Team:LMU-TUM Munich/Localization

The receptors

Muc16 Sticker Receptors 001.png

In the following, we are going to explore the thought processes that went into the design of the receptors we built to mediate cross-linking of cells for bioprinting.

Therefore, we built two kinds of receptor constructs that both on their own, when being expressed in mammalian cells, are able to mediate interactions with streptavidin - allowing polymerization of genetically engineered cells for bioprinting.

1) A receptor containing an extracellular biotin acceptor peptide (BAP) that is endogenously biotinylated by a coexpressed biotin ligase (BirA) and thus presents biotin groups at the cell surface.

A) Schematic depiction of the modular structure of the created genetic receptor constructs. B) Schematic depiction of the modular structure of the membrane receptors for cross-linking of cells via biotin-streptavidin interactions.

The biotin acceptor peptide (BAP) is a short peptide sequence originating from E. coli. The sequence, being composed of 15 amino acid residues, is biotinylated specifically at a lysine residue within the recognition sequence by a coexpressed biotin ligase (BirA).[1]Thus, it can mediate the functionality of the receptor by presenting biotin, allowing the interaction with streptavidin in the reservoir solution. The biotin ligase BirA is therefore encoded by the same vector as the receptor, with an internal ribosome entry site (IRES) allowing translation of two open reading frames (ORFs) from a single polycistronic plasmid. BirA is targeted to the ER via an Igκ signal peptide as well as an ER retention signal. Thus being permanently located in the ER, BirA is able to biotinylate the BAP of translocating proteins upon their translocation, i.e. to the cell surface.

2) Receptors presenting an extracellular, single-chain streptavidin variant.

These avidin derivates, by design, allow the functional fusion of the otherwise tetrameric avidin molecule with our receptor. Two different variants were hereby used: The so-called enhanced monomeric avidin, a single subunit avidin that is able to bind biotin as a monomer, and single-chain avidin, which resembles a single-chain streptavidin tetramer, the subunits being connected via polypeptide linkers.

Both receptors generally mediate the same purpose: By interacting with streptavidin in the printing reservoir - either directly by presenting biotin (biotin acceptor-peptide) or indirectly via binding to a biotinylated linker (single chain-avidin variants), cells are being cross-linked due to the polyvalent binding of single streptavidin molecules to several biotin moieties at once.


The incredible journey: signal peptides and protein targeting

Essential to a protein's function is not only its activity or binding properties, but also its presence at the right time, at the right place. One of the most ubiquitous elements for protein targeting is the signal peptide, which enables the translocation of proteins to the ER, from where their journey may continue to the place of function. Proteins containing a signal peptide include transmembrane proteins, secreted proteins, proteins of the ER itself, proteins of the Golgi apparatus and several more. For our project, signal peptides constitute a crucial part for many constructs, being used for targeting of transmembrane proteins to the cell surface, targeting proteins to the ER and the secretion of proteins.

Schematic depiction of the co-translational translocation of a membrane protein into the ER. Shown are the ribosome, the nascent peptide chain containing the signal peptide ('start-transfer sequence') as well as the stop-transfer sequence, and the ER membrane[2]

This mainly hydrophobic sequence, being both required and sufficient for membrane proteins to be translocated to their place of action, allows targeting of proteins to the ER and, from there, to their specific location in the membrane - in the case of receptors to the cell surface.[3] The signal peptide is a short peptide (less than 30 amino acids) that is recognized by the so-called signal recognition particle upon translation at the rough ER, mediating the co-translational translocation of the nascent peptide chain into the ER.[4] During this project, three different signal peptide constructs are being tested in order to determine the ideal one:

1) The EGFR signal peptide was taken from the iGEM parts registry ([http://parts.igem.org/Part:BBa_K157001:Design BBa_K157001]) and combined with a BioBrick containing the CMV promoter sequence ([http://parts.igem.org/Part:BBa_K747096 BBa_K747096]) via the RFC10 cloning standard.

