Labjournal

1 kbp GeneRuler:

100 bp GeneRuler:

PageRuler Plus:

Samples

Transformation of E. coli XL1 blue with Phytochrome B (2–908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Investigator: Jeff, Rosario

Aim of the experiment: Transformation of Phytochrome B for protein fusion

Procedure:

CaCl₂-competent E. coli XL1-Blue cells were taken from the stock in –80 °C freezer and gently thawed on ice

2 µl of DNA was added to 100 µl of competent cells and gently mixed

30 min incubation on ice

5 min heat shock at 37 °C

Added 1 ml LB medium to each tube

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker

100 µl of the cell suspension was plated on one chloramphenicol plate

The rest were centrifuged for 1 min at 13,000 rpm and the supernatant was dicarded

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on a new chlorampenicol plate.

Miniprep of pTUM100 with pGAL, pTEF1, pTEF2, pADH and RFC25 compatible RFP generator

Investigator: Jeff, Rosario

Aim of the experiment: Miniprep of pTUM100 with pGAL, pTEF1, pTEF2, pADH and RFC25 compatible RFP generator

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)

Sequencing of RFP-Generator (RFC25, pSB1C3)

Investigator: Jeff, Rosario

Aim of the experiment: Sequencing of RFP-Generator (RFC25, pSB1C3)

Procedure:

Sequencing batch were prepared after manufacturer's protocol. (15 µl of plasmid DNA (50 - 100 ng) and 2 µl sequencing primer)

Picking of of E. coli XL1 blue with Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Investigator: Jeff, Rosario, Florian

Aim of the experiment: Picking of of E. coli XL1 blue with Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Procedure:

pSB1C3 plasmid with BBa_K801031 (PhyB 2 - 908 aa, RFC25): Colonies were picked from chloramphenicol plates.

Picked pipette tips was transferred into cell-culture tubes with air-permeable, sterile cover. Each tube contain 4 mL of LB-medium + 4 µL chloramphenicol(1000x).

4 colonies were picked.

These tubes were transferred in a cell culture shaker at 37 °C and were incubated overnight

Analytical digestion and gelelectrophoresis of RFP-generator (RFC25, pSB1C3, P4 & P5)

Investigator: Jeff, Rosario, Florian

Aim of the experiment: Analytical digestion and gelelectrophoresis of RFP-generator (RFC25, pSB1C3, P4 & P5).

Procedure:

Batch for analytical digestion for P4 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P4
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Batch for analytical digestion for P5 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P5
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Incubation for 90 min at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

Results:

1 kbp ladder DNA ladder	P4	P5
	Mutation successful	Mutation successful!

Parts are compliant and do not contain RFC25 forbidden restriction sites.

500px

Sequencing of pTUM vectors with pGAL, pADH, pTEF1, pTEF2

Investigator: Jeff, Rosario, Florian

Aim of the experiment: Sequencing of pTUM vectors with pGAL, pADH, pTEF1, pTEF2

Procedure:

Sequencing batch were prepared after manufacturer's protocol. (15 µl of plasmid DNA (50 - 100 ng) and 2 µl sequencing primer).

The different vectors we sequenced received the following barcodes:

- ADH in pTUM100: FR01002265

- TEF1 in pTUM100: FR01002266

- TEF2 in pTUM100: FR01002266

- GAL in pTUM100: FR01002268

Sequencing of TEF2 in pTUM100 was not interpretable. The other sequences were consistent with the sequences in the parts registry.

Miniprep of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Investigator: Jeff, Florian

Aim of the experiment: Miniprep of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3).

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)

Analytical digestion and gelelectrophoresis of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3), P7 - P10

Investigator: Jeff, Florian

Aim of the experiment: Analytical digestion and gelelectrophoresis of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3), P7 - P10.

Procedure:

Batch for analytical digestion for P7 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P7
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Batch for analytical digestion for P8 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P8
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Batch for analytical digestion for P9 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P9
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Batch for analytical digestion for P10 with NgoMIV+AgeI-HF

volume	reagent
2.5 µl	Plasmid DNA P10
2 µl	NEBuffer 4 (10x)
0.25 µl	NgoMIV (10 U/µl)
0.25 µl	AgeI-HF (20 U/µl)
15 µl	ddH2O
=20 µl	TOTAL

Incubation for 90 min at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

Results:

1 kbp ladder DNA ladder	P7	P8	P9	P10
	Part is correct	Part is correct	Part is correct	Part is correct

500px

Transformation of E. coli XL1 blue with

Investigator:

Aim of the experiment: Transformation of E. coli XL1 blue.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

µl of DNA was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of µl LB-medium to each tube.

The cell suspension was plated on ampicillin plates (inclusive rescue plate) and incubated over night at 37 °C in the cell-culture shaker.

Week 1, May 16th - May 22nd

Monday, May 16th

Streptavidin Plasmid Check

Investigator: JB, LK, JH

Aim of the experiment: Verify cloning

Procedure:

MiniPrep following manufacturer's protocol (QIAprep MiniPrep, Qiagen) (4 clones each of pSA1, pSAm1 in pASK75)
Analytic digestion with 0.25 µL XbaI, 0.25 µL HindIII (HF), 1 µL SmartCut Buffer, 5 µL plasmid DNA, 3.5 µl H₂O
5 µL analyzed in gel electrophoresis (1% agarose)

Results: Successful cloning verified. Stored at –20 °C

Lane 1: 5 µL Thermo Fisher, 1 kb ladder

Lanes 2–9: 5 µL digestions of P6–P13, band of SA (mut1) at about 300 bp, band of digested plasmid at about 3,000 bp

Streptavidin Expression: Transform BL21

Investigator: JB, JH

Aim of the experiment: Express pSA1 and pSAm1 in E. coli BL21

Procedure:

Transformation into competent E. coli BL21 according to protocol of P6 and P10

Results: Plates (LB Amp) in incubator (37 °C) for further processing

Tuesday, May 17th

SDS Gel Analysis

Investigator: CG

Aim of the experiment: Analyze collagen 1/2, eGFP, fraction 30 of egg precipitation via SDS gel

Procedure:

Mixed 80 µL samples with 20 µL SDS buffer

Heated at 95 °C for 10 min

1 d staining, 1 d unstaining

Results: Successful cloning verified. Stored at –20 °C

Lane 1: 8 µL marker (Thermo Fisher #26610)

Lane 2: Fraction 30 (IEC), 3 µL, band at 35 kDa, avidin expected at 16 kDa

Lane 3: eGFP, 12 µL, band at 27 kDa, eGFP expected at 27 kDa, many impurities

Lane 4: Collagen 1, 12 µL, no sharp band

Lane 5: Collagen 1, 12 µL, no sharp band

$Muc16 SDS gel analysis fraction 30 of egg-precipitation.png$

MiniPreps pSb1C3–AviTag, –A3C5 and pASK75–(SA1), –(SAm1)

Investigator: CR, CG

Aim of the experiment: Verify cloning

Procedure:

MiniPrep was performed following manufacturer's protocol (QIAprep MiniPrep, Qiagen)

Analytic digestion with 0.25 µL XbaI, 0.25 µL HindIII (HF) for pASK plasmids and 0.25 µL NgomIV, 0.25 µL AgeI (HF) for pSb1C3 plasmids, 1 µL SmartCut Buffer, 5 µL plasmid DNA, 3.5 µL H₂O

5 µL on 1% agarose gel electrophoresis

Results: Successful cloning verified for pASK plasmids. Repeat pSb1C3 plasmids. Stored at –20 °C

Lane 1: 5 µL Thermo Fisher, 1 kb Ladder

Lane 2: 5 µL digestion of pSb1C3–AviTag

Lane 3: 5 µL digestion of pSb1C3–A3C5

Lane 5: 5 µL digestion of pASK75(SA1), EB elution

Lane 6: 5 µL digestion of pASK75(SAmut1), EB elution

Lane 7: 5 µL digestion of pASK75(SAmut1), H₂O elution

Inoculation of Pre-Culture with BL21 (pASK75 (SA1)) in LB Medium

Investigator: CR

Aim of the experiment: Pre-culture for streptavidin expression in TB medium

Procedure:

Added 50 µL ampicillin to 50 mL LB medium

Picked colonies from BL21 (pASK75 (SA1))

Inoculated LB medium

Incubated at 30 °C overnight

Wednesday, May 18th

Repeat Analytical Gel of pSb1C3–AviTag, –A3C5

Investigator: CG, CR

Aim of the experiment: Verify cloning

Procedure:

Analytic digestion with 0.25 µL NgoMIV, 0.25 µL AgeI (HF) for pSb1C3 plasmids, 1 µL SmartCut Buffer, 8.5 µL plasmid DNA
10 µL analyzed in gel electrophoresis (2% agarose)

Results:

Inoculation of BL21 (pASK75 (SA1)) Culture in 2 L TB Medium and Induction of Streptavidin Production by Addition of Tetracycline

Investigator: CR

Aim of the experiment: Produce streptavidin

Procedure:

Ampicillin (2 mL) was added to the medium (1:1000)
The pre-culture (50 mL) was poured into the medium
Culture incubated at 37 °C and 140 rpm until OD₅₅₀ reached 0.5
To induce streptavidin expression, anhydro-tetracycline (200 µL) was added to the culture (1:10,000)
The culture was incubated at 37 °C and 140 rpm for 4 hours

Results: Streptavidin expression by BL21

Expression and Harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB Medium

Investigator: CR, JB, JH

Aim of the experiment: Recombinant expression and purification of streptavidin

Procedure:

After expression, cultures were transferred into centrifuge tubes and spun down in the centrifuge (4 °C, 5000 rpm, 20 min, F4X1L rotor)
The supernatant was discarded, and the pellet was transferred into a beaker of sufficient size and resuspended in Tris Buffer B cooled to 4 °C (50 mM Tris/HCl pH = 8.0, 1 mM EDTA)
The solution was homogenized in the PANDA (ask supervisor)
The resulting lysate was transferred into centrifuge tubes and spun down (4 °C, 18,000 rpm, 10 min, XX34-rotor). The supernatant was discarded, and the pellet was resuspended in 6 M Gua-HCl (pH = 1.5) at 4 °C overnight.

Dialysis of eGFP

Investigator: NA, JH, CR

Aim of the experiment: Purify eGFP

Procedure:

eGFP was thawed on ice
eGFP was then poured into a dialysis hose (cut-off 14 kDa)
The hose was then placed in ice-cold Tris/HCl 20 mM pH 8.0
Dialyzed at 4 °C overnight (XX34 rotor). The supernatant was discarded, and the pellet was

MiniPrep of quickchanged pNGAL146-A2 EspP

Investigator: NA

Aim of the experiment: Extraction of pNGAL146-A2 plasmid from XL1 blue

Procedure:

MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen)

Sequencing of P14 (Avi-Tag), P15 (A3C5) & P19 (Quick change (QC) EspP in pNGAL-A2)

Investigator: CR, NA

Aim of the experiment: Sequencing of P14 (Avi-Tag), P15 (A3C5) & P19 (Quick change (QC) EspP in pNGAL-A2)

Procedure:

Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)
The different plasmids we prepared received the following barcodes:
P14 : FR11326653
P15 : FR11326655
P19 (K4): FR11326654
P16 (K1): FR11326652
P17 (K2): FR11326651
P18 (K3): FR11326650

Digestion of P16 , P17, P18 & P19 (all QC EspP in pNGAL-A2) with AgeI & HindIII + analytical gel

Investigator: NA, JH, CR

Aim of the experiment: Verification of success of quickchange

Procedure:

analytic digestion with: 0,25 µl HindIII (HF), 0,25 µl AgeI (HF), 1 µl SmartCut Buffer, 500 ng plasmid-DNA, fill up with ddH2O (Vtotal= 10µL)
10 µl on 2% agarose gel for electrophoresis

Results: No signal at 600 bp --> quickchange seems to be successful (waiting for sequencing)

Thursday, May 19th

Re-Sequencing of P19

Investigator: CR

Aim of the experiment: Re-Sequencing of P19

Procedure:Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)

The different plasmids we prepared received the following barcodes:

P19 (K4): FR11326649

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CG

Aim of the experiment: Re-Trafo of pSB1C3 RFP for later on: digestion, dephosphorylation and cloning

Procedure: transformation according to protocol of P4 E. Coli XL1

Result: plates (LB Cam) in incubator for further processing (37 °C)

Streptavidin refolding

Investigator: JB

Aim of the experiment: Refolding of denaturated Streptavidin

Procedure: After the pellet had almost completely dissolved in 6M GdmCl, the solution was spun down (4°C, 20 mins, 18,000 rpm). The supernatant was transferred carefully into a falcon tube and the pellet was cast away. Via a hydraulic pump (flow rate: 2x10 ml/min) the lysate was transferred Into 5L PBS 1x. Afterwards the pump was cleaned with technical isopropanol and ELGA water. The solution was stirred overnight at 4°C for refolding.

Biotinylation of BSA

Investigator: JB

Aim of the experiment: Biotinylation of BSA

Procedure: A 100 µM (=6.8 mg/ml) solution of BSA (Albumin fraction V, pH=7, in the fridge in the central lab) was created (V=10 ml). 220 µl of a 100 mM Biotin stock were added. The mixture was stored overnight Iin the fridge (4°C).

Result: Hopefully biotinylated BSA mixture in the fridge (4°C).

Friday, May 20th

Qualitative analysis of streptavidin expression

Investigator: CG

Aim of the experiment: SDS gel analysis of recombinant strepatividin expression

Procedure: mixing of 80 µl sample with 20 µl SDS buffer and heating at 95°C for 10 min. 1 h staining, 1 night unstaining

Result:

1. Lane: 8 µl Marker (Thermo Fisher #26610)
2. Lane: 12 µl culture aliquot, before induction
3. Lane: 12 µl culture aliquot, after induction
4. Lane: 3 µl culture aliquot of the lysed pelet, Strepatvidin expected at about 16 kDa
5. Lane: 3 µl culture aliquot of the supernatend after lysis, no Strepatvidin expected at about 16 kDa
6. Lane: 1.5 µl culture aliquot of the lysed pelet, Strepatvidin expected at about 16 kDa
7. Lane: 1.5 µl culture aliquot of the supernatend after lysis, no Streptavidin expected at about 16 kDa

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: LK

Aim of the experiment: Inoculation of pre-culture with E. coli XL1 (pSb1C3 -RFP) in LB-Chloramphenicol-medium

Procedure: Picking of colonies for E. coli XL1 (pSb1C3 -RFP) Inoculate in 5 ml LB-Chloramphenicol-medium Incubate at 37°C over night at 200 rpm

Transformation of Biobricks in XL1-blue

Investigator: NA, JH

Aim of the experiment: Transformation

Procedure: -10 µl dd H2O in well of interest (standard distribution kit) -1 µl Plasmid (out of well) to cells -Transformation according to the SOP Used bricks: K577893, B0015, R0040, B0032, I14033, K747096

Ammonium sulfate precipitation of streptavidin

Investigator: JB

Aim of the experiment: Reduction of the protein solution volume and precipitation of streptavidin

Procedure: The 5 L protein solution was spun down (20 mins, 5,000 rpm) and the supernatant transferred into a beaker. In order to lower the volume of the solution for ammonium sulfate precipitation, the solution was first filtered via a membrane crossflow pump (membrane: Sartocon 0.45 µm, thick membrane).

