before photodamage takes place.

We used the forward primer of the part Pcop1 and the downstream primer of the part hhl1 to select the recombinant plasmids.The size of the recombinant fragment is supported to be 4.9 kb.

image

PphyB-RFP

This biobrick consists of a photosensitive promoter PphyB and an RFP as a reporter.

We used the forward primer of the part PphyB and the downstream primer of the part RFP to select the recombinant plasmids.The size of the recombinant fragment is supported to be 1.7 kb.

image

Ppif1-RFP

This biobrick consists of a photosensitive promoter Ppif1 and an RFP as a reporter.

We used the forward primer of the part Ppif1 and the downstream primer of the part RFP to select the recombinant plasmid.The size of the recombinant fragment is supported to be 2.4 kb.

image

Pcop1-RFP

This biobrick consists of a photosensitive promoter Pcop1 and an RFP as a reporter.

We used the forward primer of the part Pcop1 and the downstream primer of the part RFP to select the recombinant plasmid.The size of the recombinant fragment is supported to be 2.7 kb.

image

Proof of concept

Expression level of protein HHL1

After transfection, we incubate the protoplasts at 2 groups of light intensities to induce the expression of hhl1.

We use semi-quantitive RT-PCR to detect the mRNA from gene hhl1 in protoplasts，the concentration of amplified cDNA of each group is measured by fluorescent quantitation. Data of the concentration of amplified products are used to calculate the relative expression level of mRNA.

image
Growth light High light
REL SE REL SE
Phhl1 1 0.05 1.1 0.07
Pcop1 1 0.03 10.1 1.26
Ppif1 1 0.06 8.9 1.01
PphyB 1 0.09 15.6 1.36

This graph shows the relative expression level of mRNA of gene hhl1 expressed by 4 different parts in growth light(100lux) and high light(1200lux).

pCop1,pPif1,pPhyB do not respond to growth light, the expression level of mRNA is similar to that of pHhl1.However, under high light,three photosensitive promoters all respond specifically and the expression level of mRNA is obviously higher than that in pHhl1.(The transcription level of pCop1,pPif1 and pPhyB under highlight are 10.1,8.9 and 15.6 times of the mRNA level under growth light,respectively.),suggesting that our parts can help produce more protein HHL1 to protect PSⅡ under high light.

(the relative expression level of mRNA of pHhl1 under high light doesn’t change much,but after translation the expression level of protein HHL1 is increased compare to pHhl1 under growth light).

Demonstrate

The trascription level of HHL1 in transgentic Arabidopsis

In the compete transgenic Arabidopsis，the result is very similar. The transcription controlled by pHhl1 is also very low. However, under high light, the transcription controlled by three photosensitive promoters are also very high, and the highest is phyB, and then is pCop1.

These suggested that our parts can also function in the compete plants, and the result is similar.

image

Fig.The transcription level of HHL1 in transgentic Arabidopsis

Growth light High light
REL SE REL SE
Phhl1 1 0.07 1.1 0.17
Pcop1 1 0.13 15.1 1.86
Ppif1 1 0.26 10.9 0.61
PphyB 1 0.19 20.6 1.96

Photosynthetic efficiency in transgentic Arabidopsis

We transformed four vectors with stably expressions into Arabidopsis, then detected the photosynthetic efficiency of transgenic Arabidopsis.

  1）Under growth light condition, the chloroplast of the plants that transformed in four different vectors were not damaged, so the red fluorescence of the chloroplasts have no obvious difference and maintain a high level.

  2）However, under high light condition, the construction of chloroplasts were damaged in different level although the protein HHL1 exsist. So the red fluorescence of chloroplast had decreased, but the decrease level is quit different, the lower the fluorescence is, the stronger the damage is.

From the diagram we can know that the fluorescence of plants transformed with three photosensitive promoters are stronger than the promoter pHhl1, and the pPhyB is the strongest.And that plants transformed with promoter pPhyB, its photosensitive efficiency is the best and its photodamage is the lowest.

image

Fig.Photosynthetic efficiency in transgentic Arabidopsis

Growth light High light
Fv/Fm SE Fv/Fm SE
Phhl1 0.82 0.02 0.65 0.017
Pcop1 0.825 0.013 0.72 0.0086
Ppif1 0.813 0.006 0.69 0.0161
PphyB 0.819 0.019 0.78 0.0216

CONCLUSION

From the result above, we can know that, three photosensitive promoters can be activated by highlight to improve the expression of hhl1 and decrease photodamage, and the promoter phyB is the most efficient one. Therefore, in the plants, with our biobricks, the expression of hhl1 under highlight can be improved dramatically to protect PSⅡ and improve the the photosynthetic efficiency.

CONCLUSION

1. Explore the light intensity rank that exactly activate the activities of three photosensitive promoters.

2. Explore the hhl1 translation levels of four biobricks that change with light intensity.

FUTURE APPLICATION

Apply our idea in other plants to decrease the photodamage under highlight,especially in tropical and semitropical zone where the plants often suffer from highlight.

To improve the resistance of plants in many area, for examplt: it maybe can improve the output of grain.