2) The BM40 and Igκ signal peptides were designed and synthesized while furthermore adding additional elements to the 5'-UTR of the constructs, and combined with a BioBrick containing the CMV promoter sequence ([http://parts.igem.org/Part:BBa_K747096 BBa_K747096]) via the RFC10 cloning standard.

As shown below, the EGFR signal peptide taken from the parts registry is constructed in a way that the signal peptide ORF immediately follows the RFC10 cloning scar after the CMV promoter, thus resulting in a very short 5’ untranslated region (UTR) of the transcribed mRNA. The combination of the CMV promoter with the synthesized BM40 and Igκ signal peptides allows for a considerably longer 5’ UTR of the resulting mRNA - additionally allowing them to contain a full Kozak consensus sequence by design. The Kozak sequence is recognized by the ribosome as a translational start site; this element missing or deviating from the consensus sequence may considerably decrease translation efficiency. For the EGFR signal peptide construct, a Kozak sequence is not present, as it would have to preceed the start codon ATG - a position which is occupied by the RFC10 cloning scar. Since both the distance from the promoter to the open reading frame as well as the Kozak consensus sequence are considered crucial parameters for expression levels[5], the BM40 and Igκ constructs were designed to increase expression levels of the receptor.


Prediction of signal peptide functionality

As the quantitative functionality of signal peptides had to be determined before including one of these into the final receptor constructs, the three options (Igκ, BM40, EGFR) were tested via bioinformatic tools as well as a secretion assay of luciferase constructs. For the theoretical prediction of signal peptide efficiency,

Bioinformatic signal peptide analysis via the SignalP server

The [http://www.cbs.dtu.dk/services/SignalP SignalP] server, being able to discriminate the hydrophobic signal peptide sequence from the transmembrane domain[6], can determine whether a sequence possesses the biophysical requirements for functioning as a signal peptide. Furthermore, it is able to predict the probable cleavage site of the signal peptide after its translocation into the ER. For all constructs, signal peptide functionality is predicted, as well as a potential cleavage site. The complete translated amino acid sequences of the respective receptor constructs were used as input. The algorithm for eukaryotes with default D-cutoff value was chosen.


A) Schematic depiction of protein-coding mRNA containing a 5'- and 3'-UTR, the first of which being an important factor in translation efficiency. B) Identification of signal peptides within the receptor construct containing the EGFR, IgKappa and BM40 signal peptide via the SignalP 4.1 server. Plotted probabilities represent the raw cleavage site “C-score”, the signal peptide “S-score” and the combined cleavage site “Y-score”. C) Multiple ClustalW sequence alignment of the BM40, EGFR and Igκ signal peptide construct, depicting a gap indicating smaller length of the 5'-UTR for the EGFR-signal peptide construct. For the Igκ and BM40 signal peptide constructs, a T7 promoter spacer as well as a Kozak sequence increaes the distance between TATA-box and protein-coding region.


For all three signal peptides, the high S-score indicates high signal peptide functionality. For the Igκ signal peptide, a cleavage site between amino acid 20 and 21 within the signal peptide is predicted. For the BM40 signal peptide, a cleavage site between amino acid 17 and 18 is predicted, and for the EGFR signal peptide, a cleavage site between amino acid 24 and 25 is predicted.

Quantification of signal-peptide mediated translocation via a secretion luciferase assay

For the quantification of signal peptide functionality via a luciferase assay, constructs only containing one of three signal peptides - the EGFR signal peptide, the Igκ signal peptide or the BM40 signal peptide and a nanoluciferase, as well as a CMV promoter, a Strep-tag II for immunochemical detection and the hGH polyadenylation signal sequence were used. Containing a signal peptide while not containing any transmembrane domains, these constructs are being translocated into the ER and then secreted into the medium. Using the luciferase assay, one can quantifiy the amount of luminescence - and thus, proportionally, the amount of secreted nanoluciferase - by measuring the conversion of luciferin into visible light and integrating it over a timespan of 5 s. Therefore, medium samples were taken every 12 h after transfection and measured via the Promega NanoGlo luciferase assay system by Promega according to the manufacturer's instructions.