Dialysis of biotinylated BSA

Investigator: NA

Aim of the experiment: purification of biotinylated BSA

Procedure: dialysis against Tris/HCl 20 mM, pH 8, 10 mM NaCl over night; cut off : 14 kDa

Week 2 (May 23rd - May 29th)

Monday, May 23th

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CR

Aim of the experiment: Cloning of A3C5 and Avi-Tag into pSB1C3

Procedure:

MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen)
pSB1C3 was digested with AgeI and NgOMIV (10 µL plasmid + 1.5 µL AgeI + 1.5 µL NgoMIV + 3 µL CutSmart + 14 µL ddH2O; incubation for 1h, 37°C)
FastAP was added and the reaction was incubated for another 2h at 37°C
The digestion was purified by gelelctrophoresis (1%, 75V, 1h)
Plasmid backbone was cut from the gel

Results:

Signal 1: linearized pSB1C3 (successfull digestion)

Signal 2: supercoiled pSB1C3 (digestion not successfull)

Signal 3: RFP-generator

--> next time gel should run longer (just if you need the back bone)

Filtration of Streptavidin and precipitation with Ammonium-sulfate

Investigator: MP, CR

Aim of the experiment: Concentration of Streptavidin

Procedure: The solution was filtered via a membrane crossflow pump (membrane: Sartocon 0.45 µm, thick membrane). The final volum was 0.5L The solution was precipitated by addition of Ammonium-sulfate (2 steps: 1. 40% Ammonium-sulfate; 2. 70% Ammonium-sulfate) After the first addition of ammonium-sulfate the solution was stirred (1h, 4°C) Afterwards the solution was centrifuged (10.000 rpm; 30 min) and the supernatant was used for the second precipitation step The solution was stirred again (over night, 4°C)

Inoculation of pre-culture with BioBricks in pSB1C3 in LB-Cam

Investigator: JH, JL

Aim of the experiment:

Procedure: Add 50 µL chloramphenicol in 50 mL LB-medium Picking colonies from K577893; B0015; B0032 (in pSB1C3) * Inoculate 4 mL medium (CAM) Incubate at 37°C over night

Following cultures didn´t grow and were therefore not inoculated:

R0040; K747096; I14033

Retransformation of Biobricks in XL1-blue

Investigator: JH, JL, EF

Aim of the experiment: Transformation

Procedure: 10 µl dd H2O in well of interest (standard distribution kit) 1 µl Plasmid (out of well) to cells Transformation according to the SOP Used bricks: K577893, B0015, R0040, B0032, I14033, K747096

Tuesday, May 24th

Inoculation of pre-culture with BioBricks in pSB1C3 in LB-Cam

Investigator: CR

Aim of the experiment:

Procedure: Add 50 µL chloramphenicol in 50 mL LB-medium Picking colonies from K577893; B0015; B0032 (in pSB1C3) * Inoculate 4 mL medium (CAM) Incubate at 37°C over night

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CR

Aim of the experiment: Gelextraction of Signal 1 from pSB1C3-digestion

Procedure: Gelextraction was performed after manufacturer's protocol (Gelextractionkit, Qiagen)

Ammonium sulfate precipitation

Investigator: JB

Aim of the experiment: Precipitation the 70% saturated ammonium sulfate solution

Procedure: The ammonium sulfate solution, which actually was a suspension, was transferred into centrifuge tubes and spun down (10,000 rpm, 45 mins). As it turns out, unfortunately too much ammonium sulfate was used for the precipitation (wrong table). The precipitate was brought back into solution (20 mM Tris/HCl, pH 8.0) and loaded onto an SDS gel for analysis, along with other samples (flowthrough of the filtration from the day before).

MiniPrep of BioBricks in pSB1C3 (inoculated on May 23th)

Investigator: JH

Aim of the experiment: Extraction of BioBricks B0032, B0015 and K577893 in pSB1C3 from XL1 blue

Procedure: MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen) concentrations measured (in ng/µL): (B0032) 360.2; (B0015) 254.9; (K577893) 99.2

Sequencing of P23 (weak RBS), P24 (double terminator) & P24 (Tet repressed GFP)

Investigator: JH

Aim of the experiment: Sequencing of P23, P24 & P25 (x2)

Procedure: Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)

The different plasmids we prepared received the following barcodes:

P23 (VF2) : FR11326647
P24 (VF2) : FR11326646
P25 (VF2) : FR11326645
P25 (VR) : FR11326644

Wednesday, May 25th

Inoculation of pre-culture with tet-repressed GFP (P25) in LB-Cam

Investigator: NA

Procedure: Add 50 µL chloramphenicol to 50 mL LB-medium Picking colonies from plate (BL21) Incubate over night at 37°C => dismissed, because plasmid sequence was inaccurate

MiniPrep of K747096, I14033, R0040, B0015, K577893 and B0032

Investigator: CR

Aim of the experiment: MiniPrep of BioBricks

Procedure: MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen) Concentrations were measured (in ng/µL):

K747096: 286.2
I14033: 246.1
R0040: 243.5
B0015: 244.1
K577893: 440.9
B0032: 259.7

PCR of P19 (QC EspP) with O3 and O4

Investigator: CR

Aim of the experiment: Amplification of quickchanged EspP

Procedure:

reaction was performed after manufacturer's protocol (PCR Using Q5® High-Fidelity DNA Polymerase, NEB)
274,4 pg Plasmid were used for amplification (1 µL)
PCR program (standard):

Step	Temperature [°C]	Time [s]
initial Denaturation	98	30
35 cycles	98	10
	72	30
	72	60
final Extension	72	5
Hold	4	ꝏ

PCR product was purified accoding to manufacturer's protocol (PCR puification kit, Qiagen)
DNA was eluted 40 µL EB buffer

Digestion of PCR of EspP (P19 with O3 and O4)

Investigator: CR

Aim of the experiment: Digestion of EspP with AgeI and NgoMIV to ligate it in pSB1C3 later on

Procedure:

Batch for preparative digestion:

Volume	Reagent
38.5 µL	PCR product P19 with O3 and O4
1 µL	AgeI
1 µL	NgoMIV
5 µL	CutSmart buffer
4.5 µL	ddH₂O
50 µL	TOTAL

Incubation for 2 h at 37 °C

Sequencing of P26 (CMV promotor), P27 (p cat promotor), P28 (Tet repressible promotor), P30 (Tet repressed GFP)

Investigator: NA

Aim of the experiment: Sequencing of P26, P27, P28 & P30 (x2)

Procedure: Sequencing batches were prepared after manufacturer's protocol (15 μL plasmid DNA (50-100 μM) and 2 μL sequencing primer) The different plasmids we prepared received the following barcodes: P26 (VF2) : FR11326643 P27 (VF2) : FR11326642 P28 (VF2) : FR11326641 P30 (VF2) : FR11326640 P30 (VR): FR11326639

Ion exchange chromatography of eGFP

Investigator: NA, JB,JL

Aim of the experiment: purification of eGFP

Procedure:

use Äkta-Purifier (Q-column for eGFP (quarternary ammonium as stationary phase)). Ask Andy before use!
Pump A: running buffer (20 mM Tris/HCl pH 8); pump B: elution buffer (20 mM Tris/HCl pH 8 and 1,000 mM (1 M) NaCl
basic pumpwash before start
injection in loop
gradient of ion strength on column.

Results: Elution of eGFP at ~200 mM NaCl.

Thursday, May 26th

Inoculation of cultures with XL-1 F11 and F12 clones

Investigator: JB

Aim of the experiment: Inoculation of a 5 ml culture with a clone of the previously transformed F11 (Avi-Tag) F12 (Antibody-binding site).

Cloning of ligation F14 +F13

Investigator: MP, EF, JH

Aim of the experiment: new biobrick EspP in pSB1C3

Procedure: F14 was purified by gelelctrophoresis (1%, 90 V, 40 min) gelextraction was performed after manufacturer's protocol (Gelextractionkit, Qiagen) ligation of F14 (EspP) with F13 (dephos. PSB1C3) transformation according to protocol in competent E.coli XL1 blue

Results:

Transformation of Biobrick B0034 in XL1-blue

Investigator: JH

Aim of the experiment: Transformation

Procedure:

10 µl ddH2O in well of interest (standard distribution kit, plate 4, well 1N)
1 µl Plasmid (out of well) to cells
Transformation according to the SOP (incl. rescue)

Transformation of Biobricks K577895 and K577894 in XL1-blue

Investigator: NA

Aim of the experiment: Transformation

Procedure:

10 µl ddH2O in well of interest (standard distribution kit, plate 1, wells 14B / 12P)
1 µl Plasmid (out of well) to cells
Transformation according to the SOP (incl. rescue)

SDS-PAGE of eGFP-fractions after IEC

Investigator: NA, CG

Procedure: mixing of 80 µl sample with 20 µl SDS buffer and heating at 95°C for 10 min. 1 h staining, 1 night unstaining Concentrations were measured via nanodrop (A280, extinction coefficient: 55000 M−1cm−1)

Result: concentrations in mg/ml 1. Lane: 8 µl Marker 2. Lane: 10 µl of fraction 10; c= 0 3. Lane: 10 µl of fraction 11; c= 0,15 4. Lane: 10 µl of fraction 12; c= 0,77 5. Lane: 10 µl of fraction 13; c= 0,29 6. Lane: 10 µl of fraction 14; c= 0,4 7. Lane: 10 µl of fraction 15; c= 0,144 8. Lane: 10 µl of fraction 16; c= 0,085

$Muc16 SDS-PAGE of eGFP-fractions after IEC.png$

eGFP is clearly detectable at about 27 kDa. The most pure fractions 12 and 13 were pooled for later biotinylation.

Friday, May 27th

Inoculation of pre-cultures with B0034 (strong RBS), K577894 (Tet repressed YFP), KK577895 (Tet repressed RFP), F13+F14

Investigator: JH

Procedure:

Add 50 µL ampicillin(B0034)/chloramphenicol(K5777894, K577895, F13+F14) to 50 mL LB-medium
Picking colonies from plate (XL1 blue; all rescue)
Incubate over night at 37°C

Inoculation of BL21 (pASK75 (SA1)) culture in 2 L TB-Medium and induction of streptavidin production by addition of tetracycline

Investigator: NA

Aim of the experiment: Production of streptavidin

Procedure:

Ampicillin (2 mL) was added to the Medium (1:1000)
The pre-culture (50 mL) was poured into the Medium
Culture was incubated at 37°C and 140 rpm until OD550 reached 0.5
To induce streptavidin expression anhydro-tetrazycline (200 µL) was added to the culture (1:10000)
The culture was incubated at 37°C and 140 rpm for 4 hours

Result: Streptavidin expression by BL21

Re-sequencing of P30 (Tet repressed GFP in pSB1C3)

Investigator: NA

Aim of the experiment: Purification and sequencing of P30

Procedure:

P30 was heated up to 100 °C and centrifugated afterwards to remove proteins from Promotor (if there are some), the supernatant is sequenced
Sequencing batches were prepared after manufacturer's protocol

(15 μL plasmid DNA (50-100 μM) and 2 μL sequencing primer)
The different plasmids we prepared received the following barcodes:
- P30 (VF2) : FR11326638

Expression and harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB-medium

Investigator: JH, NA

Aim of the experiment: Recombinant expression and purification of Streptavidin

Procedure:

After expression, cultures were transferred into centrifuge tubes and spun down in the centrifuge (4°C, 5000 rpm, 20 mins, F 4X1L rotor)
The supernatant was cast away and the pellet was stored at –20 °C

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CG

Aim of the experiment: MiniPrep of cloned pSB1C3-A3C5 and –AviTag Plasmids

Procedure:

MiniPrep of inoculated precultures was performed according to manufacturer’s protocol (QIAprep MiniPrep, Qiagen)
Concentrations were measured (in ng/µL):

Colony 1 of pSB1C3- AviTag P32: 120 Colony 2 of pSB1C3- AviTag P33: 110 Colony 1 of pSB1C3-A3C5 P34: 126 Colony 2 of pSB1C3-A3C5 P35: 188

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: NA, JH, CG

Aim of the experiment: Initial vector digestion was performed with NgoMiV and AgeI, producing complementary overhangs. Religated pSB1C3 (due to incomplete vector dephosphorylation) loses the AgeI recognition sequence. Therefore plasmids without insert should run in the supercoiled position at about 1.5 kb, plasmids with inserts should run in the linearised position at 3 kb. Single enzyme digestion was chosen, because the insert is too small to be solved on a gel.

Procedure:

analytic digestion: 3 µl of plasmid DNA P32 to P35 (about 300 ng) were digested with 0.3 µl AgeI-HF in 1 µl CutSmart Buffer and 5.7 µl H2O. The reaction was incubated for 2 h at 37°C.
5 µl digestion mix were loaded on a 1% agarose gel for electrophoresis, 1 kb ladder

Result:

P32 to P35 might carry the insert because they all appear in the linearized position at 3 kb
Therefore plasmid sequencing should confirm the result.

Lane 1: 1 kb ladder Lane 3: P32 Lane 4: P33 Lane 5: P34 Lane 6: P35

Week 3 (May 30th - June 5th)

Monday, May 30th

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CR

Aim of the experiment: Sequencing of P32 and P35

Procedure:

Sequencing batches were prepared according to manufacturers protocol (Mix2Seq Kit, Eurofins Genomics): 15 μL plasmid DNA (50-100 μM) and 2 μL sequencing primer (10 µM)

The plasmids received the following barcodes:
- P32 (VF2) : FR11326637
- P35 (VF2) : FR11326636

Religation of F13 (digest of pSB1C3 with AgeI and NgoMIV) and transformation in XL1 blue

Investigator: CR

Aim of the experiment: Re-ligate digested and dephosphorylated pSB1C3 and transformation in XL1blue

Procedure:

Plasmid was ligated with the T4 DNA Ligase following the manufacturer’s protocol (NEB)
52 ng Vector DNA were used
The Ligation mix was incubated for 30 min at RT
7 μL Ligation mixed were used for the transformation of 50 μL XL1 blue.
Transformation was performed following the SOP

Result:

5 clones on plate

Inoculation of pre-cultures with B0034 (strong RBS), K577894 (TET repressed YFP), KK577895 (Tet repressed RFP), F13+F14

Investigator: CR

Procedure:

Add 50 µL ampicillin(B0034)/chloramphenicol(K5777894, K577895, F13+F14) to 50 mL LB-medium
Picking colonies from plate (XL1 blue; all rescue)
Incubate over night at 37°C

Tuesday, May 31th

Dialysis of eGFP

Investigator: NA

Aim of the experiment: Changing the buffer of eGFP for biotinylation (from TRIS to PBS)

Procedure:

eGFP was poured in a dialysis hose (cut-off 14 kDa)
The hose was then placed in ice cold PBS pH 7.4
The dialysis took place at 4°C overnight

Expression and harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB-medium

Investigator: JB, NA

Aim of the experiment: Recombinant expression and purification of Streptavidin

Procedure:

The pellet was transferred into a beaker of sufficient size and resuspended in fridge-cooled Tris Buffer B (50 mM Tris/HCl (pH = 8.0), 1 mM EDTA)
The solution was homogenized in the PANDA (see SOP)
The resulting lysate was transferred into centrifuge tubes and spun down (4°C, 18,000 rpm, 30 mins, SS34-rotor). The supernatant was cast away and the pellet was resuspended in 6M Gua-HCl (pH = 1.5) at 4°C overnight.