A) Schematic depiction of the genetic constructs used for signal peptide testing via a secretion luciferase assay. B) Results of the luciferase assay, showing luminescence in relative luminescence units (RLU) as a function of time for the previously described three different signal peptide constructs as well as a control construct containing no signal peptide. C) Detection of secreted luciferases in the medium via a Western Blot, using an anti-Strep-tag II antibody as well as a horse raddish peroxidase-coupled secondary antibody for detection.

Receptor elements: Stability and detection

Apart from the functional parts that mediate the (strept)avidin-biotin interaction, other elements in the receptor were designed to make sure it is optimally translocated to the membrane, as stable as possible, and easily detectable.

EGFR transmembrane domain

For anchoring in the membrane, we decided to use a type I membrane protein, which possesses a single membrane span with defined localization of N-terminus out- and inside of the cell, respectively. The N-terminal transmembrane α-helix of human EGFR (UniProt P00533, amino acids 622-653) was herefore chosen. A stop-transfer sequence consisting of charged amino acids - being characteristic for type I membrane proteins - was added at the C-terminus, and the sequence was furthermore flanked by a (GGGGC)2-linker at the N- and C-terminus, respectively. As predicted by the [http://www.cbs.dtu.dk/services/TMHMM/ TMHMM 2.0 server for the prediction of transmembrane helices][7], amino acid residues N-terminal of the transmembrane domain are positioned outside of the cell, while residues C-terminal of the domain are positioned on the inside of the cell. The addition of a stop-transfer sequence as in the naturally occuring EGFR sequence, as well as the addition of flexible linkers, makes our EGFR-TMD an improvement over the BioBrick [http://partsregistry.org/wiki/index.php?title=Part:BBa_K157002 BBa_K157002], which does not possess either of these elements.


A) Multiple sequence alignment of human EGFR (see [http://www.uniprot.org/uniprot/P00533 UniProt P00533]), the EGFR transmembrane domain BioBrick from the registry ([http://partsregistry.org/wiki/index.php?title=Part:BBa_K157002 BBa_K157002] and the extended EGFR transmembrane designed by us, containing a charged stop-transfer domain as well as linker elements at the C- and N-termini. B) Transmembrane domain prediction by the [http://www.cbs.dtu.dk/services/TMHMM/ TMHMM 2.0 server], indicating positioning of N- and C-termini out- and inside of the cell, respectively, as well as predicting functionality of transmembrane regions. C) Schematic depiction of the C-terminal stop-transfer sequence of the receptor.


Moreover, the receptor contains three functional elements for its detection: The intracellularily located red fluorescent protein mRuby 3 for detection of the receptor via fluorescence microscopy, an extracellular epitope domain for immunochemical detection via A3C5-antibody fragments and an intracellular Strep-tag II for the detection and purification via immunochemical methods.

The vector furthermore contains the poly-adenylation signal of human growth hormone (hGH) for functional polyadenylation of the transcribed mRNA. A description for the respective functional elements is given in the following sections.

A3C5 epitope tag

Antibodies have various areas of application in life science, including protein detection, pulldown experiments and even immunotherapy. Having originally been discovered in 1995 during an in vitro screening for antibodies against cytomegaloviral proteins,[8] the A3C5 antibody is an established molecular tool for specific recog- nition of proteins. By tagging cell surface proteins with an epitope specifically recognized by A3C5 (being a minimal peptide sequence of 11 amino acids), one is easily able to detect tagged proteins via immunofluorescence microscopy, FACS or one may purify them via pulldown experiments. Through the latter, one may also screen for in vivo interaction partners of the tagged protein.


mRuby 3

Having originally been engineered as a monomeric form of the red fluorescent protein eqFP611, mRuby variants are sine of the brightest red fluorescent proteins available. [9] With an excitation maximum at a wavelength of 558 nm and an emission wavelength maximum of 605 nm, the resulting stokes shift of 57 nm makes mRuby a good choice for fluorescent microscopy imaging and, thus, allows the visualization of the receptor in its cellular environment by being fused to the C-terminus of the transmembrane domain. mRuby is especially powerful for the fusion with receptors - not only due to its small size and high stability, but also due to the fact that, in comparison with eGFP, it appears up to 10 times brighter in membrane enviroments. The mRuby variant used here is mRuby 3, having been engineered for even more improved brightness and photostability.[10]

Strep-tag II

The Strep-tag II is an eight amino acid peptide sequence that specifically interacts with Streptavidin and can thus be used for easy one-step purification of the receptor via affinity chromatography. [11]

CMV promoter

Last but not least, high expression levels of the receptor, so that a high avidity for the interaction may be reached. The CMV promoter (taken from the parts registry, [http://parts.igem.org/Part:BBa_K74709 BBa_K74709]) therefore enables constitutively high expression of the receptor.


Nanoluciferase

The concept of bioluminescence has a great meaning for several invertebrate species, allowing communication with other individuals, signaling receptiveness or deterring predators.[12] The most common enzyme responsible for the creation of bioluminescence are the luciferases (from the latin words ’lux’ and ’ferre’, meaning ’light-carrier’). These enzymes, among others found in fireflies and deep-sea shrimp, commonly consume a substrate called luciferin as well as energy in the form of ATP or reduction equivalents in order to create light-emission through oxidation. The underlying mechanism hereby relies on the creation of an instable, highly excited intermediate under the consumption of energy. This high-energy intermediate then spontaneously falls back into a state of lower energy, emitting the energetical difference as visible light. While mainly being used as a folded, stabilizing element at the N-terminus for the construct containing the biotin acceptor peptide, the nanoluciferase could also be used for advanced binding studies via luciferase assays.[13]

Reaction scheme of the reaction catalyzed by the NanoLuc nanoluciferase. Taken from the NanoGlo Assay Kit manual.

Luciferases have also found their way into biotechnological applications.[14] The simplistic concept of creating visible (and thus easily measurable) light makes luciferases ideal reporters for the expression of secretable proteins via a corresponding assay. This project also makes use of a luciferase for the determination of expression levels of the surface receptor. The monomeric luciferase used in this project, the so-called ’NanoLuc-RTM-'[15] (due to terms of simplicity referred to as ’nanoluciferase’ in the following), can be fused to other proteins in order to make their expression visible and quantifiable. This engineered luciferase emits a steady, easily detectable glow when exposed to its substrate, while being only 19 kDa large and being brighter, more specific and steadier than other luciferases commonly found in nature. Using luciferases offers several advantages over fluorescent proteins, including higher sensitivity, smaller size and decreased damage to cells during measurements, as no excitation is necessary for light emission.






















BioBrick-compatible vectors for mammalian cells: transient transfection & stable integration

Semi-stable transfection of the receptors in human cells

In order to check whether our constructs will be expressed by eukaryotic cells we first of all choose the MEXi™ cell line for semi-stable transfection. MEXi™ is a suspension HEK293E cell line by iba lifesciences that encodes the viral protein EBNA1 in it's genome. EBNA1 is a protein derived from Eppstein-Barr-Virus that mediates the replication initiation, gene regulation and maintenance of viral extrachromosomal DNA in the host cell. The second part of the MEXi™ system is made up by the pDSG-IBA vector that carries the oriP, which is recognized by EBNA1. EBNA1 binds to the oriP, and recruits the replication apparatus on the one hand, as well as to nuclear structures of the host’s genome on the other hand which leads to the episomal maintenance and co-replication of the plasmid during every division cycle.[16]

We cloned our receptor constructs into the pDSG-IBA vector and then transfected the MEXi™ cells using the PEI transfection method (see methods). Polyethylene imin (PEI) as a cationic polymer forms complexes with the negatively charged DNA. These complexes are taken up by the cell via endocytosis and carried to the nucleus. [17]

pDSG plasmids where used for semi-stable transfection of the receptor constructs into mammalian cells. Cloning was performed via RFC10 after integrating the restriction sites by QC-PCR into the verctor backbone.
  • Abbildung semistabile transfektion schematisch