Transformation of P30 (Tet repressed GFP)

Investigator: NA

Aim of the experiment: expression of tet-repressed GFP in E. Coli BL21

Procedure: transformation in competent E. Coli BL21 according to protocol

Result: plates (LB Cam) in incubator for further processing (37 °C)

Cloning of A3C5 and Avi-Tag into pSB1C3

Investigator: CR, JH

Aim of the experiment: Preculture of pSB1C3 (F13+F14) was red See if RFP-generator is still inside the pSB1C3 See if ligation of EspP was successful

Procedure:

MiniPrep of P39 was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen)
pSB1C3 was digested with AgeI and NgOMIV (1.5 µL P39 + 1.5 µL AgeI + 1.5 µL NgoMIV + 3 µL CutSmart + 22.5 µL ddH2O; incubation for 2h, 37°C)
FastAP was added and the reaction was incubated for another 10min at 37°C
FastAP was inactivated by heating the mix to 75°C for 10min.
The digestion was purified by gelelctrophoresis (1%, 75V, 1h)

Results:

Unknown signals. Repeat transformation, digestion, dephosphorylation and ligation of pSB1C3

Re-transformation of P4 (pSB1C3 (RFP-generator)) in XL1 blue

Investigator: JH, CR

Aim of the experiment: Transformation

Procedure:

2 μL P4 were used for transformation of XL1 blue
Transformation was performed according to SOP (incl. rescue plate)

Competent E. coli XL1 cells

Investigator: JB

Aim of the experiment: Generation of competent E.coli XL1 cells

Procedure:

5 ml LB w.o. antibiotics (sterile)
Inoculation of one colony of E.coli XL1 cells
Incubate overnight at 37°C

Wednesday, June 1th

eGFP Biotinylation

Investigator: CG

Aim of the experiment: Biotinylation of dialysed eGFP past IEC

Procedure:

The average concentration of the pooled factions 12 and 13 should be about 0.5 mg/ml (=19 µM)
10 ml of a 100 mM Biotin stock-solution was prepared (340 mg)
3.5 ml of eGFP were biotinylated with 12 µl 100 µM Biotin-solution (20x molar excess)
Incubation at 4 °C overnight

pSB1C3 vector backbone preperation

Investigator: CG

Aim of the experiment: Inoculation of two colonies pSB1C3-RFP Generator

Procedure:

2x 5 ml LB+Cam medium (1:1000)
Picking colonies from plate (XL1 blue, rescue)
Incubate overnight at 37°C

Generation of GFP expressing E. coli cells

Investigator: CG

Aim of the experiment: Inoculation of BL21 transformed cell with P30

Procedure:

50 ml LB+Cam medium (1:1000)
Picking colonies from plate (BL21, rescue)
Incubate over night at 37°C

Competent E. coli XL1 cells

Investigator: JB

Aim of the experiment: Generation of competent E. coli XL1 cells

Procedure:

Inoculated 500 µl preculture in 50 ml LB media w.o. antibiotics
Incubated and shaken at 37°C until the OD550 reached 0.44
Transferred into a falcon tube and incubated on ice for 10 mins
Spun down at 3000 g for 10 mins at 4°C, supernatant cast away
Pellet resuspended in 40 ml fridge-cooled MgCl2 (100 mM), once again spun down at 4°C for 10 mins at 3000 g
Supernatant cast away, pellet resuspended in 20 ml cold CaCl2 (50 mM)
Incubation on ice for 30 mins
Centrifugation repeated, supernatant cast away
Pellet resuspended in 2 ml of CaCl2 (50 mM) and glycerol (15%)-solution, aliquoted (50 µl each), frozen in liquid nitrogen and stored at -80°C for further use

Cloning of Pcat-RBS-construct in pSB1A2

Investigator: CG, JH, CR

Aim of the experiment: Pcat (I14033) was cut out of P27 and ligated into P38 for generating the Pcat-RBS (B0034) construct.

Procedure:

P27 was digested with EcoRI and SpeI (4 µL P27 + 1.5 µL EcoRI + 1.5 µL SpeI + 3 µL CutSmart + 20 µL ddH2O; incubation for 2h, 37°C)
P38 was digested with EcoRI and XbaI (10 µL P27 + 1.5 µL EcoRI + 1.5 µL XbaI + 3 µL CutSmart + 14 µL ddH2O; incubation for 2h, 37°C)
Preperative gel electrophoresis was performed
For P27 the signal at about 50 bp was cut out and gel extracted according to manufacturer's protocol (Gelextractionkit, Qiagen): 5.9 ng/µl
For P30 the signal at about 2.1 kb was cut out and gel extracted according to manufacturer's protocol (Gelextractionkit, Qiagen): 8.9 ng/µl
Ligation according to SOP

Purification of streptavidin

Investigator: JB

Aim of the experiment: Refolding denaturized streptavidin

Procedure:

the GdmCl-solved streptavidin was spun down using an SS-34 rotor (~60 min, 18,000 rpm, 4°C)
The supernatant containing the solved and denaturized protein was transferred into a falcon tube, the pellet cast away
The protein solution was slowly dripped into 4 l of cooled 1x PBS (in the 4°C room) using a hydraulic pump and stirred overnight

Tuesday, June 2th

Preparation of pSB1C3 for further use

Investigator: CR

Aim of the experiment: Digestion of pSB1C3 to remove RFP-generator

Procedure:

MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen)
P40 was digested with AgeI and NgOMIV (2.5 µL P40 + 1.5 µL AgeI + 1.5 µL NgoMIV + 3 µL CutSmart + 21.5 µL ddH2O)
Incubation over night at 37°C

Generation of GFP expressing E. coli cells

Investigator: CG, JH

Aim of the experiment: Various inductor concentrations

Procedure:

12x 5 ml LB+Cam media were inoculated with 50 µl preculture
when cultures reached OD550 of 0.5, they were induced with tetrazycline-anhydride of various concentrations (0 ng/µl, 20 ng/µl, 40 ng/µl etc., 200 ng/µl)
t=0, =30, =90, =150, =210, =270 a 100 µl aliquot of each culture was stored at 4 °C in the refrigerator

Dialysis of biotinylated eGFP

Investigator: JH, JB

Aim of the experiment: Purification of biotinylated eGFP

Procedure:

eGFP was poured in a dialysis hose (cut-off 14 kDa)
The hose was then placed in 2 L ice cold Tris/HCl 20 mM pH 8.0
The dialysis took place at 4°C over night

Ligation of F17.1 (p(cat)) and F18 (stron RBS) and transformation in XL1 blue

Investigator: JH

Aim of the experiment: Ligation and transformation in XL1blue

Procedure:

Plasmid was ligated with the T4 DNA Ligase following the manufacturer’s protocol (NEB)
9 µL F18 (B0034 in pSB1A2; RBS) and 1 µL of F17.1 (I14033; P(cat)) were used [AmpR]
The Ligation mix was incubated for at least 2h at RT
7 μL Ligation mixed were used for the transformation of 50 μL XL1 blue
Transformation was performed following the SOP [AmpR], incl. rescue plate

Friday, June 3th

Cloning of F8 (A3C5), F9 (Avi-Tag) and F14 (EspP) into F20

Investigator: CR

Aim of the experiment: Cloning of A3C5, Avi-Tag and into pSB1C3

Procedure:

FastAP was added and the digestion of F20 and was incubated for another 15 min at 37°C
The digestion was purified by gelelctrophoresis (1%, 75V, 1h)
Plasmid backbone (signal 1) was cut from the gel
Gelextraction was performed after manufacturer's protocol (Gelextractionkit, Qiagen)

Results:

Signal 1: F20

[F20]= 13,8 ng/μL

Generation of GFP expressing E. coli cells

Investigator: CG, NA

Aim of the experiment: SDS PAGE for verification of successful GFP expression

Procedure:

SDS electophoresis according to SOP
Lane 1: #12, 90 min
Lane 2: #12, 150 min
Lane 3: #12, 210 min
Lane 4: #12, 270 min
Lane 5: 8 µl

Results:

Inoculation of colonies from F19 (pcat-strong RBS)

Investigator: CG

Aim of the experiment: three colonies were picked from yesterdays transformation

Procedure:

3x 5 ml LB+Amp media
Each culture was inoculated with one colony
Incubation at 37°C overnight

Cloning of F8 (A3C5), F9 (Avi-Tag) and F14 (EspP) into F20 (pSB1C3)

Investigator: CG

Aim of the experiment: Ligation of F21, F22 and F23 into F20 and transformation

Procedure:

Ligation was performed according to the SOP with: 0.7 µl F8 (1:10) / 9.3 µl F20, 0.7 µl F9 (1:10) / 9.3 µl F20, 9.1 µl F14 / 0.9 µl F20
Transformation was performed according to the SOP on LB Cam-Agar

Precipitation of Streptavidin

Investigator: NA, JB, LK

Aim of the Experiment: Purification of Streptavidin

Procedure:

Slowly add (NH4+)2SO42- until the concentration reaches 40% (23,1 g/100mL) while stirring
Let it stir over night to ensure complete precipitation
Centrifuge at 8500 rpm at 4°C for 15min (rotor: SLA1500), dismiss the pellet and use the supernatant for further processing
Slowly add (NH4+)2SO42- until the concentration reaches 70% (19,1 g/100mL) while stirring
Let it stir over night (slowly to avoid foaming)
Centrifuge at 8500 rpm at 4°C for 15min (rotor: SLA1500), dismiss the supernatant and use the pellet for further processing
Resuspend the protein pellet in a minimum volume of TRIS/HCl; pH 8; 20mM (NO SALT) (6 mL per pellet), the pellets where then united and titrated with Buffer until the solution became clear. Total amount of buffer: 40mL
Transfer to 50 mL Falcon Tubes and centrifuge at full speed for 15 min. Filter the supernatant through 45nm sterile filter and keep the pellet (rescue).

Saturday, June 4th

Inoculation of colonies from F21 (pSB1C3 (A3C5)), F22 (pSB1C3 (Avi-Tag)), F23 (pSB1C3 (EspP))

Investigator: NA

Aim of the experiment: three colonies were picked from each transformation

Procedure:

3x 5 ml LB+Cam media for each fragment
Each culture was inoculated with one colony
Incubation at 37°C overnight

MiniPrep of F19 (pSB1A2 (pcat-strong RBS))

Investigator: NA

Aim of the experiment: Extraction of Ligation: F17+F18 (starke RBS+P(cat))

Procedure: MiniPrep was performed after manufacturer's protocol (QIAprep MiniPrep, Qiagen) Concentrations: K1= 66,2 ng/µl; K2= 60,2 ng/µl; K3= 104,4 ng/µl

Week 4 (June 6th - June 12th)

Monday, June 6th

Cloning of TetR from p28 into p31 (pSB1C3(weak RBS))

Investigator: LK, JH, NA

Aim of the experiment: Cloning TetR in front of weak RBS in pSB1C3

Procedure:

Digestion of p28 with EcoR1 and Spe1 (20µl DNA, 2,5 µl each enzyme, 5µl CutSmart buffer, 20µl ddH2O) and p31 (4µl DNA, 1µl EcoRI / XbaI, 2µl, 12µl DNA) -> Incubation at 37°C for 2h.
Electrophoresis: 1% Agar, 15 min , 70 V (oben p31 und p41, unten p28)

Gelextraction concentrations: p28 (F25) = 2,3 ng/µl

p31 (F24) = 7,8 ng/µl

Ligation with 6,3 µl vector (F24) and 1,7 µl Insert (F25) + 1µl Buffer + 1µl Ligase over night, 16°C

SDS-PAGE of Streptavidin

Investigator: NA, JH, LK

Procedure: mixing of 80 µl sample with 20 µl SDS buffer and heating at 95°C for 10 min. 1 h staining, 1 night unstaining. Concentration of streptavidin was measured via UV/VIS spectroscopy.

c = 23,5 mg/ml

Result:

1. Lane: 8 µl Marker
2. Lane: 5 µl of Streptavidin_1:10
3. Lane: 5 µl of Streptavidin_1:50
4. Lane: 5 µl of Pellet_1:500
5. Lane: 5 µl of after 40% precipitation_1:10
6. Lane: 5 µl of supernatant after 70% precipitation and centrifugation

Successful Streptavidin production verified.

Sequencing of P41 (pSB1C3 (strongRBS-p(cat)))

Investigator: NA

Aim of the experiment: Sequencing of P41

Procedure: Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (100 ng/ µl) and 2 µL sequencing primer (VF2))

The plasmids prepared received the following barcode:

P41 : FR11326633

Tuesday, June 7th

Transformation of P30 (Tet repressed GFP), P36 (Tet repressed RFP), P37 (Tet repressed YFP)

Investigator: NA

Aim of the experiment: Transformation of RFP, GFP and YFP in BL21

Procedure: transformation in competent E. Coli BL21 according to protocol + rescue

Result: plates (LB Cam) in incubator for further processing (37 °C)

MiniPrep of P42 to P50, analytic digestion, sequencing

Investigator: CG

Aim of the experiment: Verification of successful cloning

Procedure: MiniPrep was performed according to manufacturer's protocol (QIAprep MiniPrep, Qiagen)

Concentrations (ng/µl each) for P42: 260, P43: 247, P44: 181, P45: 118, P46: 261, P47: 135, P48: 148, P49: 240, P50: 299
Analytic digestion: 0.3 µl AgeI, 2 µl CutSmart, 6.7 µl H2O for P42, P43, P44, P45, P46, P49, P50 and 0.3 µl EcoRI, 0.3 µl PstI, 2 µl CutSmart, 6.4 µl H2O for 2 h at 37°C
1% agarose gel electrophoresis
Sequencing: P42= FR11326632 (VF2), P45 =FR11326631 (VF2)

Results:

Lane 1: 5 µl 1 kb Ladder
Lane 2-10: Digestion of P42 to P50. P47 and P48 are carrying the insert. All other plasmids are religated and lost their AgeI site, hence they run in the ccc position.

Dialysis of not biotinylated eGFP

Investigator: NA

Aim of the experiment: Purification of eGFP for mass determination

Procedure:

eGFP was poured in a dialysis tubes
The tubes were then placed in ice cold ammonium acetate
The dialysis took place at 4°C over night

Polymerisation attempts

Investigator: JH, CR, CG, JB

Aim of the experiment: Identification of optimal polymerisation conditions for biotinylated eGFP and BSA in a Streptavidin reservoir

Procedure:

variate of compositions for both solutions was examined to modify density properties during “printing”
all compositions can be found in excel sheet

Results:

no or little successful polymerization at Streptavidin concentrations of 4 mg/mL and below; immense density incompatibilities
sucessfull polymerization at Streptavidin concentrations of 10 mg/mL and BSA solution with approx. 15% glycerol
no success with biotinylated eGFP (too few Biotin molecules?!)