An everlasting bond: creating a stable cell line

Printing a whole or even part of an organ would require billions of cells. An average liver for example weights about three pounds and hosts ~108 cells per gram tissue. [18] [19]

Since transient, and even semi-stable transfected cells do not necessarily keep the extrachromosomal DNA forever, new cells would have to be transfected again and again which is very time and money inefficient. Therefor we created a three stable cell lines, that chromosomally encode the receptor constructs. For this purpose we used the FlpIn™-System by invitrogen. The three compound system consists of HEK-TRex™-293 cells that harbour one chromosomal Flp recombination target (FRT) site, a Flp recombinase expression plasmid and the plasmid encoding the receptor as well as another FRT site for integration.[20] The detailed principle of the intergration is described in the figure below.

  • Abbildung

Cells that succesfully integrated the plasmid into their genome will lose their resistance for Zeocin™ but become resistant to hygromycin B (hygB), since the plasmid encodes the hygB-phosphotransferase, a kinase inactivating hygB by phophorylation.[21] Thus the transfectanted cells can be easily selected via hygromycin B. To make sure, the resistency doesn't come from non-intergrated plasmid, this process takes several weeks and divison cycles.

pcDNA5™ plasmids where used for stable transfection of the receptor constructs into mammalian cells. Cloning was performed via RFC10 after integrating the restriction sites by QC-PCR into the verctor backbone.





























  • Abbilgung mit stabiler Integration, Zeocin-Test, genomische PCR

Subcellular protein localization using fluorescence microscopy

File:Muc16 Receptor Microscopy 001.png
850px


































Quantification of functionalized membrane proteins using flow cytometry

Muc16 Receptor FACS 001.png


































Immunochemical detecton of functionalized membrane protein using Western Blot

Muc16 Receptor WB 001.png

































Properties of membrane proteins
Receptor BioBrick Amino acids Moelcular mass [Da]
BAP-Receptor [http://parts.igem.org/Part:BBa_K2170000 BBa_K2170000] 507 55 440
eMA-Receptor [http://parts.igem.org/Part:BBa_K2170001 BBa_K2170001] 448 48 618
scAvidin-Receptor [http://parts.igem.org/Part:BBa_K2170002 BBa_K2170002] 877 95 028

Quantification of mRNA expression levels by RT-q-PCR

High resolution imaging using scanning electron microscopy (SEM)