Wednesday, June 8th

Sequencing of P36 (Tet repressed RFP) and P37 (Tet repressed YFP)

Investigator: NA

Aim of the experiment: Sequencing of P36 and P37 in both directions

Procedure: Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)

The different plasmids we prepared received the following barcodes:

P36 (VF2): FR11326630
P36 (VR): FR11326629
P37 (VF2): FR11326628
P37 (VR): FR11326627

Dialysis of Streptavidin

Investigator: NA, JH

Aim of the experiment: Purification of Streptavidin (possible ammonium sulfate contamination after precipitation)

Procedure:

Streptavidin was poured in a dialysis hose (cut-off 14 kDa)
The hose was then placed in 3 L ice cold Tris/HCl 20 mM pH 8.0 (no salt)
The dialysis took place at 4°C over night

Polymerisation attempts

Investigator: JH, JB

Aim of the experiment: Identification of optimal polymerisation conditions for biotinylated BSA in a Streptavidin reservoir

Procedure:

variate of compositions for both solutions was examined to modify density properties during “printing” (Streptavidin at 10 mg/mL or higher)
all compositions can be found in excel sheet

Thursday, June 9th

Generation of GFP, YFP, RFP expressing E. coli cells

Investigator: CG

Aim of the experiment: Various inductor concentrations, various fluorescent proteins were expressed in E coli cells

Procedure:

3x 5 ml LB+Cam media were inoculated with 50 µl preculture of GFP (P30), RFP (P36), YFP (P37)
when cultures reached OD550 of 0.5, they were induced with anhydro-tetrazycline of various concentrations (0 ng/µl, 100 ng/ml, 200 ng/ml)
50 ng/ml = 12,5 µl of 1:100 2 mg/ml stock solution, 200 ng/ml = 50 µl of 1:100 2 mg/ml stock solution
t=0, =4 h and stored on ice

Resuts: no fluorescent could be detected. Therefore an overnight induction at 37°C with 1 µM/ml inductor concentration was performed with the RFP plasmid.

Biotinylation of GFP expressing E. coli cells

Investigator: CG

Aim of the experiment: Biotinylation of P30 carrying E. coli cells

Procedure:

850 µl P30 preculture from Thursday 2nd were centrifuged and the supernatend was discarded
Pellet was resuspended in 800 µl PBS-buffer
100 µl 100 mM Biotin-NHS was added
incubation for 4 h at room temperature
Experimenting with some glycerol and streptavidin concentrations. A more structured approach will be done the next day.

Results: A shape thin “sausage” could be detected. Therefore a bigger E. coli culture was biotinylated at 4°C overnight for experimenting with the next day.

Cloning of TetR promotor and weak RBS in pSB1C3

Investigator: CR, JB

Aim of the experiment: MiniPrep and NanoDrop of F26 K1, K2 and K3 Sequencing of P51

Procedure: MiniPrep was performed according to manufacturer's protocol (QIAprep MiniPrep, Qiagen) Concentrations were as following:

P51: 163,3
P52: 151,7
P53: 140,5

P51 was sequenced:

1. with VF2: FR11326626
2. with VR: FR11326625

Biotinylation of eGFP

Investigator: VL, JB

Aim of the experiment: Biotinylation of eGFP with 200x biotin-NHS molar excess over eGFP (15x excess over surficial K residues). NB: previous trial unsuccessful. Excess of biotin was likely insufficient to ensure efficient biotinylation, esp. since biotin-NHS slowly hydrolyzes in the aqueous environment.

Procedure: 1 ml of eGFP was biotinylated with an 200x excess of biotin in DMF (100 uM; 38 uL), 5.5 h at rt. The solution was dialysed versus 20 mM Tris/HCl pH 8 overnight at 4 °C.

PCR of gene syntheses

Investigator: LK

Aim of the experiment: Amplification od iGEM_1_SA-m1 (F27), iGEM_1_mRuby_EGFR (F28) and iGEM_2_IRES-BirA (F29)

Procedure:

Add 100µl of ddH2O to the gene sythesis samples and incubate for 20 min at 50°C
Dilute samples to a final concentration of max. 1ng/µl (1:10) with water.
Approach:

1µl DNA (diluted)

5µl buffer

0,5µl dNTPs

1,25µl forward Primer VF2

1,25µl reverse Primer VR

0,25µl Q5 Polymerase

Fill up with water up to 25µl

Make sure to pipette everything on ice and add the polymerase at the end
Setup: (calculated with NEB calc. http://tmcalculator.neb.com/#!/)

98°C_1min initiation step

98°C_10sec

66°C_30sec > step 2-4: 35 repeats

72°C_30sec

72°C_2min final step

4°_hold

The samples were then prepared with the PCR Product Purification Kit

Polymerisation experiments for biotinylated eGFP and BSA with Streptavidin

Investigator: JH, CR, JB

Aim of the experiment: Determination of ideal concentrations for both protein interaction partners as well as buffer viscosity (glycerol content etc.) for polymerisation in a test tube

Procedure:

Different concentrations of proteins and glycerol were tested to support stable polymerisation without protein aggregates rising to the surface or sinking to quickly
The experiments done are not going to be further documented as the streptavidin used for the experiments was previously determined in a wrong fashion and was actually considerably lower than expected (4x lower). Streptavidin was, due to that circumstance, concentrated to be able to support experiments with at least 5 mg/ml concentrations
First experiments with concentrated streptavidin seemed promising, though a complete series of experiments with varying parameters should be conducted in the future

Sequencing of P29 (pSB1C3 (double terminator), P36 (pSB1C3 (Tet repressed RFP)) and P37 (pSB1C3 (Tet repressed RFP))

Investigator: JB

Aim of the experiment: Sequencing of P29, P36 and P37

Procedure: According to the manufacturer's protocol.

P29: FR11326624 (VF2)
P36: FR11326623 (VF2)
P37: FR11326621 (VR), FR11326622 (VF2)

Inoculation of (pre)cultures for a pSB1C3 midiprep

Investigator: JB, VM

Aim of the experiment: Massively amplifying the pSB1C3 vector (which will be needed for building up new biobricks) by midiprepping the P40 plasmid (RFP-generator in pSB1C3). Similar to minipreps, but on a greater scale. Procedure: 3 ml precultures were inoculated with a clone from the plate previously used for minipreps. After the precultures had grown for 4 hours (due to shortage of time), 2 x 50 ml cultures were inoculated and shaken overnight at 37°C. The next day, cultures were put into the fridge for storage until Monday.

Week 5 (June 13th - June 19th)

Monday, June 13th

Digestion of gene synthesis iGEM1 and iGEM2

Investigator: LK, JH

Aim of the experiment: Digest F28 (iGEM1) and F29 (iGEM2) in order to ligate them into P40, which was equally digested (to get rid of the rfp-generator and have pSB1C3 as backbone)

Procedure:

30µl of F28 were digested for 3h with SpeI and NgoMIV, and 30 µl of F29 were digested with XbaI and PstI
2 x 20 µl where digested with the equivalent enzymes for 3h
After electrophoresis the bands were cut out and purified

Results: Results show that PCR of F28, F29 might not have worked. P40 was extracted from gel (F30 and F31). PCR of gene synthesis was repeated (50µl!)

Midiprep of P40

Investigator: LK

Aim of the experiment: Purification of P40 from

Procedure:

See protocol of Midiprep kit
1xuse-centrifugation-columns broke in centrifuge during last step, DNA rescue was tried by resuspending rest of the solution in the tube in EB buffer and redo the last steps (isoprop and ethanol precipitation)
Airdry "pellet"(no pellet visible) for 15 min under fume hood and resuspend in 100µl EB Buffer
Measure concentration with nanodrop

Preparation of Collagen + Biotinylation

Investigator: VL, JL

Aim of the experiment: prepare collagen solution + biotinylate small sample

Procedure:

Dissolve 5 g collagen in 50 mL Tris/HCl pH 8 20 mM w/o salt --> 770 uM solution (100 mg/mL)
Sterile filter
Biotinylation: 980 uL Tris buffer + 20 uL collagen solution + 30 uL biotin-NHS (100 mM in DMF, 200x molar excess over collagen monomers)
Reaction time:
Dialyze 4 °C Tris/HCl pH 8 20 mM w/o salt o/n

Transformation of P9 (pASK75)

Investigator: JL, VL

Aim of the experiment: transform streptavidin expression vector P9 (clone 4) into E. coli BL21

Procedure:

Standard (see booklet): 45 s at 42 °C; incubate 1h, 37°C; plate: medium w. chloramphenicol (+ rescue plate) Incubate o/n 37°C.
Wrong antibiotic plate, repeated the next day of the experiment: Massively amplifying the pSB1C3 vector (which will be needed for building up new biobricks) by midiprepping the P40 plasmid (RFP-generator in pSB1C3). Similar to minipreps, but on a greater scale.

Tuesday, June 14th

Mass spectrometry of biotinylated eGFP

Investigator: CR

Aim of the experiment: identify biotinylation degree of eGFP

Procedure:

[generic_display_report] (i could not upload this file, sorry.)

Results: about 4-5 biotins per protein. To verify the biotinylation degree the unbiotinylated eGFP will be measured.

Cloning of F32 (PCR iGEM_1 mRuby-EGFR) and F33 (PCR iGEM_2 IRES-BirA) in pSB1C3

Investigator: CR

Aim of the experiment: Purification of PCR products

Procedure:

Volume of PCR reaction: 50 µL
PCR products were purified by manufacturers protocol (QIAquick PCR purification kit, Qiagen)
Concentration measured by Nanodrop:
F32: 87,5 ng/µL
F33: 68,3 ng/µL
Test if PCR worked:
Samples were applied on a 2% agarose gel and was run at 80 V for 40 min.

Results:

PCR of F28 worked --> F32
PCR of F29 did not work --> wrong primers were used for amplification --> F33 not right (Re-Do PCR with appropriate primers

Cloning of F32 (PCR iGEM_1 mRuby-EGFR) and F33 (PCR iGEM_2 IRES-BirA) in pSB1C3

Investigator: CG

Aim of the experiment: Digestion of F32 (SpeI, NgoMIV) and F33 (XbaI, PstI)

Procedure:

Digestion F32: 27 µl of F32 (2.4 µg), 5 µl CutSmart Buffer, 1.5 µl SpeI, 2 µl NgoMIV, 14.5 µl H2O
Digestion F33: 27 µl of F32 (1.8 µg), 5 µl CutSmart Buffer, 1.5 µl XbaI, 1.5 µl PstI, 15 µl H2O
Incubation for 3 h at 37°C
Preperative gel:

Gelextraction of F32 upper band and F32 lower band was executed by manufacturers protocol (Qiagen)
F32 upper band (mRuby) was named F34 (=10 g/yl)
F32 lower band (eGFR) was named F35 (=6 ng/yl)

Cloning of F32 (PCR iGEM_1 mRuby-EGFR) and F33 (PCR iGEM_2 IRES-BirA) in pSB1C3

Investigator: CR

Aim of the experiment: Ligation of F34 (mRuby) and F35 (eGFR) in F30 (pSB1C3); Tranformation in XL1blue

Procedure:

Ligation mixtures were prepared as following:
F34: 8.0 μL F34, 2 μL F30, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase)
F35: 7.6 μL F35, 2.4 μL F30, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase)
Ligation was incubated for 30 min at RT

[something is missing here]

Re-Sequencing of P37 (Tet repressed YFP)

Investigator: CG

Aim of the experiment:

Purification and sequencing of P30

Procedure:

P30 was heated up to 100 °C and centrifugated afterwards to remove proteins from Promotor (if there are some), the supernatant is sequenced
Sequencing batches were prepared after manufacturer's protocol
(15 μL plasmid DNA (50-100 μM) and 2 μL sequencing primer)
The plasmid we prepared received the following barcode: P37 (VF2) : FR11326620

Streptavidin expression

Investigator: CR

Aim of the experiment: Transformation of P9 (pASK74 (SA1)) in BL21

Procedure:

Transformation was executed following SOP
Transformed cells were plated on LB medium (Amp) (50 µL and rescue (50 µL)

Dialysis of Streptavidin and biotinylated BSA

Investigator: CR

Aim of the experiment: Streptavidin and bitinylated BSA are both in Tris/HCl without salt. SInce we will perform later experiments in salty solutions the dialysis was performed against 137 mM NaCl (Saltconcetration of PBS)

Procedure:

3 L Tris/HCl NaCl solution was prepared
Dialysis was prepared according to SOP
Cut off Dialysis hose: 14 kDa

Inoculation of (pre)cultures of P40 for a pSB1C3 midiprep [repeat]

Investigator: JH

Aim of the experiment: Massively amplifying the pSB1C3 vector by midiprepping the P40 plasmid (RFP-generator in pSB1C3)

Procedure: four 4 ml precultures were inoculated with a clone from the plate previously used for minipreps. After the precultures had grown for 6 hours, 50 ml cultures were inoculated and shaken overnight at 37°C.

Subcloning of P41 (strong RBS-p(cat)) Insert into pSB1C3

Investigator: JH

Aim of the experiment: Moving P41 (pSB1A2; Pcat+weakRBS) to pSB1C3 for biobrick submission

Procedure:

Digestion of P41 with XbaI and PstI (10 µl DNA, 1,5 µl each enzyme, 3 µl CutSmart buffer x10, 14 µl ddH2O) -> Incubation at 37°C for 2h.
Electrophoresis: 2% Agar, 40 min , 90 V (1kb ladder, empty, P41, 100b ladder)
GelExtraction

Resuts: no visible signal of insert at approx. 100b. Area was cut blind for GelEx. No DNA in the sample according to NanoDrop measurement. Repeated the next day.

Inoculation of colonies from NanoLuc

Investigator: JH

Procedure:

2x 4 ml LB+Cam media
Each culture was inoculated with one colony
Incubation at 37°C overnight

Wednesday, June 15th

Subcloning of P41 (strong RBS-p(cat)) Insert into pSB1C3

Investigator: CG

Aim of the experiment: Moving P41 (pSB1A2; Pcat+weakRBS) to pSB1C3 for biobrick submission. No gel extraction was performed because the fragement is too small to visualize on the gel.

Procedure:

Digestion of P41 with XbaI and PstI (10 µl DNA, 1,5 µl each enzyme, 3 µl CutSmart buffer x10, 1 µl FastAP, 13 µl ddH2O) -> Incubation at 37°C for 2 h, heat inactivation at 80°C for 20 min.

fragement is to small to visualize on agel.

Subcloning into F31: 3.8 μL F38, 6.2 μL F31, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase according to the SOP
Transformation into E. coli XL1 according to the SOP

Miniprep of pSB1C3(Nanoluc)

Investigator: LK

Aim of the experiment: Preperation of a BioBrick with NanoLuciferase in pSB1C3

Procedure:

The Miniprep was done according to the protocol.
The two tubes where pooled.
The new Plasmid is found under P54 and was sent to sequencing.

Polymerisation

Investigator: EU

Aim of the experiment: Determine optimal polymerisation conditions for BSA and Collagen

Procedure: The experiment was performed in a 96 Well plate:

Results: maximum concentration of Streptavidin and biotinylated Protein works best. Collagen does not work. Glycerolconcentrations do not inhibit interaction. Reaction might be to slow at given concentrations to be effective in printing process.

MidiPrep of pSB1C3 with RFP generator (P4)

Investigator: NA

Aim of the experiment: purification of pSB1C3 with RFP generator for further processing (P56)

Procedure:

MidiPrep was performed according to manufacturer's protocol (QIAprep MidiPrep, Qiagen)

Results: Concentration very low (12ng/μL), but high volume (500 μL)

Thursday, June 16th

MiniPrep of F36 (Ligation mRuby in pSB1C3) K1 & K2, F37 (Ligation EGFR in pSB1C3), I13453 (pBad promotor) K1 & K2, K577881 (pC+AraC+pBad+GFPc) K1 & K2

Investigator: CR

Aim of the experiment: isolate Plasmids

Procedure:

MiniPrep was performed according to manufacturer's protocol (QIAprep MiniPrep, Qiagen)
Plasmids were named as following: [concentration]

F36 K1: P57 [212,9 ng/μL]

F36 K2: P58 [181,3 ng/μL]

F37: P59 [195,5 ng/μL]

K577881 K1: P60 [557,2 ng/μL]

K577881 K2: P61 [791,9 ng/μL]

I13453 K1: P62 [130 ng/μL]

I13453 K2: P63 [460 ng/μL]

Sequencing of P29 (double terminator), P36 (Tet repressed RFP) and P37 (Tet repressed YFP)

Investigator: JB

Aim of the experiment: Sequencing of P56, P57, P59, P61 and P62

Procedure: According to the manufacturer's protocol.

P56: FR11326618 (VF2)
P57: FR11326617 (VF2)
P59: FR11326616 (VF2)
P61: FR11326613 (VR), FR11326615 (VF2)
P63: FR11326614 (VF2)

MidiPrep P4 (pSB1C3)

Investigator: VL

Aim of the experiment: isolate Plasmids

Procedure:

MidiPrep was performed according to manufacturer's protocol (QIAprep MidiPrep, Qiagen). Centrifugation steps at 20,000 g performed at 12,500 rpm in special centrifugation tubes. Since only one column was left, both prepped cell pellets were applied to one column. Flow-through and wash was collected.
Conc:

Amplification of BioBricks (overnight cultures for minipreps)

Investigator: JB

Aim of the experiment: Inoculation of 5 ml overnight cultures for minipreps. The following biobricks were used:

BBa_K157012
BBa_K243004
BBa_K243006
BBa_K157001
BBa_K243005
BBa_I712009
BBa_K404108
BBa_K782061
BBa_K1371012
BBa_K782060

Procedure:

Three hours of incubation of the tubes containing the bacterial agar at 37°C (Note: 12 hours are actually recommende)
Inoculation of two times 5 ml preculture containing the appropriate antibiotic per clone. For KanRAmpR (reistance against both ampicillin and kanamycin) it was only selected for ampicillin.
Incubation shaking overnight at 37°C

PCR Amplification of genesynthesis 2 (F29; IRES-BirA)

Investigator: LK

Aim of the experiment: Amplification of Genesynthesis_2 (IHRES_BirA_StrepTag)

Procedure: A 50µl approach was made:

33,5 µl Water
2µl DNA (F29, diluted 1:10)
2,5µl of each Primer (O11 and O12 c:10µM)
0,5µl dNTPmix
5µl Reaction buffer
0,5µl Q5-Polymerase
The Annealing Temp. was set an 58°C
Next step is to run an analytic gel (band should be visible at 1,5 kB)

Friday, June 17th

Cloning of genesynthesis 2 (IRES-BirA) into pSB1C3

Investigator: CG, NA, JH

Aim of the experiment: Purification oft he PCR reaction, gel verification, restriction digestion (F29), ligation with F31 and transformation

Procedure:

Yesterdays PCR was purified according to Qiagen PCR purification kit
An anlaytic gel electrophoresis was performed on a 1% gel with 4 µl purified PCR product
Restriction digest: 26 µl purified PCR product, 1.5 µl XbaI, 1.5 µl PstI, 5 µl NEB SmartCut, 16 µl H2O. Incubation for 2 h at 37°C.
Gel extraction
Ligation: F31
Transformation

Results: Gel electrophoresis after PCR purification exhibit a thin signal at 1.5 kb. Next time 1:30 min for elongation time might increase the signal.

Miniprep new iGEM BioBricks

Investigator: VL

Aim of the experiment: Purify plasmid DNA from transformed cells

Procedure:

Miniprep according to manual (pellet centrifuged 5000 rpm, 10 min, 4 °C)
Elution with 50 uL EB Buffer
Concentrations (all ng/uL):

K782061 (a) 172.9, (b) 53.0

K243006 (a) 241.1, (b) 58.6

K1371012 (a) 138.0, (b) 43.0

K157001 (a) 184.3, (b) 186.4

K782060 (a) 339.0, (b) 254.0

K243005 (a) 62.3, (b) 176.2

K243004 (a) 122.3, (b) 110.3

I711009 (a) 185.2, (b) 174.7

K157012 (a) 181.2, (b) 195.3

K404108 (a) 116.4, (b) 142.5

MidiPrep of pSB1C3 with RFP generator (P4)

Investigator: NA

Aim of the experiment: purification of pSB1C3 with RFP-Reportercasette for further processing (P74)

Procedure: MidiPrep was performed according to manufacturer's protocol (QIAprep MidiPrep, Qiagen)

Results:

Cloning of IRES-BirA (F33->F40) into digested F31 (pSB1C3)

Investigator: JH, LK

Aim of the experiment: Ligation of IRES-BirA (F29->F33->F40) into F31 (digested P40 by XbaI and PstI = pSB1C3 without insert), gelelectrophoresis and tranformation in XL1blue

Procedure:

F33 (PCR product of F29/gen synthesis 2) was digested with XbaI and PstI
Gelextraction of band at 1500 bp was executed by manufacturers protocol (Qiagen)
intermediate result: F40 with 6.6 ng/µL
Ligation mixtures were prepared as following:
9.6 µL F40, 0.4 µL F31, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase
Transformation: (Saturday)
Transformation of Ligation (F29+F31) into XL-1 blue was done according to the SOP. The plate was incubated until Sunday at 37°C.
3mL-cultures in LB+ 30µg/ml cam where inoculated on Sunday
Mini-prep according to manufacturer's protocol was done on Monday.

PCR, purification and digestion of P19 (EspP) and F28 (mRuby EGFR) for BioBrick creation

Investigator: JB, LK

Aim of the experiment: Amplification of EspP from P19 and mRuby/EGFR (F28) for creation of Biobricks

Procedure (for both fragments):

PCR according to the SOP (primers for P19: O13 and O03, primers for F28: VR and VF2)
PCR purification via the purification kit according to the manufacturer's protocol (concentrations: P19(EspP):119,5 ng/µl F28(mRuby):56,2ng/µl
Analysis on an 1% agarose gel using 5 µl purified PCR product
Restriction digestion with NgoMIV/SpeI (for both cases)
40µl DNA
1,5µl of each Enzyme
2µl ddH2O
5µl CutSmart Buffer
The tubes where incubated at 37°C for ~2 days.

Results: Analytical gel electrophoresis after PCR purification shows thick bands at roughly 1000 bp

Still to do:

Gel extraction of both signals for F28 and one signal for EspP-PCR
Ligation with appropriate vector (e.g. F30)
Transformation

Minipreps of F39 (strong RBS-pcat in pSB1C3)

Investigator: JB

Aim of the experiment: Amplification of F39 (ligation, pCat with strong RBS)

Procedure:

Miniprep according to the manufacturer's protocol
Resulting plasmid: P76
Concentration: 52 ng/µl

Minipreps of pSB1C3 with RFP generator (P4)

Investigator: JH

Aim of the experiment: purification of pSB1C3 with RFP-Reportercasette for further processing (P75)

Procedure:

Minipreps according to the manufacturer's protocol (with 8* 6 mL culture)
Resulting plasmid: P75
Concentration: 142.2 ng/µl [~200 µL]

Inoculation of colony from NanoLuc [P54, Repeat]

Investigator: JH

Procedure:

5 ml LB+Cam media
culture was inoculated with one colony
Incubation at 37°C overnight

Saturday, June 18th

Miniprep of P54 (NanoLuc)

Investigator: LK

Aim of the experiment: Purification of P54 (NanoLuc)

Procedure:

Miniprep according to the manufacturer's protocol
Resulting plasmid: pSB1C3 mit NanoLuc (P54, von )
Concentration: 497,9 ng/µl

Hybridisation of O19 and O20 (StrepTag)

Investigator: LK

Aim of the experiment: Hybridisation of the Strep-Oligos

Procedure: 2µl of each Oligo where diluted in 16µl ddH2O and incubated for 10 min. at 95°. Cooling down at RT for at least half an hour. Stored in fridge

Week 6 (June 20th - June 26th)

Monday, June 20th

Miniprep of F42 (IRES-BirA in pSB1C3)

Investigator: LK

Aim of the experiment: Purification of IRES-BirA Plasmids

Procedure:

Miniprep according to the manufacturer's protocol
Resulting plasmid: pSB1C3 with IRES-BirA

Next Steps:

analytical digestion with EcoRI+PstI and gel (expected bands at 1500 and 2000 Bp)
Sequencing

Results: Concentration: 583,5 ng/µl

PCR and Purification of BirA

Investigator: LK, JB

Aim of the experiment: Amplification of BirA-construct

Procedure:

PCR according to the SOP (primers: O17 and O18)
PCR purification via the purification kit according to the manufacturer's protocol
Analysis on an 1% agarose gel using 5 µl purified PCR product

Results:

Concentration: 185,8 ng/µl --> F41
Analytical gel shows no significant band at 960 Bp -->Repeat

Next Steps:

Repetition of PCR and analytical gel!

Gel and Gelextraction of P19 (QC EspP) and F28 (EspP and mRuby)

Investigator: LK

Aim of the experiment: Purification of both constructs for Ligation

Procedure:

Preperative gel according to SOP
The Purification was done according to the manufacturer's protocol. The EGFR gel-fragment was eluted in 50µl and the mRuby-fragment in 30µl (because of thin band)

Results:

One thick band just before 1000Bp and one lighter band just before 750 Bp. This fits to the lengths of EspP and mRuby.
Concentrations: EspP(now F43): 49,5ng/µl mRuby(now F44): 9,9ng/µl

Next Steps:

Ligation into pSB1C3

Sequencing of F42 (pSB1C3(IRES-BirA)), P54 (pSB1C3(NanoLuc)) , P74 (pSB1C3(RFP generator)) and P76 (pSB1C3(strong RBS-pCat))

Investigator: JL

Aim of the experiment: Sequencing of F42, P54, P74 and P76 in forward direction.

Procedure: Sequencing batches were prepared after manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)

The different plasmids we prepared received the following barcodes:

F42 (VF2): FR11326601
P54 (VF2): FR11326600
P74 (VF2): FR11326599
P76 (VF2): FR11326598

PCR and Purification of genesynthesis 6 (iGEM6) Streptavidin/Traptactin

Investigator: NA

Aim of the experiment: Amplification of gen synthesis 6

Procedure: PCR according to the SOP (primers: VF2 and VR)

Next Steps:

PCR purification via the purification kit according to the manufacturer's protocol
Analysis on an 1% agarose gel using 5 µl purified PCR product
PCR purification via the purification kit according to the manufacturer's protocol
Analysis on an 1% agarose gel using 5 µl purified PCR product

PCR and Purification of BirA (F41)

Investigator: NA

Aim of the experiment: Amplification of BirA (F29)

Procedure: PCR according to the SOP (primers: O17 and O18)

Next Steps:

PCR purification via the purification kit according to the manufacturer's protocol
Analysis on an 1% agarose gel using 5 µl purified PCR product
PCR purification via the purification kit according to the manufacturer's protocol
Analysis on an 1% agarose gel using 5 µl purified PCR product

--> repeat with gene-synthesis 2 (F29 may not be the gene-synthesis 2)

Ligations of StrepTag, EspP and mRuby3 with F30 (digested pSB1C3)

Investigator: JH

Aim of the experiment: Ligations of StrepTag (O19+O20), EspP (F43) and mRuby3 (F44) into F30 (NgoMIV and SpeI; pSB1C3 without insert)

Procedure:

Ligation mixtures were prepared as following:
O19+O20: 1.7 (O19+O20), 8.3 μL F30, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase
F43: 4.6 μL F43, 5.4 µL F30, 2 μL F30, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase
F44: 8.1 μL F44, 1.9 μL F30, 2 μL Ligase buffer, 7 μL ddH2O, 1 μL Ligase
Ligation was incubated overnight at 16 °C

Digestion of GSY5 (Streptactin; F27)

Investigator: LK

Aim of the experiment: Restricting GSY5 into StrepActin fragment (Streptavidin mutant) and Leptin fragment (Leptin is for Volker)

Procedure:

Restriction mix:

32µl DNA (F27)

10µl ddH2O

1µl of each enzyme (SpeI, HindIII, SapI)

5µl cut smart buffer

Next Steps:

Preperative gel, 1,5% Agarose, cut out and purify bands at 80 Bp and 425 Bp. (80 is leptin for volker and 425 is StreptActin for further cloning into pASK)

Results:

Tuesday, June 21st

Plating of BioBricks that didn't survive sequencing

Investigator: JB

Aim of the experiment: Instead of directly inoculating cultures with the transformed cells from the bacterial agar that was sent by the HQ, the bacterial agar was now used for overnight plating on agar plates containing the appropriate antibiotic resistance.

Procedure: Two methods were used for each BioBrick: For the first method, an inoculation loop was used for plating directly. For the second methods, the inoculation loop was used to inoculate a 50 µl LB culture that

Sequencing of various plasmids

Investigator: CG

Aim of the experiment: Sequencing of various plasmids with either VF2 or VR

Procedure: Refer to the “Inventarliste” for detailed informations on sequencing codes and primers. Sequencing batches were prepared according to manufacturer's protocol (15 µL plasmid DNA (50-100 µM) and 2 µL sequencing primer)

PCR of gene synthesises (iGEM_1) (mRuby_EGFR)

Investigator: CG

Aim of the experiment: iGEM_1_mRuby_EGFR (F28) for preparing the EGFR signal (at about 100 bp)

Procedure: Approach:

1µl DNA (diluted, 1:10)
25 µl 2x MasterMix
0,5µl dNTPs
2,5 µl forward Primer VF2
2,5µl reverse Primer VR
Fill up with water up to 50 µl

Setup: (calculated with NEB calc. http://tmcalculator.neb.com/#!/)

98°C_1min initiation step
98°C_10sec
66°C_30sec > step 2-4: 35 repeats
72°C_30sec
72°C_2min final step
4°_hold

Transformation of Ligations of F50 (StrepTag), F51 (EspP) and F52 (mRuby3) in pSB1C3

Investigator: JH

Aim of the experiment: Transformation of StrepTag (F50), EspP (F51) and mRuby3 (F52) in XL1 blue

Procedure: transformation in competent E. Coli XL1 blue according to protocol + rescue (repeat due to incubation with LB+Cam ! )

Result: plates (LB Cam) in incubator for further processing (37 °C)

Digestion of P9 (pASK75), P74 (pSB1C3), P26 (CMV promotor) and F47 (BirA)

Investigator: JB

Aim of the experiment: Digestion of P9 and P74 to gain the vectors pASK75 and pSB1C3, respectively, as well as digestion of F47 (PCR fragment of BirA) and P26 (CMV promoter) for the ultimate creation of biobricks

Procedure: P74 was digested in a total volume of 30 µl, while the others were digested in a total volume of 50 µl. Enzymes used were:

P74: XbaI and PstI
P9: HindIII and XbaI
F47: Xba I and PstI (didn’t work)
P26: SpeI and PstI

The digestions were incubated at 37°C for 40 minutes and were thereafter inactivated at 80°C for 5 mins.