Muc16 Receptor SEM 002.png

































References

  1. ↑ Chen, I., Howarth, M., Lin, W., & Ting, A. Y. (2005). Site-specific labeling of cell surface proteins with biophysical probes using biotin ligase. Nature methods, 2(2), 99-104.
  2. ↑ Taken from Alberts, B., Bray, D., Hopkin, K., Johnson, A., Lewis, J., Raff, M., ... & Walter, P. (2010). Essential cell biology. Garland Science.
  3. ↑ Rapoport, T. A. (2007). Protein translocation across the eukaryotic endoplasmic reticulum and bacterial plasma membranes. Nature, 450(7170), 663-669.
  4. ↑ Walter, P., Ibrahimi, I., & Blobel, G. U. N. T. E. R. (1981). Translocation of proteins across the endoplasmic reticulum. I. Signal recognition protein (SRP) binds to in-vitro-assembled polysomes synthesizing secretory protein. The Journal of Cell Biology, 91(2), 545-550.
  5. ↑ Kozak, M. (1987). An analysis of 5'-noncoding sequences from 699 vertebrate messenger RNAs. Nucleic acids research, 15(20), 8125-8148.
  6. ↑ Petersen, T. N., Brunak, S., von Heijne, G., & Nielsen, H. (2011). SignalP 4.0: discriminating signal peptides from transmembrane regions. Nature methods, 8(10), 785-786.
  7. ↑ Sonnhammer, E. L., Von Heijne, G., & Krogh, A. (1998, July). A hidden Markov model for predicting transmembrane helices in protein sequences. In Ismb (Vol. 6, pp. 175-182).
  8. ↑ Alexander, H., Harpprecht, J., Podzuweit, H. G., Rautenberg, P., & Müller-Ruchholtz, W. (1994). Human monoclonal antibodies recognize early and late viral proteins of human cytomegalovirus. Human Antibodies, 5(1-2), 81-90.
  9. ↑ Kredel, S., Oswald, F., Nienhaus, K., Deuschle, K., Röcker, C., Wolff, M., ... & Wiedenmann, J. (2009). mRuby, a bright monomeric red fluorescent protein for labeling of subcellular structures. PloS one, 4(2), e4391.
  10. ↑ Bajar, B. T., Wang, E. S., Lam, A. J., Kim, B. B., Jacobs, C. L., Howe, E. S., ... & Chu, J. (2016). Improving brightness and photostability of green and red fluorescent proteins for live cell imaging and FRET reporting. Scientific reports, 6.
  11. ↑ Schmidt, T. G., & Skerra, A. (2007). The Strep-tag system for one-step purification and high-affinity detection or capturing of proteins. Nature protocols, 2(6), 1528-1535.
  12. ↑ Case, J. F. (2004). Flight studies on photic communication by the firefly Photinus pyralis. Integrative and comparative biology, 44(3), 250-258.
  13. ↑ Zhang, L., Song, G., Xu, T., Wu, Q. P., Shao, X. X., Liu, Y. L., ... & Guo, Z. Y. (2013). A novel ultrasensitive bioluminescent receptor-binding assay of INSL3 through chemical conjugation with nanoluciferase. Biochimie, 95(12), 2454-2459.
  14. ↑ Gould, S. J., & Subramani, S. (1988). Firefly luciferase as a tool in molecular and cell biology. Analytical biochemistry, 175(1), 5-13.
  15. ↑ Hall, M. P., Unch, J., Binkowski, B. F., Valley, M. P., Butler, B. L., Wood, M. G., ... & Robers, M. B. (2012). Engineered luciferase reporter from a deep sea shrimp utilizing a novel imidazopyrazinone substrate. ACS chemical biology, 7(11), 1848-1857.
  16. ↑ Nanbo, A., Sugden, A., & Sugden, B. (2007). The coupling of synthesis and partitioning of EBV's plasmid replicon is revealed in live cells. The EMBO journal, 26(19), 4252-4262.
  17. ↑ Boussif, O., Lezoualc'h, F., Zanta, M. A., Mergny, M. D., Scherman, D., Demeneix, B., & Behr, J. P. (1995). A versatile vector for gene and oligonucleotide transfer into cells in culture and in vivo: polyethylenimine.Proceedings of the National Academy of Sciences, 92(16), 7297-7301.
  18. ↑ Molina, D. K., & DiMaio, V. J. (2012). Normal organ weights in men: part II—the brain, lungs, liver, spleen, and kidneys. The American journal of forensic medicine and pathology, 33(4), 368-372.
  19. ↑ Wilson, Z. E., Rostami‐Hodjegan, A., Burn, J. L., Tooley, A., Boyle, J., Ellis, S. W., & Tucker, G. T. (2003). Inter‐individual variability in levels of human microsomal protein and hepatocellularity per gram of liver. British journal of clinical pharmacology, 56(4), 433-440.
  20. ↑ https://www.thermofisher.com/de/de/home/references/protocols/proteins-expression-isolation-and-analysis/protein-expression-protocol/flp-in-system-for-generating-constitutive-expression-cell-lines.html#prot4
  21. ↑ Blochlinger, K. A. R. E. N., & Diggelmann, H. E. I. D. I. (1984). Hygromycin B phosphotransferase as a selectable marker for DNA transfer experiments with higher eucaryotic cells. Molecular and cellular biology, 4(12), 2929-2931.

up button Back to top

LMU & TUM Munich

Technische Universität MünchenLudwig-Maximilians-Universität München

United team from Munich's universities

Contact us:

Address

iGEM Team TU-Munich
Emil-Erlenmeyer-Forum 5
85354 Freising, Germany