Inoculation of cultures for minipreps for P76 (pCat + strong RBS)

Investigator: JB

Procedure: Inoculation of 2x5 ml cultures with P76 clones. Incubation at 37°C overnight.

Wednesday, June 22nd

Minipreps of P79 (pCat+RBS)

Investigator: JB

Procedure: According to the manufacturer's protocol.

Results: Concentration 212 ng/µl. Sent to sequencing

Transformation of ligation F56 (pASK75(Streptactin)), P60 (pSB1C3 (pC+AraC+pBad+GFPc)) , P70 (pSB1C3 (short linker))

Investigator: CG

Aim of the experiment:' Transformation of pASK75-Streptactin (F56) into E. coli XL1 blue, K577881 (P60) into BL21 and K243004 (P70) in XL1

Procedure: transformation in competent E. Coli XL1 blue according to protocol

Result: plates (LB + appropriate antibiotic) in incubator for further processing (37 °C)

Inoculation of colonies from K157001 (EGFR signal peptide), EspP (F50), mRuby (F51), Strep-Tag (F52)

Investigator: CG

Procedure:

2x 5 ml LB+Cam (Amp for K157001) media
Each culture was inoculated with one colony, for ligations 2 colonies each
Incubation at 37°C overnight

Plateing of K243004 (short linker), K243005 (middle linker) from stab cultures

Investigator: CG

Procedure: For both biobricks: stabing into the agar with the inocluation loop and resuspending in 50 µl LB media. Plating on Amp-agar.

Digestion of P64 (EGFR sgnal peptide) and P71 (CD4 signal peptide) for cloning into F57 (pSB1C3 (CMV promotor))

Investigator: CG

Aim of the experiment: Digestion of P67 and P71 for cloning the resulting fragments into the digested F57 fragement.

Procedure: both plasmids were digested in 50 µl, 3 µg for each plasmid DNA. 1 µl of XbaI and PstI, 5 µl Buffer, 20 µl DNA, 23 µl H2O. The digestions were incubated at 37°C overnight.

Preparative agarose gels for separation of digestion of P64 (EGFR sgnal peptide) and P71 (CD4 signal peptide)

Investigators: NA, JB

Aim of the experiment: Separation of digestion fragments of both digested PCR fragments as well as vectors

Procedure:

P74: XbaI and PstI -> Fragment corresponding to the pSB1C3 vector isolated
P9: HindIII and XbaI -> Fragment corresponding to the pASK75 vector isolated
F47: Xba I and PstI (didn’t work) –> only one fragment at 3 kbp present (weird since that was a gene synthesis pcr)
P26: SpeI and PstI -> Fragment corresponding to the cmv-promoter isolated

Gelextraction of P9, P74 and P26 was executed by manufacturers protocol (Qiagen)

Results:

F55: pASK75 (2,9 ng/µl)
F56: pSB1C3 (23,6 ng/µl)
F57: CMV-Promotor (5,9 ng/µl)

PCR of GSY2 (IRES-BirA) with O17/18

Investigators: LK

Aim of the experiment: Amplification of BirA, using new dilution of GSY2 this time, because last 2 PCRs showed confusing results (bands at 2500)

Procedure:

PCR was performed according SOP
Primers: O17 and O18
Annealing at 68°C

Next Steps:

PCR-Purification
Analytical Gel
Ligation into pSB1C3

QuickChange-PCR of pASK75 with O21 and O22

Investigators: LK

Aim of the experiment: Deleting NdeI from pASK (P03)

Procedure:

QC-PCR was performed according to SOP
Primers: O-021 and O-022
Annealing at 68°C
Elongation time: 3:30 min

Next Steps:

Digestion with DpnI at 37°C for 1h
Purification?
Preperative Gel (band at 960), purification
Ligation into pSB1C3

Verification of PCR and Digestion of F28 (gene synthesis 1)

Investigator: NA, LK

Aim of the experiment: Verification of successful PCR via gel electrophoresis and preparation of EGFR

Procedure:

Gel electrophoresis with 1 kb-ladder
Digestion: 42µl of PCR Purification, 1,5 µl of each enzyme (NgoMIV and SpeI), 5µl of cut smart buffer.
Incubation at 37°C over night

Results:

Next steps:

Preparative gel and gel extraction
Ligation into pSB1C3

Thursday, June 23th

Miniprep of E. coli Xl1-Blue transformed with ligation product P80/81 (mRuby3 K1/2), P82/83 (EspP K1/2), P84/85 (StrepTag K1/2) and Trafo of K157001

Investigator: Jan, Julian

Aim of the experiment: Miniprep of E. coli Xl1-Blue transformed with ligation product F50(K1,2), F51(K1,2), F52(K1,2) and Trafo of K157001

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)
Concentrations:

Plasmid	c [ng/µl]
P80	432,7
P81	294,8
P82	450,5
P83	479,0
P84	108,0
P85	356,0
P86	47,2

PCR of gene synthesises

Investigator: CR

Aim of the experiment: iGEM_1_mRuby_EGFR (F28) for preparing the EGFR signal (at about 100 bp)

Procedure: Approach:

1µl DNA (diluted, 1:10)
25 µl 2x MasterMix
0,5µl dNTPs
2,5 µl forward Primer VF2
2,5µl reverse Primer VR
Fill up with water up to 50 µl

Setup: (calculated with NEB calc. http://tmcalculator.neb.com/#!/)

98°C_1min initiation step
98°C_10sec
66°C_30sec > step 2-4: 35 repeats
72°C_30sec
72°C_2min final step
4°_hold

QuickChange-PCR of pASK with O21 and O22

Investigators: CR

Aim of the experiment: Digestion of PCR product with DpnI to digest methylated DNA

Procedure:

PCR purification of BirA and mRuby/EGFR

Investigator: CR

Aim of the experiment: purification of PCR

Procedure: PCR purification via the purification kit according to the manufacturer's protocol The samples were renamed:

BirA: F59
mRuby/EGFP: F60

The samples were analysed on a 1% agarose gel. Samples were prepared after SOP.

Results:

Transformation of P60 (K577881; pC+AraC+pBad+GFPc K1) and QC P3 (pASK75(SA1))

Investigator: EF, JB

Aim of the experiment: Transformation of Q CP3 in XL1 blue; transformation of p60 in BL21

Procedure: transformation in competent E. Coli BL21 and XL1blue according to protocol

1µl p60 in BL21 7 µl Q CP3 in XL1 blue

Result: plates (+ rescue plates) incubating

Cloning of CD4- and EGFR-signal peptide into pSB1C3-CMV

Investigator: CR

Aim of the experiment: Digestion of P71 and P69 Procedure:

Digestions were prepared as following:
20 µl CD4 (P71); 1 µl XbaI; 1 µl PstI; 5 µl CutSmart; 23 µl ddH2O
7 µl pSB1C3-CMV; P26; 1 µl PstI; 1 µl SpeI; 2 µl CutSmart; µl ddH2O
20 µl EGFR-signal peptide (P67);1 µl XbaI; 1 µl PstI; 5 µl CutSmart; 23 µl ddH2O
Digestions were incubated for 3 h at 37 °C
The Samples CD4- and EGFR-signal peptide were applied to a 2% and the pSB1C3-CMV to a 1% agarose Gel

Results:

--> passt

Next steps:

Ligation of

Cloning of EGFR (F62) / CD4 (F61) signale peptide into pSB1C3-CMV (F63)

Investigator: CG

Aim of the experiment: Gelextraction and ligation of EGFR- and CD4-signal peptide into pSB1C3 and transformation

Procedure:

Gel extraction according to manufacturers protocol (Qiagen): F61 (CD4) 2 ng/µl, F62 (EGFR) 0.6 ng/ µl, F63 (CMV): 45 ng/ µl
Ligation: 1 µl T4 Ligase, 2 µl Ligase buffer, 7 µl H20, 1.8 µl vector and 8.2 µl EGFR insert or 4.3 µl vector and 5.7 µl CD4 insert
Transformation according to SOP
Plating on LB-Cam agar

Friday, June 24th

Analytical digestion and gelelectrophoresis of P83 (EspP K2) and P83 (StrepTag K2)

Investigator: Julian, Niklas, Luisa

Aim of the experiment: Analytical digestion and gelelectrophoresis of P82/83 (EspP K1/2) and P84/85 (StrepTag K1/2).

Procedure:

Batch for analytical digestion for P82-P85 with EcoRI-HF

volume	reagent
0.5/1.0 µl	Plasmid DNA (-/P84)
1 µl	CutSmart buffer (10x)
0.5 µl	EcoRI-HF(10 U/µl)
8/7.5 µl	ddH2O (-/P84)
=10 µl	TOTAL

500px

Sequencing of P80(mRuby3 K1), P83 (EspP K2) and P85 (StrepTag K2)

Investigator: Julian

Aim of the experiment: Sequencing of P80(mRuby3 K1), P83 (EspP K2) and P85 (StrepTag K2)

Procedure:

Sequencing batch were prepared after manufacturer's protocol. (15 µl of plasmid DNA (50 - 100 ng) and 2 µl sequencing primer). Sequencing primer VF2 was used

The different vectors we sequenced received the following barcodes:

mRuby3 in pSB1C3 (P80): FR11326590

EspP in pSB1C3 (P83): FR11326588

Streptag in pSB1C3 (P85): FR11326587

Transformation of E. coli XL1 blue with F64 (quickchanged P3(pSAm1))

Investigator: Niklas

Aim of the experiment: Transformation of E. coli XL1 blue.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of DNA was added to 50 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

The cell suspension was plated on ampicillin plates (inclusive rescue plate) and incubated over night at 37 °C.

Gelextraction of F67(BirA), F68(mRuby), F69(EGFR-TMD), F70(pSB1C3) and F71(pSB1C3)

Investigator: Niklas

Aim of the experiment: Gelextraction of F67(BirA(Digest. F59 [EcoRI; SpeI])), F68(mRuby(Digest. F60 [NgoMIV; SpeI])), F69(EGFR-TMD(Digest. F60 [NgoMIV; SpeI]), F70(pSB1C3(digest. P74 [NgoMIV; SpeI]) and F71(pSB1C3(digest. P74 [EcoRI; SpeI])

Procedure:

Gelextraction was performed by manufacturers protocol (Qiagen).

Cloning of BirA and EGFR-TMD into pSB1C3

Investigator: CR

Aim of the experiment: Generate biobricks with EGFR-TMD and BirA

Procedure:

Digestions were prepared as following:
1. xµl F59 (BirA); 1 µl EcoRI; 1 µl SpeI; 3 µl CutSmart; 23 µl ddH2O
2. 2 µl P74 (pSB1C3 (RFP-generator); 1 µl NgoMIV; 1 µl SpeI; 3 µl CutSmart; 23 µl ddH2O
3. xµl F60 (mRuby/EGFR); 1 µl NgoMIV; 1 µl SpeI; 3 µl CutSmart; 23 µl ddH2O
4. 2 µl P74 (pSB1C3 (RFP-generator), 1 µl EcoRI; 1 µl SpeI; 3 µl CutSmart; 23 µl ddH2O
Digestion was incubated for 3 h at 37 °C

To Do:

Gel (already prepared)
Gelextraction
Ligation
Trafo

Results:

1. band: P74(NgoMiV, SpeI) 2. band: P74 (EcoRI, SpeI)

1. band: F59 2. band: F60

Transformation of EGFR-TMD-pSB1C3 and BirA-pSB1C3 ligations

Investigator: JB

Procedure: According to protocol. Plates were incubated overnight at 37°C.

Chemical biotinylation of BSA

Investigator: MT, JB

Procedure: BSA was chemically biotinylated with a 20x, 40x and 60x molar excess in two different buffers:100 mM Bicin (pH 8.85) and 100 mM borate (pH 8.85) with 50 mM NaCl respectively.

-> A total of six different tubes.

After one hour incubation at RT, the samples were put in the freezer

Inoculation of liquid cultures (F65 and F66)

Investigator: JB

Procedure:

Clones were picked for inoculation of 5 ml liquid cultures containing the appropriate antibiotic
Incubation overnight at 37°C/shaking

Saturday, June 25th

Miniprep of E. coli Xl1-Blue transformed with P60 (mRuby/EGFR),F58 (Ligation pASK75 + Streptactin), F65 (CMV + CD4), F66 (CMV + EGFR), P70 (Short Linker)

Investigator: Niklas

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)
Concentrations:

Plasmid	c [ng/µl]
P87	81
P88	34,5
P89	86,3
P90	108,5
P91	417,4

Analytical digestion and gelelectrophoresis of F64 (quickchanged P3) for verification of succesful quickchange

Investigator: Niklas

Procedure:

Analytical digestion with NdeI and gelelectrophoresis. If quickchange worked there should be a band at about 3200 bp (only one restriction site left)

Incubation over night at room temperature.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

Results:

Just a band showing a few bp (Primer), there is no plasmid band -> Quickchange did not work

Inoculation of colonies from Ligation of F69 + F70 (EGFR-TMD in pSB1C3)and F44 + F30 (mRuby in pSB1C3)

Investigator: Niklas

Procedure:

6x 4 ml LB+Cam media

Each culture was inoculated with one colony

Incubation at 37°C overnight

Sunday, June 26th

Miniprep of E. coli Xl1-Blue transformed with ligation product F44 + F30 (mRuby3 in pSB1C3), F66 + F70 (CMV+EGFR in pSB1C3)

Investigator: Luisa

Aim of the experiment: Extracting F44 + F30 (mRuby3 in pSB1C3), F66 + F70 (CMV+EGFR in pSB1C3) from E.coli XL-1-blue

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)
Concentrations:

Plasmid	c [ng/µl]
P92	162,9
P93	447,9

Repetition of Quick-Change PCR of P3 (pASK + SAm1)

Investigator: Luisa

Procedure:

The QC-PCR was performed according the SOP.

Reaction Mix:

volume	reagent
1,25 µl	Primer O21
1,25 µl	Primer O22
1 µl	dNTP-mix
5 µl	Pfu-Ultra-II reaction buffer
1 µl	template DNA (1:10 dilution of p3)
0,5 µl	Pfu-Ultra-II Polymerase
40,5 µl	ddH2O

digestion of PCR-Product with DpnI for 1h at 37°C

now labeled P94

Transformation of E. coli XL1 blue with P94 (quickchanged P3(pSAm1))

Investigator: Luisa

Aim of the experiment: Transformation of E. coli XL1 blue.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of DNA was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

The cell suspension was plated on ampicillin plates (inclusive rescue plate) for pASK (F72) and on chloramphenicol plates for P92 and P93 and incubated over night at 37 °C in the incubator.

Analytical digestion and gelelectrophoresis of P92 (mRuby), P93 (CMV + EGFR) and P94 (pASK75)

Investigator: Luisa

Aim of the experiment: Analytical digestion and gelelectrophoresis of P92 (mRuby), P93 (CMV + EGFR) and P94 (pASK75).

Procedure:

Batch for analytical digestion for P92 and P93 with EcoRI-HF and PstI-HF

volume	reagent
1 µl	Plasmid DNA
1 µl	CutSmart buffer (10x)
0.5 µl	EcoRI-HF(10 U/µl) and PstI-HF (10 U/µl) for P92/93, NdeI (10 U/µl) for P94
7.5/7 µl	ddH2O
=10 µl	TOTAL

Results:

1. band (P92): no mRuby at 700bp visible, only empty vector
2. band (P93): empty vector and EGFR --> perfect
3. band (P94): no signal at all --> repetition of QC-PCR

Week 7 (June 27th - July 3rd)

Monday, June 27th

Sequencing of P67 (EGFR-Signalpeptid)

Investigator: Niklas

Procedure:

Sequencing batch was prepared after manufacturer's protocol. (15 µl of plasmid DNA (100 ng) and 2 µl sequencing primer (VF2))

FR11326586

Repetition of Quick-Change PCR of P3 (pASK + SAm1)

Investigator: Luisa

Procedure:

The QC-PCR was performed according the SOP.

Reaction Mix:

volume	reagent
1,25 µl	Primer O21
1,25 µl	Primer O22
1 µl	dNTP-mix
5 µl	Pfu-Ultra-II reaction buffer
1 µl	template DNA (1:10 dilution of p3)
0,5 µl	Pfu-Ultra-II Polymerase
40,5 µl	ddH2O

Digestion of PCR-Product with DpnI for 1h at 37°C.

Transformation of 10µl into component E.coli XL-1-blue, according to SOP (1h incubation at 37°C necessary despite AmpR).

PCR of Genesynthesis 3 and 4

Investigator: Luisa

Aim of Experiment: Amplification of Genesynthesis 3 (contains BAP and IGKappa) and 4 (contains A3C5-tag and BM40)

Procedure:

The PCR was performed according the SOP.

Reaction Mix:

volume	reagent
2,5 µl	Primer VF2
2,5 µl	Primer VR2
1 µl	dNTP-mix
10 µl	Q5 Polymerase reaction buffer
1 µl	template DNA (1:10 dilution of p3)
0,5 µl	Q5-Polymerase
18 µl	ddH2O

Setup: iGEM_standard (Promega-cycler)

temperature	time
98°C	2min
98°C	10sec
66°C	30sec
72°C	30sec
72°C	2min
4°C	hold

the batches were then purified using the Quiagen PCR-Purification Kit.

Analytical digestion and gelelectrophoresis of P88 , P89 and P90

Investigator: Niklas

Aim of experiment: Analytical digestion and gelelectrophoresis of P88 (pASK75 + Streptactin, former F58), P89 (CMV + CD4, former F65) and P90 (CMV + EGFR-signal-peptide, former F66)

Procedure:

Batches for analytical digestions:

P88: EcoRI

P89: EcoRI and PstI

P90: EcoRI

volume	reagent
5,8/2,3/1,8 µl	Plasmid DNA (P88/P89/P90)
1 µl	CutSmart buffer (10x)
0.5 µl	EcoRI-HF(10 U/µl)/ PstI
required amount for total volume of 10 µl	ddH2O

Ligation of F67 and F71, Transformation of E. coli XL1 blue afterwards

Investigator: Niklas

Aim of the experiment: Ligation of F67 (BirA) and F71 (empty pSB1C3), Transformation of E. coli XL1 blue afterwards.

Procedure:

volume	reagent
2,4 µl	Vektor
7,6 µl	Insert
2 µl	10X DNA-Ligase-buffer
1 µl	T4-Ligase
7 µl	ddH₂O
=20 µl	TOTAL

CaCl2 competent E. coli XL1-Blue cells were taken out of stock in -80 °C freezer and were gently thawed on ice.

7 µl of DNA was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of 750 µl LB-medium to each tube.

Incubation for 1 hour at 37 °C

The cell suspension was plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C in the cell-culture shaker.

next step: analytic digestion of transformation was successful

Digestion of PCR on genesynthesis 3 and 4, and pSB1C3

Investigator: Luisa

Aim of experiment: Division of Leptin, IGKappa, A3C5, BM40 and BAP using SapI, HindIII, XbaI, AgeI for both batches.

Procedure:

Batches for analytical digestions:

volume	reagent
1 µl each	enzyme (SapI, HindIII, XbaI, AgeI)
5 µl	CutSmart buffer (10x)
41 µl	DNA (purified PCR-products of GSY3 and 4)

Additionally 10µg of the vector P74 was digested with XbaI and AgeI in 100µl batch (2µl of each enzyme, 10µl of Cut-Smart buffer). Digestion was performed over night and purified via gelelectrophoresis and gelextraction according to the manufacturer's protocoll. --> Now labeled F80.

Analytical digestion and gelelectrophoresis of P80 , P78 and P85

Investigator: Julian

Aim of experiment: Analytical digestion and gelelectrophoresis of P80 (mRuby3), P78 (NanoLuc) and P85 (Strep-Tag)

Procedure:

Batches for analytical digestions:

P80 and P78: EcoRI and AgeI

P85: EcoRI and NgoMIV

volume	reagent
10 µl	Plasmid DNA
32 µl	ddH2O
5 µl	CutSmart buffer (10x)
1.5 µl	each enzyme(10 U/µl)/ PstI
50 µl	TOTAL

Ligation of F75 (mRuby) and F76 (NanoLuc) into F74 (pSB1C3 with Strep-Tag) and Transformation into E. coli XL1 blue

Investigator: Luisa

Aim of the experiment: Ligation of F75 (mRuby) and F76 (NanoLuc) into F74 (pSB1C3+Strep-Tag), Transformation of E. coli XL1 blue afterwards.

Procedure:

volume	reagent
4,3µl(for F75), 8,2µl (for F76)	Vector
12,7µl (F75), 8,8 (F76)	Insert
2 µl	10X DNA-Ligase-buffer
1 µl	T4-Ligase
=20 µl	TOTAL

Ligation was incubated at RT for 1,5h.

CaCl2 competent E. coli XL1-Blue cells were taken out of stock in -80 °C freezer and were gently thawed on ice.

7 µl of DNA was added to 100 µl of competent cells and gently mixed.

15 min incubation on ice

5 min. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

Incubation for 1 hour at 37 °C

The cell suspension was plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C in the incubator.

Chemical biotinylation of BSA

Investigator: Niklas

Procedure:

BSA was chemically biotinylated with a 20x and 40x molar excess:

10 ml of 100 mM borate buffer with 50 mM NaCl (pH 8.85)

dissolve BSA (10 mg/ml)

Add biotin-NHS-ester: 20,5 mg for 40x molar excess

reaction over night

Tuesday, June 28th

Preparative digestion and gelelectrophoresis of P83 (EspP) and P29 (DoubleTerminator)

Investigator: Julian

Aim of experiment: Preparative digestion and gelelectrophoresis of P83 (EspP) and P29 (DoubleTerminator)

Procedure:

Batches for analytical digestions:

P83: EcoRI and SpeI

P29: EcoRI and XbaI

volume	reagent
6.5/13 µl	Plasmid DNA (P83/P29)
35.5/29 µl	ddH2O (P83/P29)
5 µl	CutSmart buffer (10x)
1.5 µl	each enzyme
50 µl	TOTAL

Preparative gelelectrophoresis was performed at 80 V for 80 min

Gelelectrophoresis of F73 (pSB1C3 digst. EcoRI, AgeI)

Investigator: Julian

Aim of experiment: gelelectrophoresis of P80 (mRuby3), P78 (NanoLuc) and P85 (Strep-Tag)

Procedure: Preparative gelelectrophoresis was performed at 100 V for 45 min using a pocket spanning over the full width of the 1% agarose gel

Wednesday, June 29th

Transformation of F83 (EspP-Fragment in Double Terminator + pSB1C3), F84 (GSY3 + pSB1C3) F85 (GSY4 + pSB1C3)

Investigator: Niklas

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

7 µl of DNA was added to 50 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

The cell suspensions were plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C.

Thursday, June 30th

Transformation of new E. coli XL1-blue (P75), additional plating of untransformated XL1-blue

Aim of experiment: Quality assurance

Investigator: Niklas

Procedure:

the new competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of DNA was added to 50 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

The cell suspension was plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C.

additional plating of untransformated XL1-blue on Tet-, Cam-, Amp- and Kan-plates

Result:

After 12 hous of incubation there were some (~20) colonies on the 50µl-plate transformed with Cam-resistence-plasmids. The transformation has been succesful, though cells grow slow.
There were no colonies on the kan-, amp- and cam- plates with the untransformed E.Coli. Hence we can assume that there are no other plasmids with resistences against kan, amp or cam in our batch of competent cells.

There are cells on the tet-plate. This was expected.

Friday, June 31th

Transformation of P9 (pASK with Streptavidin WT) and QC-PCR product into new E. coli XL1-blue

Aim of experiment: Tranforming pASK without NdeI-cutting point into E.coli (two batches from diffrent approches were tested). And Transforming pASK_SA1 into E.coli XL-1-blue.

Investigator: Luisa

Procedure:

the new competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of DNA was added to 50 µl of competent cells and gently mixed.

15 min incubation on ice

30 sec. heat shock at 42 °C

Adding of 950 µl LB-medium to each tube. 1h hour incubation at 37°C.

The cells were plated out on Amp-plates (inclusive rescue plate) and incubated over the weekend at 30 °C.

Week 8 (July 04–10)

Monday, July 04

Repetition of the Transformation of QC-PCR product into new E. coli XL1-blue

Aim of experiment: Tranforming pASK without NdeI-cutting point into E.coli (two batches from diffrent approches were tested).

Investigator: Luisa

Procedure:

the new competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of DNA was added to 50 µl of competent cells and gently mixed.

15 min incubation on ice

30 sec. heat shock at 42 °C

Adding of 950 µl LB-medium to each tube. 1h hour incubation at 37°C.

The cells were plated out on Amp-plates (inclusive rescue plate) and incubated over the weekend at 30 °C.

Transformation of P9 (Streptavidin in pASK75) into E. coli BL-21

Aim of experiment: Tranforming pASK with Streptavidin into E.coli BL-21 for Expression.

Investigator: Niklas

Procedure:

the new competent E. coli BL-21 cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of DNA was added to 50 µl of competent cells and gently mixed.

15 min incubation on ice

5&nbspmin. heat shock at 37 °C

Adding of 950 µl LB-medium to each tube.

The cells were plated out on Amp-plates (inclusive rescue plate) and incubated over the weekend at 30 °C

Transformation of F94 (hGH polyadenylation sequence and Nanoluc with StrepTag)

Investigator: Javier

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

7 µl of DNA was added to 50 µl of competent cells and gently mixed.

30 min incubation on ice

45 sec. heat shock at 42 °C

Adding of 950 µl LB-medium.

The cell suspensions were plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C.

Miniprep of E. coli Xl1-Blue transformed with ligation product P108 and P113 (EspP-Fragment in Double Terminator, F81+F82), P109 and P110 (GSY3+ F73 vector AgeI+XbaI ), P111 and P112 (GSY4+ F73 vector AgeI+XbaI)

Investigator: Javier

Aim of the experiment: Extracting P108 and P113 (EspP-Fragment in Double Terminator, F81+F82), P109 and P110 (GSY3+ F73 vector AgeI+XbaI ), P111 and P112 (GSY4+ F73 vector AgeI+XbaI) from E.coli XL-1-blue

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)
Concentrations:

Plasmid	c [ng/µl]
P108	116,2
P109	86,6
P110	136,8
P111	144,8
P112	163,2
P113	123,3

Preparative digestion and gelelectrophoresis of P74 (RFP-Gen.)

Investigator: Julian

Aim of experiment: Preparative digestion and gelelectrophoresis of P74 (RFP-Gen.)

Procedure:

Batch for analytical digestion:

P74: EcoRI and SpeI

volume	reagent
2.5 µl	Plasmid DNA
39.5 µl	ddH2O
5 µl	CutSmart buffer (10x)
1.5 µl	each enzyme
50 µl	TOTAL

Preparative gelelectrophoresis was performed at 90 V for 45 min

Result: pSB1C3 (EcoRI und SpeI) F95

File:Muc16 F95 0407.jpeg

Cloning of F96 (BirA in pSB1C3)

Investigator: Julian

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of DNA was added to 50 µl of competent cells and gently mixed.

5 min incubation on ice

30 s heat shock at 37 °C

Adding of 950 µl LB-medium

Incubation at 37 °C

The cell suspension was plated on Cam-plates (inclusive rescue plate) and incubated over night at 37 °C

Tuesday, July 05th

Preparing of 200 ml TB medium for inoculation of 2 L medium on Thursday

Investigator: Niklas

Procedure:

2.4 g Tryptone 4.8 g yeast extract

800 µl Glycerine

adjust to 180 ml with ELGA-water

seperately: 3.29 g H₂KPO₄ + 0,46 g K₂HPO₄ with ELGA water (Volume = 20 ml)

Digestion of F49 (BirA) with EcoRI and SpeI and cloning in F95 (pSB1C3)

Investigator: Clemens

Procedure:

Digestion of F49 with EcoRI and SpeI

volume	reagent
20 µl	Plasmid DNA (F49)
5 µl	CutSmart buffer (10x)
1 µl	EcoRI-HF(10 U/µl)
1 µl	SpeI(10 U/µl)
23 µl	ddH2O
=50 µl	TOTAL

Digestion was incubated for 1.5 h at 37°C
Digestion was applied to a 1% agarose-gel
Gel ran at 80V for 35 min

File:Muc16 digestF49 0507.jpeg

BirA had a length of 1012 bp
Upper probe was cut from the gel
BirA was purified with gelextraction which was performed by manufacturer's protocol
Concentration was measured
- [F97]= 12.4
Ligation of F97 into pSB1C3 (F95)

volume	reagent
1.2 µl	Vector: pSB1C3 (F95)
8.8 µl	Insert: BirA (F97)
2 µl	T4 DNA Ligase buffer
fill up to 20 µl	dd H₂O
1 µl	T4 ligase
=21 µl	TOTAL

Ligation was incubated at RT for 30 min
Transformation:
- Transformation was performed after SOP
- 7 µl were used for transformation in E. coli XL1blue

Sequencing of P108 - P112

Aim of experiment: Sequencing

Investigator: Niklas

Procedure:

sequencing batches after protocol with following barcodes:

P108 (EspP-Fragment in Double Terminator (F83)) FR11326572 (VF2)

P109 (GSY3+ F73 Leervektor AgeI+XbaI (F84)) FR11326576 (VF2)

P110 (GSY3+ F73 Leervektor AgeI+XbaI (F84)) FR11326575 (VF2)

P111 (GSY4+ F73 Leervektor AgeI+XbaI (F84)) FR11326574 (VF2)

P112 (GSY4+ F73 Leervektor AgeI+XbaI (F84)) FR11326573 (VF2)

NEB Turbo CaCl₂-competent cells

Investigator: Vivien

Procedure:

Inoculate 50 mL LB with 0.5 mL overnight culture of NEB Turbo cells

Incubate at 37 °C for 7 h; final OD₅₀₀: 0.357

Very little growth in the course of the last hour; OD₅₀₀ 0.45 required

Experiment discontinued. Inoculated 3 further colonies in 5 mL LB for o/n growth (37 °C). Repeat experiment on Wed, July 6

Miniprep P114 (NanoLuc + StrepTag + Poly-A in pSB1C3(F94))

Investigator: Niklas

Procedure:

Miniprep was performed after manufacturer's protocol (QIAprep Miniprep, QIAGEN)

Analytical digestion and gelelectrophoresis of P114 and P115

Investigator: Niklas

Aim of the experiment:

Analytical digestion and gelelectrophoresis of P114 and P115 (NanoLuc + StrepTag + Poly-A in pSB1C3 K1 and K2)

Procedure:

Batch for analytical digestion for P114 and P115 with EcoRI+PstI

volume	reagent
1.75 µl	Plasmid DNA P114/P115
1 µl	cut smart (10x)
0.5 µl	EcoRI
0.5 µl	PstI
6,25 µl	ddH2O
=10 µl	TOTAL

Incubation for 45 min at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

Results:

File:Muc16 digestP114 P115 0507.jpeg

1 kbp ladder DNA ladder	P114	P115
	X	X

Inoculation of Quick change of P88 (pASK75 (Streptactin)) preculture

Investigator: Clemens

Procedure:

four colonies were picked from plate
Cells were inoculated in 5 mL LB medium (ampicillin 1:1000)

Analytical digestion of P108 and P113 (both EspP + double terminator (F83)) with EoRI and PstI

Investigator: Clemens

Procedure:

Digestion of F49 with EcoRI and SpeI

volume	reagent
1 µl	Plasmid DNA (P108/P113)
1 µl	CutSmart buffer (10x)
0.5 µl	EcoRI-HF(10 U/µl)
0.5 µl	PstI(10 U/µl)
7 µl	ddH2O
=10 µl	TOTAL

Digestion was incubated for 1.5 h at 37°C
Digestion was applied to a 1% agarose-gel
Gel ran at 80V for 35 min

File:Muc16 analyt.digest.P108 P113 0507.jpeg

P108 and P113 showed the right bands

Wednesday, July 06th

Sequencing of P108 (EspP-Fragment in Double Terminator (F83))

Investigator: >Niklas

Procedure:

sequencing batches after protocol with following barcodes:

P108 (EspP-Fragment in Double Terminator (F83)) FR11326572 (VR)

Digestion of P75 (RFP-Generator) with HincII + dephosphorylation

Investigator: Niklas

Aim of experiment: Blunt-Ligation of BirA into pSB1C3

Procedure:

Digestion of P75 (RFP-Generator) with HincII + dephosphorylation

volume	reagent
3 µl	Plasmid DNA (P75)
2 µl	CutSmart buffer (10x)
0.5 µl	HincII
1 µl	Fast AP (for dephosphorylation)
14.5 µl	ddH2O
=20 µl	TOTAL

Digestion was incubated for over night at 37°C

next steps: PCR of GSY2 with O17 and O18 + phosphorylation, Ligation in digested pSB1C3 afterwards

Cloning of A3C5 Tag into the MiddleLinker-Plasmid

Investigator: Christoph

Aim of experiment: Cloning of A3C5 Tag into the MiddleLinker-Plasmid

Procedure:

Digestion of Middle_Linker Plasmid (P69) with AgeI and PstI

volume	reagent
0.3 µl	Plasmid DNA (69)
2 µl	CutSmart buffer (10x)
1 µl	AgeI
1 µl	PstI
1 µl	Fast AP (for dephosphorylation)
14.5 µl	ddH2O
=20 µl	TOTAL

volume	reagent
0.3 µl	Plasmid DNA (P112)
2 µl	CutSmart buffer (10x)
1 µl	NgomIV
1 µl	PstI
14.5 µl	ddH2O
=20 µl	TOTAL

Digestion was incubated for over night at 37°C, heat inactivation at 80°C for 20 min.

volume	reagent
2 µl	digested Middle-Linker (F99)
8 µl	digested A3C5 (F100)
2 µl	10x Ligase Buffer
1 µl	Ligase
7 µl	ddH2O
=20 µl	TOTAL

Transformation according to SOP in E. coli XL1 blue

Picking of of E. coli XL1 blue with Streptactin in quickchanged pASK75, F84 (digested GSY3), F85 (digested GSY4)

Investigator: Niklas

Procedure:

Streptactin in quickchanged pASK75: Colonies were picked from Amp-plates. (10x)

F84/F85: Colonies were picked from Cam-plates. (8x each)

Picked pipette tips was transferred into cell-culture tubes with air-permeable, sterile cover. Each tube contains 4 mL of LB-medium + 4 µL of the proper antibiotic.

These tubes were transferred in a cell culture shaker at 37 °C and were incubated overnight

Quick Change of mRuby Plasmids

Investigator: Christoph

Aim of experiment: Correction of wrong amino acid within the mRuby sequence

Procedure:

QC according to manufacturers protocol

volume	reagent
10 ng (= 0,3 µl 1:10)	Plasmid DNA (80)
5 µl	10x Pfu Ultra II Buffer
1.25 µl	O23
1.25 µl	O24
0.5 µl	Pfu Ultra II
1 µl	dNTPs
40.7 µl	ddH2O
=50 µl	TOTAL

volume	reagent
10 ng (= 0,3 µl 1:10)	Plasmid DNA (100)
5 µl	10x Pfu Ultra II Buffer
1.25 µl	O23
1.25 µl	O24
0.5 µl	Pfu Ultra II
1 µl	dNTPs
40.7 µl	ddH2O
=50 µl	TOTAL

PCR: 2 min. 98°C initial denaturation, 10 sec. 98°C, 30 sec. Annealing st 60 °C, 5 min 68°C, 35 Cycles

1 h at 37°C DpnI Digestion

Transformation according to SOP in E. coli XL1 blue, QC on mRuby-Strep (F103) was also transformed in E. coli Turbo cells for further investigating the growth rate

Miniprep of Quick Change of pASK75-Streptactin + analytical digestion with Nde1

Investigator: Jan

Procedure:

Miniprep using the kit according to the manufacturer's protocol.

Although cultures seemed to have grown properly, very low and unreliable DNA concentrations were obtained via Nanodrop measurement and no fragment at all could be detected via analytical agarose gel electrophoresis after 90 minutes digestion with Nde1

Creation of competent NEB Turbo cells

Investigator: Jan

Procedure:

250 µl of precultures were used to inoculate 50 ml LB-medium
After an OD=0.45 was reached, cells were put on ice and made competent according to the manufacturer's protocol
50 µl aliquots of competent cells were frozen in liquid nitrogen and stored at -80°C until further use

Inoculation of a BL21 pBAD-GFP (P60) preculture

Investigator: Jan

Procedure:

A single clone was picked in order to inoculate 5 ml LB medium (+Cam)
Culture was grown overnight at 37°C

Inoculation of a BL21 preculture for Streptavidin production (P8)

Investigator: Jan

Procedure:

A clone was picked for the inoculation of 5 ml LB medium
After 6-8 hours of incubation, the 5 ml preculture was used for the inoculation of a 50 ml LB preculture

Thursday, July 07

PCR Amplification of birA (GSY 2)

Investigator: Vivien

Aim: Amplify birA gene

Procedure:

Prepared PCR mix (25 μL reaction volume): NEB Q5 High-Fidelity 2× Master Mix (12.5 μL), ddH₂O (9.5 μL), F29 (1 μL), O17 and O18 (1 μL each)

Cycling protocol: start 1.5 min, 98 °C; 35 cycles 30 s, 98 °C – 45 s, 72 °C – 30 s, 72 °C; final elongation 5 min, 72 °C; end 4 °C

Purified via Quiagen PCR Purification kit following manufacturer's instructions. DNA eluted from column by adding 50 μL EB buffer and heating at 37 °C for 5 min prior to centrifugation.

Results: DNA concentration: 82.7 ng/μL. Stored as F102 at –20 °C

Induction of Streptavidin

Investigator: Vivien

Aim: Induce streptavidin production

Procedure:

Inoculated 2 L TB medium with 50 mL o/n pre-culture and added 2 mL ampicillin (10 mg/mL in 50% EtOH)
Let grow (37 °C, 200 rpm) until OD₅₀₀=0.622 (c. 2.5 h)
Induced with anhydrotetracycline (1:10,000 i.e. 200 μL of 2 mg/mL stock)
Let grow (37 °C, 200 rpm) for 4 h

Results: Induced culture for harvesting (see below)

Production of eGFP

Investigator: Clemens, Vivien, Christoph

Aim: Produce eGFP

Procedure:

Inoculated 50 mL LB+Cam medium with 0.5 mL o/n pre-culture

Let grow (37 °C, 200 rpm) until OD₅₀₀=0.58

Induced with 0.1 mM arabinose (i.e. 100 μL of 50 mM stock)

After 7 h of induction the cells were stored in the fridge overnight for maturation of the GFP-chromophore

Results:

Harvesting of Streptavidin

Investigator: Niklas

Aim of the experiment: Recombinant expression and purification of streptavidin

Procedure:

After expression, cultures were transferred into centrifuge tubes and spun down in the centrifuge (4 °C, 5000 rpm, 20 min, F4X1L rotor)
The supernatant was discarded, and the pellet was transferred into a Falcon and frozen
next steps: resuspending and homogenizing in the PANDA

Team:LMU-TUM Munich/Labjournal

Labjournal

Samples

Transformation of E. coli XL1 blue with Phytochrome B (2–908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Miniprep of pTUM100 with pGAL, pTEF1, pTEF2, pADH and RFC25 compatible RFP generator

Sequencing of RFP-Generator (RFC25, pSB1C3)

Picking of of E. coli XL1 blue with Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Analytical digestion and gelelectrophoresis of RFP-generator (RFC25, pSB1C3, P4 & P5)

Sequencing of pTUM vectors with pGAL, pADH, pTEF1, pTEF2

Miniprep of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3)

Analytical digestion and gelelectrophoresis of Phytochrome B (2-908 N-terminal amino acids) (BBa_K801031, RFC25, pSB1C3), P7 - P10

Transformation of E. coli XL1 blue with

Week 1, May 16th - May 22nd

Monday, May 16th

Streptavidin Plasmid Check

Streptavidin Expression: Transform BL21

Tuesday, May 17th

SDS Gel Analysis

MiniPreps pSb1C3–AviTag, –A3C5 and pASK75–(SA1), –(SAm1)

Inoculation of Pre-Culture with BL21 (pASK75 (SA1)) in LB Medium

Wednesday, May 18th

Repeat Analytical Gel of pSb1C3–AviTag, –A3C5

Inoculation of BL21 (pASK75 (SA1)) Culture in 2 L TB Medium and Induction of Streptavidin Production by Addition of Tetracycline

Expression and Harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB Medium

Dialysis of eGFP

MiniPrep of quickchanged pNGAL146-A2 EspP

Sequencing of P14 (Avi-Tag), P15 (A3C5) & P19 (Quick change (QC) EspP in pNGAL-A2)

Digestion of P16 , P17, P18 & P19 (all QC EspP in pNGAL-A2) with AgeI & HindIII + analytical gel

Thursday, May 19th

Re-Sequencing of P19

Cloning of A3C5 and Avi-Tag into pSB1C3

Streptavidin refolding

Biotinylation of BSA

Friday, May 20th

Qualitative analysis of streptavidin expression

Cloning of A3C5 and Avi-Tag into pSB1C3

Transformation of Biobricks in XL1-blue

Ammonium sulfate precipitation of streptavidin

Dialysis of biotinylated BSA

Week 2 (May 23rd - May 29th)

Monday, May 23th

Cloning of A3C5 and Avi-Tag into pSB1C3

Filtration of Streptavidin and precipitation with Ammonium-sulfate

Inoculation of pre-culture with BioBricks in pSB1C3 in LB-Cam

Retransformation of Biobricks in XL1-blue

Tuesday, May 24th

Inoculation of pre-culture with BioBricks in pSB1C3 in LB-Cam

Cloning of A3C5 and Avi-Tag into pSB1C3

Ammonium sulfate precipitation

MiniPrep of BioBricks in pSB1C3 (inoculated on May 23th)

Sequencing of P23 (weak RBS), P24 (double terminator) & P24 (Tet repressed GFP)

Wednesday, May 25th

Inoculation of pre-culture with tet-repressed GFP (P25) in LB-Cam

MiniPrep of K747096, I14033, R0040, B0015, K577893 and B0032

PCR of P19 (QC EspP) with O3 and O4

Digestion of PCR of EspP (P19 with O3 and O4)

Sequencing of P26 (CMV promotor), P27 (p cat promotor), P28 (Tet repressible promotor), P30 (Tet repressed GFP)

Ion exchange chromatography of eGFP

Thursday, May 26th

Inoculation of cultures with XL-1 F11 and F12 clones

Cloning of ligation F14 +F13

Transformation of Biobrick B0034 in XL1-blue

Transformation of Biobricks K577895 and K577894 in XL1-blue

SDS-PAGE of eGFP-fractions after IEC

Friday, May 27th

Inoculation of pre-cultures with B0034 (strong RBS), K577894 (Tet repressed YFP), KK577895 (Tet repressed RFP), F13+F14

Inoculation of BL21 (pASK75 (SA1)) culture in 2 L TB-Medium and induction of streptavidin production by addition of tetracycline

Re-sequencing of P30 (Tet repressed GFP in pSB1C3)

Expression and harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB-medium

Cloning of A3C5 and Avi-Tag into pSB1C3

Cloning of A3C5 and Avi-Tag into pSB1C3

Week 3 (May 30th - June 5th)

Monday, May 30th

Cloning of A3C5 and Avi-Tag into pSB1C3

Religation of F13 (digest of pSB1C3 with AgeI and NgoMIV) and transformation in XL1 blue

Inoculation of pre-cultures with B0034 (strong RBS), K577894 (TET repressed YFP), KK577895 (Tet repressed RFP), F13+F14

Tuesday, May 31th

Dialysis of eGFP

Expression and harvest of Streptavidin (pASK75 (SA1)) in BL21 in TB-medium

Transformation of P30 (Tet repressed GFP)